Availability
You prime your system of air and stale nitrous before a run for faster times and that great purge cloud effect. Nitrous Express Poly Purge lines enable you to eliminate the need for bending hard lines when upgrading your purge line routing. Replacement sets include 10 ft. of 1/8 in. poly hose and one pushlock fitting. Make it easy on yourself and improve your setup.
( 2 )
$26.24
Nitrous Express nitrous line kits make for super-clean installs, keeping hoses nice and tight for your specific application. You can feel safe adding this plumbing to your nitrous system. They feature anodized aluminum ends and braided stainless steel hose. Use Nitrous Express secure plumbing for your nitrous and fuel lines.
Not Yet Reviewed
$67.51
Nitrous Express purge valve kits help you to rid your nitrous lines of vapors. Depending upon your system, these kits include a -4 AN or -6 AN manifold, a push button, and a vent tube. They are available in a variety of styles; choose the model best suited for your vehicle and nitrous setup.
( 11 )
$47.71
—
$190.81
Nitrous Express bottle transfer kits are designed to allow you to refill your nitrous bottle without the use of a compressed air source. They are able to do this by creating a pressure differential between the two bottles, caused by simply cooling the receiving bottle. Nitrous Express bottle transfer kits include a stand, lines, and a control valve.
Not Yet Reviewed
$186.54
Nitrous Express nitrous refill pump stations will allow you to fill your own nitrous bottles. They include the control valve and nitrous transfer lines. The refill pump stations feature the run dry technology for easy transfer.
Not Yet Reviewed
$1,416.30
—
$1,792.22
Nitrous Express Holley Hi-Ram plenum plate conversion kits bolt between the upper and lower intake manifold on Holley Hi-Ram manifolds for a quick and clean install. Nitrous and fuel are injected into each cylinder from the side of the runner, providing direct port-like distribution without having a flow-restricting nozzle or spray bar in the runner. High-tech Holley Hi-Ram plenum plate conversions are made from billet aluminum with passages machined directly into the plate, so there's no need to worry about spray bars breaking or spinning.
Not Yet Reviewed
$954.31
The Nitrous Express LS 102mm plate conversions feature a billet nitrous plate that fits all LS engine series intakes. These plates bolt between the throttle body and intake, making installation quick, easy, and attractive. The plates are pre-machined with a second set of nitrous and fuel passages—so you can easily upgrade to a dual-stage system later on. Order the nitrous oxide plate recommended for your vehicle and engine application.
Not Yet Reviewed
$405.50
If you're just getting into nitrous, or are on a budget, and you're looking for a powerful basic system that you can upgrade to higher performance later on, Nitrous Express has the answer. Their Hitman Plus systems can deliver from 50 to 200 hp, in 50 hp increments, right out of the box. However, you can upgrade them to 300 hp just by changing the nitrous solenoid and jetting, or you can jump up to full Stage 6 levels whenever you want. Kits include the nitrous distribution plate, bottle and mounting brackets, supply hose and fittings, switch, wiring, and solenoids.
Not Yet Reviewed
$806.59
You'd be crazy to throw water into a gas tank and expect to get anywhere—but power and torque can be increased if you inject it into the incoming air charge with Nitrous Express water/methanol injection systems. Cooling the air charge allows for increased timing and the resulting performance benefits. These versatile units have a wide-open throttle switch for naturally aspirated vehicles and an adjustable boost-activated switch for forced induction models. Nitrous Express systems inject a fixed amount of fluid when the WOT switch or boost is activated—and continues until the switch opens again. They reduce intake temperatures and the need for timing retard when used with nitrous. Stage II kits come complete with a high-output pump, 3 qt. reservoir, nozzle, boost activated progressive controller, switch, hardware, and detailed instructions. Water has always been used to cool down motors, but with Nitrous Express water/methanol injection systems … it'll be heating things up!
Not Yet Reviewed
$1,014.32
—
$3,398.40
You'd be crazy to throw water into a gas tank and expect to get anywhere—but power and torque can be increased if you inject it into the incoming air charge with Nitrous Express water/methanol injection systems. Cooling the air charge allows for increased timing and the resulting performance benefits. These versatile units have a wide-open throttle switch for naturally aspirated vehicles and an adjustable boost-activated switch for forced induction models. Nitrous Express systems inject a fixed amount of fluid when the WOT switch or boost is activated—and continues until the switch opens again. They reduce intake temperatures and the need for timing retard when used with nitrous. Stage III kits come complete with a high-output pump, 3 qt. reservoir, nozzle, boost/RPM activated progressive controller, switch, hardware, and detailed instructions. Water has always been used to cool motors down, but with Nitrous Express water/methanol injection systems … it'll be heating things up!
Not Yet Reviewed
$1,376.72
—
$1,628.74
You'd be crazy to throw water into a gas tank and expect to get anywhere—but power and torque can be increased if you inject it into the incoming air charge with Nitrous Express water/methanol injection systems. Cooling the air charge allows for increased timing and the resulting performance benefits. These versatile units have a wide-open throttle switch for naturally aspirated vehicles and an adjustable boost-activated switch for forced induction models. Nitrous Express systems inject a fixed amount of fluid when the WOT switch or boost is activated—and continues until the switch opens again. They reduce intake temperatures and the need for timing retard when used with nitrous. Stage I kits come complete with a high-output pump, 3 qt. reservoir, nozzle, switch, hardware, and detailed instructions. Water has always been used to cool motors down, but with Nitrous Express water/methanol injection systems … it'll be heating things up!
( 4 )
$1,233.88
It used to be that big horsepower increases required major internal engine modifications. However, Nitrous Express has a way that's a whole lot easier--and cheaper. Just bolting one of their EFI single nozzle nitrous systems onto your domestic or import can add from 35 to 150 hp to a V8, with intermediate choices of 50, 75, and 100 hp (with a maximum of 75 hp for fours and sixes.) These systems rely on a Nitrous Express Shark performance nozzle and will work with standard fuel pumps, without any timing retard. The kits include the nitrous bottle, nozzle, hoses, solenoids, wiring, and mounting hardware.
( 2 )
$781.77
—
$905.00
It's assuring to know that control of your fuel is only inches away. Now you can manually close off your fuel flow with one of these Nitrous Express fuel shut-off valves. They're available in a variety of styles, sizes, materials, and finishes.
( 2 )
$246.16
When you decide to put a bottle under your hood, you want performance that makes you go fast; you expect durability for consistent, safe performance and, if at all possible, a good value. Proton Plus Series nitrous systems from Nitrous Express combine your wants and needs in a compact and easy-to-mount module. Constantly researching and developing to provide you with safe, reliable nitrous systems, Nitrous Express Proton Plus Series systems will exceed your expectations. These nitrous systems contain high-quality solenoids that are capable of producing 150 hp to the wheels, and their black anodized aluminum housing not only looks great, but it also pulls heat away from the solenoids for extreme durability. Proton Plus Series nitrous systems include jetting for 35, 50, 75, 100, 125, and 150 hp. They are available without a bottle or in three bottle sizes, including a lightweight 10 lb. composite bottle with an aluminum high-flow Lightning 45 bottle valve and stainless bottle brackets. Live and dream nitrous oxide with Nitrous Express--the people who are passionate about nitrous oxide. Additional features include: * Single Shark nozzle * Nozzle adapter * Stainless braided nozzle lines * Extra-long braided stainless feed line * Stainless fuel line * Master arming switch * Wide-open throttle switch * 40 amp relay * Relay harness * Every nut, bolt, and electrical connector needed to complete the installation
( 26 )
$527.86
—
$1,527.34
Nitrous Express Lightning solenoids are designed to strike with efficient performance. Each is created with a raised inlet and a bottom exit that eliminates up to four 90 degree turns and one expansion area in the body of the solenoid—making it more effective to maximize power. Plus, each NX solenoid has a bypass (purge) port which allows you to connect a small bypass/return line to your tank; or connect a purge valve directly to the body of the nitrous solenoid, thus ensuring there is no trapped air in your system. The replacement solenoids are CNC-machined from lightweight billet aluminum, anodized, and then topped with carbon fiber cans for the ultimate in weight savings and appearance. Amplify performance with bolts of horsepower from Nitrous Express Lightning solenoids. They're available in a variety of sizes, flow limits, and types—for either nitrous, gasoline, or alcohol.
( 9 )
$151.06
—
$503.27
Nitrous Express 4-bolt plate systems for GM LS-style engines feature a billet 90mm or 102mm nitrous plate that installs between the throttle body and intake manifold, making installation quick, easy, and attractive. Power levels can be adjusted between 50, 100, 150, 200, 250, 300, 350 and 400 horsepower. The systems are pre-machined with a second set of nitrous and fuel passages so you can easily upgrade to a dual stage system down the road. (Special note: These kits will work on 2010 and newer Camaros if you rotate the throttle body 180 degrees.) Order the model best suited for your setup. Systems include: * 90 or 102mm nitrous plate * Choice of no bottle, 5 lb., 10 lb., 12 lb., or 15 lb. bottle * Stainless bottle brackets (except no bottle system) * ProPower Lightning Series solenoids * 6 AN feed line * Braided stainless steel solenoid to plate lines * Master arming switch * WOT switch * Every nut, bolt, and electrical connector needed to complete installation
( 3 )
$857.57
—
$1,634.76
Purge the air from your lines with Nitrous Express mainline nitrous oxide purge systems to allow for the immediate activation of your nitrous system. They allow you to purge the system, even without a purge port built into your solenoids, and they can also be used to lower the bottle pressure for spot-on performance every time you activate the systems. They are available in two hose sizes. Includes: * Purge solenoid * 4 AN adapter fitting * Push-button activation * 1/8 in. to 1/8 in. NPT fitting * 1/8 in. NPT to compression fitting * 7 in. of 3/16 in. stainless tubing
( 22 )
$131.21
If you're a serious nitrous junkie on a tight budget, Nitrous Express has just what you need. MainLine EFI nitrous systems are designed to offer budget-friendly performance. With these systems, you get a bottle, brackets, Piranha nozzle, braided hoses, feed line, and fittings. There's no chrome, no frills--just rock-solid performance at an affordable price!
( 5 )
$524.91
—
$1,011.08
Nitrous Express stand up flat mount nitrous bottle brackets look great and are easy to use. The base area that holds the bottle is lined with nylon so your nitrous bottles do not get scratched and slide in place with ease. At the top of the bracket is a rubber O-ring style gasket to hold the bottle in place and prevent damage from occurring while mounting. The large knurled knob allows you to quickly secure or remove the bottle without tools. These brackets are light weight and come in at just over 3 pounds.
Not Yet Reviewed
$373.45
Never be satisfied with the status quo! It is time for the next generation in crossbar nitrous plate technology. The CNC machined design eliminates round spray bars resulting in excellent atomization and cylinder distribution without rotation, sagging, or the disruption of airflow. These CNC-machined plates include a nitrous bottle with a custom solenoid. The Lightning Series solenoids feature CNC aluminum bodies with an integrated purge port, which allows for connecting a purge valve directly to the body of the nitrous solenoid, for less plumbing and clean looks. The kits also come with fittings, lines, switches, relays, and every nut, bolt, and electrical connector needed for installation.
( 4 )
$1,003.47
—
$2,574.93
Space can be at a premium in some engine compartments. Nitrous Express Piranha nozzle nitrous systems are designed to deal with that problem and still give you big-time power increases. They're built around NX's compact, yet highly effective Piranha nozzles and can deliver from 100 to 250 extra horsepower for 4-cylinder engines (including the air-cooled Volkswagen). For sixes, the power jumps range from 150 to 375 horses, and V8s can get boosts of 200 to 550, or even 600 hp. The kits come with nozzles, delivery lines and fittings, jets, solenoids, wiring, switches, and mounting hardware.
( 1 )
$634.70
—
$2,711.33
Nitrous Express bottle nipples are designed to connect the braided stainless steel nitrous feed line to the bottle valve. They are made of stainless steel and are available for -4 AN and -6 AN braided hose sizes.
( 3 )
$12.29
—
$19.10
Nitrous Express has a nitrous system for people with carbureted vehicles whose high performance philosophy is "too much is almost enough." Their Pro Power plate systems crank out power in spades, from a 100 to as much as a 500 hp increase over stock at the wheels. The heart of these systems is the "Next Generation" Phase 3 distribution plate, which has no spray bars to sag, split, or disturb the airflow into the manifold. Race fuel is required for increases above 150 hp. The kits come complete with: * Nitrous bottle and stainless steel mounting brackets * Solenoids * Relay * Supply line and fittings * Switches * Wiring * Mounting hardware
( 2 )
$776.57
—
$2,198.68
Nitrous Express NX billet crossbar nitrous plate systems feature a CNC machine-designed billet aluminum plate which eliminates round spray bars--resulting in excellent atomization and cylinder distribution. With no spray bars to sag, rotate, or disrupt airflow, this is truly the Next Generation in crossbar nitrous plate technology. They are available with or without the nitrous bottle; and include the billet aluminum Lightning 45 bottle valve packed with features like two integrated gauge ports, a 5/8 in. siphon tube, a large .325 in. orifice, and an improved flow path with only one 45 degree turn. The Lightning 45 bottle valve looks great, flows great, and weighs nearly one full pound less than the old style brass valve. These systems also include a custom solenoid bracket, billet aluminum Y-fittings, braided stainless solenoid to plate lines, nickel plated fittings, wide open throttle switch, master arming switch, 40 amp relay, and relay harness.
( 2 )
$1,149.22
—
$1,235.84
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
