Availability
On Sale
Holley offers a selection of both dedicated and universal-style fuel lines for their carburetors. Hard lines are chrome plated and double flared at the outlets. Braided stainless steel lines offer premium features such as rugged billet-style construction and AN aluminum fittings.
( 171 )
$113.95
$102.55
On Sale
Holley 100 gph in-line electric fuel pumps are designed for high-output naturally aspirated and forced induction EFI and carbureted vehicles. They support up to 900 EFI or 1,050 carbureted horsepower, and is compatible with pump gas, race gas, diesel, or E85. The pumps utilize inlet and outlet connections that make installation easy on new applications and quick replacement of existing competitor fuel pumps. Holley universal 100 gph in-line electric fuel pumps include a male -6 to -8 AN discharge fitting with integral high-pressure check valve, terminal nuts, terminal boots, and installation instructions. Additional features and specs: * Roller vane design provides fuel pressure and volume to support up to 900 EFI N/A or 700 EFI boosted horsepower * Compatible with Flex Fuel (E85/E90) and all types of gasoline (100 percent alcohol fuels may diminish fuel pump life) * Inlet thread is -10 AN female ORB (O-ring port fitting) and discharge is a female -6 AN ORB
( 24 )
$217.95
$196.15
On Sale
Holley universal, in-line fuel pumps are intended for fuel injection systems. They are designed to work in-line, not inside the tank, so installation is a snap. They're all rated for continuous duty service and have been tested up to 2,500 hours. The high-output versions are great for serious performance work. These pumps should be mounted below the fuel level of the tank for a good gravity feed on the inlet side. Features include: * OE-proven design * Lightweight and compact * Fits most EFI applications including turbo and supercharged * Not for use on aircraft of any type
( 41 )
$190.95
—
$318.95
$171.85
—
$287.05
Holley vacuum line cap kits feature a selection of different sized vacuum tube caps. These caps are an indispensable addition to any professional tool kit.
( 13 )
$19.58
On Sale
Holley carburetor bypass style fuel pressure regulators are designed for systems that require a return line back to the tank. They're used for carbureted applications only, and are preset at 7 psi. The regulators are made of aluminum and feature a natural or black finish.
( 204 )
$81.09
On Sale
Holley double adjustable fuel pressure regulators are designed for belt or cable driven pumps where fuel flow changes with engine rpm. Made from billet aluminum, they are offered in 2-port and 4-port models to complete your fuel system requirements, and the idle adjustment design is strategically placed so that none of the ports are blocked, like other designs. Features include: * Compatible with E85 and alcohol * Individual adjustment settings, one for idle and wide open throttle * Fuel pressure adjustability at idle can help prevent flooding at low rpms * Wide-open throttle settings help to prevent fuel starvation at the top end of the rpm range
Not Yet Reviewed
$389.95
$214.95
On Sale
Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 29 )
$1,249.95
—
$1,499.95
$1,123.95
—
$1,348.95
On Sale
Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 9 )
$1,349.95
—
$2,149.95
$1,213.95
—
$1,933.95
On Sale
Holley's Street Avenger 4-barrel carbs offer trouble-free operation in an easy-to-install package. They're calibrated to deliver the performance that you need, without the tuning headaches involved with other carbs. And all of this comes with a silver or color-anodized finish that'll look great under your hood. Street Avenger carburetors are available in different sizes and cfm ranges, with manual or electric choke, for a variety of engine applications. Features include: * Tunable metering system * Fuel filters in the primary and secondary fuel bowls * Center-hung floats * External float adjustments * Electric or manual choke * Emissions accessory ports * Adjustable secondaries * Power-valve saver * Dual-feed conversion fuel line
( 199 )
$699.95
$603.95
—
$671.95
On Sale
Holley bypass fuel pressure regulator kits are part of a complete line of fuel system products from Holley. Offering several different kits, each features a billet or diecast aluminum regulator with an adjustable psi for precise fuel pressure changes and they are finished for corrosion resistance and good looks. The regulators are fitted with a 1/8 in. NPT gauge port and include an Earl's fuel pressure gauge, three adapter fittings, a barbed fitting for the vacuum port, a mounting bracket, and all necessary hardware. Choose the kit to best fit your project's needs and performance.
( 30 )
$349.95
$140.95
—
$331.95
On Sale
Holley 4150 Double Pumper carburetors are a perfect upgrade for hot street cars and race vehicles—they're an American icon when it comes to performance. From their roots as the premier carb on many factory muscle cars, to powering thousands of vehicles across the finish line, the Double Pumper is a great choice—whether you're burning up the street or the quarter-mile. The Double Pumper is designed for use on lightweight vehicles with a manual transmission—or an automatic transmission with a high stall and low rear-end gears. These carburetors are available in a gold dichromate or tumble polished shiny finish, along with these features: Dual accelerator pumps for additional fuel under initial acceleration; mechanical secondaries for great performance; dual feed fuel inlets for constant high-volume fuel delivery; and a manual choke for easy control of engine warm up. Order the model with options to suit your application.
( 133 )
$799.95
$628.95
—
$899.95
Designed as a bolt-on replacement for GM's venerable Quadrajet, Holley's 4175 carburetors utilize a front-mounted fuel bowl fitting, allowing you to reuse the stock fuel line. Other features include vacuum secondaries, power valve blowout protection, a spread bore flange, and a choke.
( 4 )
$799.95
On Sale
Holley Sniper offers OE-style 255 lph EFI fuel pump modules for a wide range of vehicles, including many Chevy, Pontiac, Buick, Oldsmobile, GMC, Ford, Mercury, Jeep, Dodge and Plymouth cars and trucks from the 1950s, '60s, '70s, and '80s. These in-tank modules are high-pressure units that flow 255 liters per hour (LPH) and are capable of supporting electronic fuel injection (EFI) engines producing up to 550 hp. A pre-calibrated fuel level sending unit designed to work with the factory fuel gauge for this application is included. Each module also features a HydraMat filter which has a unique internal reservoir that keeps fuel available at the pick-up and also provides protection from contaminates. Fuel pressure is internally regulated to 58 psi, eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator; no separate return line is required because these modules return excess fuel right inside the tank! The Holley Sniper EFI fuel pump module was designed as a direct replacement for your factory pick-up and sending unit. There's no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line—just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line.
( 10 )
$399.95
—
$525.95
$285.95
—
$472.95
On Sale
Holley Sniper in-tank retrofit fuel pump modules offer the easiest way to convert your vehicle to an in-tank EFI fuel system. Available in return and returnless versions, these 340 lph pumps are easy to install with basic hand tools and require no welding or fabrication. They include a diecast pump hanger bracket to control pump vibration in a low-profile design that's perfect wherever space is at a premium. You can locate the module beside your existing sending unit anywhere in the tank and rotate it a full 360 degrees to work flawlessly with various plumbing and wiring configurations. Once the module is installed, all you need to do is connect your power source/ground and fuel lines. Up your fuel game with an assist from the Holley Sniper in-tank retrofit fuel pump modules best suited for your application. Features and specs include: * Models available for various fuel tank depths, including adjustable (7-12 in.) versions * The low-profile design is only 1.275 in. thick above the tank mounting surface for added clearance when needed * The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations * Diecast aluminum construction for corrosion resistance and long-lasting good looks
( 28 )
$649.95
$314.95
—
$583.95
On Sale
Part of Holley's complete line of fuel system products, Holley HP billet fuel pressure regulators are available in a variety of configurations for carbureted or fuel injected engines. Some versions are even adaptable to either carburetors or EFI. They allow you to upgrade a carbureted system to EFI without replacing the fuel pressure regulator. All HP billet fuel pressure regulators feature a 2-port design, provide for precise fuel pressure adjustments, and are available in your choice of demand (no return line) or by-pass (with a return line) styles. Depending on the model, they are for use only with electric fuel pumps, or with either mechanical or electric pumps. Designed for street/strip applications, they are CNC-machined from 6061 T-6 billet aluminum for strength and have bright dip anodized black bodies with clear dip anodized tops for corrosion resistance and good looks. Whatever your fuel system needs, Holley has you covered. Depending on model, features may include: * Adjustable from 4 to 65 psi for use with EFI or carburetors * 4.5 to 9 psi adjustment range for use with carburetors only * EFI-only models are adjustable from 15 to 65 psi * Two port sizes available, 3/8 in. NPT or -6 AN inlet/outlet and return (where applicable) * Fitting for manifold reference * 1/8 in. NPT gauge port * Boost reference--1:1
( 161 )
$272.95
$134.95
—
$245.65
On Sale
Holley in-tank retrofit fuel modules are the easiest way to convert your vehicle's factory tank or fuel cell to an in-tank, EFI fuel system—and gain all the benefits of a Holley Hydramat reservoir, as well. This conversion requires only basic tools, no welding or fabrication. The low-profile, aluminum module design includes a billet pump hanger bracket to control vibration; Holley's innovative clamping system and integrated fuel pump allow you to locate the module anywhere in the tank beside your existing sending unit. Once installed, simply hook up your fuel lines and your power source/ground, and you're ready to roll. Holley in-tank retrofit modules are available with fuel pumps for both return and returnless-style systems—and models to support various liters per hour (LPH). Additional details: * Installs in any fuel tank to fit a wide range of applications * The low-profile design is only 1.275 in. thick above the tank mounting surface for added clearance * Clamping system allows you to rotate the unit 360 degrees for easier clocking of plumbing and wiring * Hydramat fuel reservoir's 3 x 15 in. mounting flange has six clocking pin locations for 360 degree adjustment * Black anodized aluminum construction to resist corrosion * 1/4 in. NPT ports available for numerous plumbing options * Ideal for Terminator EFI, Sniper EFI, MSD Atomic EFI, or any TBI or EFI conversion * Optional rollover valve available
( 9 )
$799.95
—
$999.95
$718.95
—
$898.95
On Sale
By popular demand, Holley is expanding the draw-thru supercharger carburetor line to now include the 4150 XP Series. Like the existing HP line, these carbs are available in 600, 750, and 950 cfm flow rates—and standard polished with black accents. The feature-laden XPs include a contoured venturi inlet for balanced airflow, screw-in air bleeds for precision-tuning capabilities, high-flow billet metering blocks, billet base plate, and Dominator-style fuel bowls which allow plumbing from either side. Supercharger XP carburetors also have a unique capability that allows their power valves to reference the intake manifold vacuum below the supercharger. This enables the power valve to operate as it should, based off intake manifold vacuum. A power valve provides further enrichment to the main metering system under load (low vacuum) conditions. Holley XP carburetors are the standard for square bore race carburetors. Race-Ready out of the box! Order the model with options preferred for your vehicle. Product details: * Tumble polished shiny finish for good looks * Application-specific blower calibration * Contoured venturi inlet offers balanced airflow for increased horsepower * Screw-in air bleeds for precision-tuning capabilities * Dual accelerator pumps for additional fuel under initial acceleration * Dual feed fuel inlets for constant high-volume fuel delivery * 4-corner idle allows you to precisely control your idle system * Mechanical secondaries for perfect off-the-line launches * Boost referenced power valve for proper enrichment under acceleration * Throttle lever cut off for clearance on a sideways application * 100 percent wet-flow tested by Holley technicians to assure it arrives ready to run
( 2 )
$1,099.95
—
$1,299.95
$988.95
—
$1,168.95
On Sale
Holley EFI GM-style fuel filters have a built-in regulator to provide a simple and clean means to fueling your LS swap. Available with OEM-style or -6AN connections, they feature an internal regulator set at 58 psi, along with an integrated 5 nominal micron rated filter. The bypass design allows you to run one inlet with one outlet to the engine, and a return outlet back to the tank. Holley EFI fuel filter regulators are ideal when performing a LS engine swap or any other fuel injection swap that is designed to run at 58 psi of static pressure. Choose the fuel filter/regulator with the proper connections for your vehicle. Features: * All stainless-steel construction for improved corrosion resistance * Designed with one inlet, one outlet, and one return * Fixed pressure at 58 psi * Nominal micron rating: 5 * Can be used with other EFI systems that require 58 psi * Not recommended with fuel pumps that flow over 450 lph * Return line required for proper regulator operation
( 9 )
$53.25
—
$77.15
$47.95
—
$69.45
On Sale
One of the most popular updates for an older vehicle is swapping out the carburetor for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and often difficult to mount properly. Holley Sniper EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They're a direct-fit for a wide variety of specific applications, require no modifications, and include either a 255 lph or 400 lph submersible pump, a fuel level sender, and internal baffles. For the fuel you need with in-tank quietness, order a Holley Sniper EFI conversion fuel tank. Features include: * 255 lph model supports up to 550 hp * 400 lph model supports up to 750 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Sending units have the correct ohm range for factory gauges * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Fits and looks like an OE tank when installed * Include new tank straps, where applicable
( 109 )
$1,049.95
$584.95
—
$1,049.95
On Sale
Holley aluminum Street Avenger 4-barrel carbs give you trouble-free performance in a good-looking, easy-to-install package. The attractive aluminum finish not only gives a long lasting shine but also offers weight savings as well. They're calibrated to give you the performance you need, without the tuning headaches involved with other carbs. Features include a tunable metering system, fuel filters in the primary and secondary fuel bowls, center-hung floats, external float adjustment, choice of electric or manual choke, emissions accessory ports, adjustable secondaries, a power-valve saver, dual-feed conversion fuel line, and more. Street Avenger Carburetors also feature a four corner idle system that allows for superior idle control by utilizing primary and secondary idle adjustments, increased idle control on engines with higher performance cam shafts, and vastly improves throttle response. All of this comes with a polished finish that looks as good as it performs! They're available in many different sizes for a variety of engines.
( 36 )
$699.95
—
$719.95
$628.95
—
$646.95
On Sale
You will not find an easier way to upgrade your fuel system than the Holley Sniper OE Style 350 LPH EFI Fuel Pump Modules. They are a direct replacement that fits your factory fuel tank, so you don't have to guess when it comes to something as important to your project as the fuel system. Because it was designed as a direct replacement for your factory pick-up and sending unit, there is no need to purchase a custom EFI fuel tank. You can even retain your factory fuel line. Simply connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earl's Vapor Guard Line. Features: * The in-tank fuel pump module is a high-pressure unit that flows 350 liters per hour (LPH) and is capable of supporting EFI (electronic fuel injection) engines producing up to 750 horsepower * Includes a pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for your application * Solves all the usual issues of converting from carburetor to EFI
( 28 )
$649.95
$305.95
—
$649.95
On Sale
Holley Sniper EFI fuel tank systems will complete your EFI swap. They fit and look like an OE tank, but each Sniper tank is a direct-fit for your application, which means no modifications for you to perform. The tanks are powdercoated galvanized steel for corrosion resistance and lasting good looks. Your Holley Sniper EFI fuel tank kit will include the tank, fuel pump, fuel level sender, and internal baffling. Some kits may also include filler neck and tank straps. Sniper EFI tanks feature: * Fuel pump (255 lph) with hanger assembly gives you the fuel you need with in-tank quietness * Sender has 1/4 in. NPT supply and return line ports for easy connection and a barbed vent fitting * Fuel level sender has the correct ohm range for your factory gauges * Fuel pump and sender are recessed in the tank to provide an easy installation * EFI-style tank baffling includes a large 4.3L internal fuel tray to prevent fuel pump starvation
( 23 )
$999.95
$673.95
—
$1,049.95
On Sale
When converting your fuel system to a return-style EFI setup, the biggest challenge can be plumbing the fuel lines. Holley has found a way to make this job easier! They offer EFI filter regulator assemblies to simplify your installation—by combining the fuel filter and regulator in one unit that can be mounted in the rear of the vehicle. Mounting in the rear means less line to run for a return and less mess. These regulators feature a 175 gph, 10 micron fuel filter built-in. The regulators are preset at 59.5 psi. They're available with 3/8 in. NPT or -8 AN port sizes to match most common EFI fuel systems. Simplify your EFI conversion, or clean up the plumbing on your current EFI system, by installing a Holley EFI filter regulator. (Diecast EFI fuel regulators are also available by Holley.)
( 23 )
$182.95
—
$232.95
$164.65
—
$209.65
On Sale
Holley Sportsman Model 4500 Dominator carburetors feature the patent pending new Holley Gen 3 main body, which is 5/16 in. taller than the previous generation! This new height allows for larger radius air entries to deliver smoother flow—which equates to improved throttle response and consistency. An extended air cleaner flange is incorporated for easy air scoop attachment when using the available air scoop adapter. Other features include all-aluminum construction, tunable billet metering blocks, throttle position sensor mounting points, and knurled (hand adjustable) curb idle screws. Each calibration has been dyno and track tested to deliver proven performance! Key features of the Holley Sportsman Model 4500 Dominator carburetor: * All-aluminum construction saves 3.8 lbs. over original models * Shiny with billet aluminum metering block and black hardware * Designed for use on Drag racers, Pro Street, or any high-horsepower engines * Calibrations optimized for today's race engines and new fuels * Fully machined from venturi throat to throttle bore for predictable and repeatable performance * Annular boosters deliver excellent signal and throttle response * Screw-in air bleeds offer precise tuning capabilities * Metering blocks feature improved durability, true gasket sealing, and adjustability (power valve channel restrictors, intermediate restrictors, and idle feed restrictors) * Dual 50cc accelerator pumps provide the perfect amount of fuel from idle to full throttle * 4-corner idle allows you to precisely control your idle system * Clear sight windows on fuel inlet side of bowls for easy and safe fuel level adjustments * Notched float and jet extension are installed * 5/8-18 in. inlet threads offer a large variety of plumbing options (uses standard 4500 fuel inlet spacing) * Factory-ready TPS mounting points for use with data acquisition systems * Knurled primary and secondary curb idle screws allow for easy idle adjustment without the use of tools * Contoured hex head squirter screws for streamlined airflow * Progressive secondary link installed for perfect off-the-line launches; no linkage parts under the carburetor (1:1 wire link included in kit) * 100 percent wet-flow tested by Holley technicians to assure carb arrives ready to run * Compatible with the Gen 3 Dominator 4-hole billet spacer
( 10 )
$1,249.95
—
$1,299.95
$1,123.95
—
$1,168.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
