Availability
On Sale
One of the most popular updates for an older vehicle is swapping out the carburetor for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and often difficult to mount properly. Holley Sniper EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They're a direct-fit for a wide variety of specific applications, require no modifications, and include either a 255 lph or 400 lph submersible pump, a fuel level sender, and internal baffles. For the fuel you need with in-tank quietness, order a Holley Sniper EFI conversion fuel tank. Features include: * 255 lph model supports up to 550 hp * 400 lph model supports up to 750 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Sending units have the correct ohm range for factory gauges * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Fits and looks like an OE tank when installed * Include new tank straps, where applicable
( 109 )
$899.95
—
$949.95
$808.95
—
$853.95
On Sale
Holley Sniper stock replacement fuel tanks are designed to meet or exceed the quality of your factory original. Whether you have a track or street car, or a car you're restoring, Sniper has the high-quality fuel tanks you're looking for. Start your fuel system project fresh with a Holley Sniper stock replacement fuel tank—order the model designed for your application. Features include: The steel fuel tanks have a powder coated finish for corrosion protection and good looks. Stock replacement fuel tanks are made to oem specifications for a great fit for your ride. They are a perfect companion when using our Holley Musclecar EFI modules or our Retrofit EFI Pump modules. Tank sending unit lock ring is included Tank straps are not included
( 63 )
$226.95
On Sale
When converting your fuel system to a return-style EFI setup, the biggest challenge can be plumbing the fuel lines. Holley has found a way to make this job easier! They offer EFI filter regulator assemblies to simplify your installation—by combining the fuel filter and regulator in one unit that can be mounted in the rear of the vehicle. Mounting in the rear means less line to run for a return and less mess. These regulators feature a 175 gph, 10 micron fuel filter built-in. The regulators are preset at 59.5 psi. They're available with 3/8 in. NPT or -8 AN port sizes to match most common EFI fuel systems. Simplify your EFI conversion, or clean up the plumbing on your current EFI system, by installing a Holley EFI filter regulator. (Diecast EFI fuel regulators are also available by Holley.)
( 23 )
$182.95
—
$232.95
$164.65
—
$209.65
On Sale
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 357 )
$236.95
$213.25
On Sale
Holley EFI Hi-Flow billet fuel rails offer flow capacity for high horsepower applications and billet aluminum construction that is machined and black anodized for great style under the hood. Laser-etched with the "Holley EFI" logo, the fuel rails feature a 5/8 in. diameter fuel passage, -8 ORB ports on each end, and an 1/8 in. NPT port for a fuel gauge installation if you choose to do so. Holley EFI Hi-Flow billet fuel rails are designed with the factory injector clip reliefs so that your factory injectors and retaining clips can be reused. This is important as the clips locate the injector radially for proper injector spray pattern onto valves. The kits include fuel rails, mounting brackets, and required mounting hardware.
( 3 )
$249.95
On Sale
Holley Sniper offers OE-style 255 lph EFI fuel pump modules for a wide range of vehicles, including many Chevy, Pontiac, Buick, Oldsmobile, GMC, Ford, Mercury, Jeep, Dodge and Plymouth cars and trucks from the 1950s, '60s, '70s, and '80s. These in-tank modules are high-pressure units that flow 255 liters per hour (LPH) and are capable of supporting electronic fuel injection (EFI) engines producing up to 550 hp. A pre-calibrated fuel level sending unit designed to work with the factory fuel gauge for this application is included. Each module also features a HydraMat filter which has a unique internal reservoir that keeps fuel available at the pick-up and also provides protection from contaminates. Fuel pressure is internally regulated to 58 psi, eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator; no separate return line is required because these modules return excess fuel right inside the tank! The Holley Sniper EFI fuel pump module was designed as a direct replacement for your factory pick-up and sending unit. There's no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line—just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line.
( 10 )
$449.95
$403.95
On Sale
You will not find an easier way to upgrade your fuel system than the Holley Sniper OE Style 350 LPH EFI Fuel Pump Modules. They are a direct replacement that fits your factory fuel tank, so you don't have to guess when it comes to something as important to your project as the fuel system. Because it was designed as a direct replacement for your factory pick-up and sending unit, there is no need to purchase a custom EFI fuel tank. You can even retain your factory fuel line. Simply connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earl's Vapor Guard Line. Features: * The in-tank fuel pump module is a high-pressure unit that flows 350 liters per hour (LPH) and is capable of supporting EFI (electronic fuel injection) engines producing up to 750 horsepower * Includes a pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for your application * Solves all the usual issues of converting from carburetor to EFI
( 28 )
$580.95
$377.95
On Sale
Holley drive-by-wire throttle body wiring harnesses are designed for use with the Holley Dominator ECU, as well as the factory drive-by-wire throttle body. These harnesses feature pre-terminated connections, ensuring true plug-n-play installation.
Not Yet Reviewed
$249.95
On Sale
The heart of a fuel system begins with the fuel tank. Secure your tank in place with Holley Sniper fuel tank straps. Available in many styles and shapes to fit a variety of applications, they are made from steel and galvanized for corrosion protection and continued good looks. Holley Sniper fuel tank straps provide a simple and inexpensive solution to alleviate fuel tank issues.
Not Yet Reviewed
$45.94
On Sale
Holley Sniper in-tank fuel pump modules are direct-fit units to drop directly into the specific vehicle application. Two modules--the Sniper 340 lph and Holley 525 lph--feature a 6061 T-6 flange that has a bright dip black anodized finish for corrosion protection and long-lasting good looks. The flanges have a 6AN O-ring outlet and return port making the plumbing connections easy. The assembled modules include a new filter sock and the lock ring to complete the installation into your stock fuel tank. Choose the module designed for your vehicle. Notes: * Includes a pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for the specific application * 340 lph module supports up to 700 EFI or 900 hp carbureted * 525 lph module supports up to 1,200 EFI or 1,450 hp carbureted * Both EFI and carbureted systems will need a bypass design regulator
Not Yet Reviewed
$519.95
$466.95
On Sale
Holley air cleaner assemblies prevent debris from entering your air intake system—and look fantastic beneath your hood! These economical units are available in 2, 3, and 4-barrel fitments, as well as a variety of heights, shapes, diameters, materials, and finishes. The cleaners utilize an open element design, with a paper or washable cotton gauze filter included. Steel components are offered in a chrome plated or black powdercoat finish. Enhance your vehicle's airflow with a stylish Holley air cleaner assembly.
( 68 )
$131.95
—
$171.95
$118.75
—
$154.75
On Sale
Featuring typical Holley quality, model 2300 marine carburetors include special modifications that make them adaptable and legal for marine use. Primary differences include J-style fuel bowl vent tubes and sealed throttle shafts. In addition, these 2-barrel carbs were designed to meet flooding and backfire requirements set by the U.S. Coast Guard. Other features include an electric choke, 30cc accelerator pumps, single fuel inlets, and a 5 in. airhorn.
Not Yet Reviewed
$682.95
$613.95
On Sale
Holley billet EFI return-style fuel pressure regulators are space saving options when mounting on the end of the fuel rail or near the throttle body. They are preset at 59.5 psi, and the cap can be removed and re-oriented to suit the desired fuel routing. These Holley EFI fuel pressure regulators feature 6061 T-6 billet aluminum construction, and are machined for all SAE6 ports with three -6 AN fittings included, plus an extra plug to replace one fitting when installed post throttle body/fuel rail. They are compatible with Holley Sniper or Sniper Stealth among other applications, and available with either an all-black or a black/clear anodized finish.
( 6 )
$249.95
$224.95
On Sale
Holley EFI universal bypass fuel pressure regulators are for use with fuel systems in street or track applications. They feature adjustable base pressure from 15-90 psi, a gauge port, and a boost reference port, as well. The regulators are ideal for vehicles/systems where superior flow and pressure control are desired. These regulators are precision-machined from 6061-T6 billet aluminum for strength and durability—and feature a black bright dip anodized body and a clear bright dip anodized top for corrosion resistance and good looks. Choose from models with -6 AN or -8 AN inlet/outlet port sizes. * Kits include a Holley fuel pressure gauge * Regulator features an 1/8 in. NPT gauge port and 1/8 in. NPT boost reference port (barbed fitting included) * Mounting bracket and fittings included
Not Yet Reviewed
$227.95
—
$236.95
$205.15
—
$213.25
On Sale
Holley EFI fuel pulse dampers act in tandem with the fuel pressure regulator to further control the fuel pressure in an EFI system. They act to smooth out the pressure pulsations caused by the injectors opening and closing as well as the fuel pump operating. These pulsations happen so quickly that in many cases they can't be identified with an analog gauge but can cause issues with fuel delivery to the engine. Options include: * Direct-mount or inline mount * Multiple inlet/outlet dimensions * Standard or extended fuel pressure range * Male or female threads Features: * Engineered to stabilize pressure pulsations caused by the injectors opening; ideal for applications with large fuel injectors and high-volume fuel pumps * Compatible with any fuel; full anodized billet aluminum construction with stainless steel springs and fluorosilicone diaphragm * Fittings included for damper/regulators and direct-mount dampers * 1/8 in. NPT port on body of damper/regulators and inline dampers for easy installation of mechanical pressure gauge or pressure transducer * Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
( 6 )
$106.95
$96.25
—
$154.95
On Sale
Holley electric choke conversion kits can be used to convert Holley carburetors originally equipped with either a hot air or hand-operated choke into a fully automatic operation.
( 9 )
$105.95
On Sale
These machined aluminum EFI fuel rails are capable of handling 1,100+ hp engines. They feature a large inner diameter bore to decrease fuel pressure drop and help cancel out back pulses.
( 54 )
$149.95
On Sale
Holley aluminum fuel cells come in a several variations for nearly every race application, and they also offer mounting straps to keep them secure. Holley fuel cell mounting straps are available for 5-, 10-, 15- and 20-gallon fuel cells. They are constructed from 1/8 in. thick mild steel and finished with a black e-coat finish to prevent corrosion. Holley includes EPDM rubber strip isolators for added protection and mounting hardware to complete the installation. Choose the straps to fit your fuel cell.
Not Yet Reviewed
$65.39
$35.96
—
$65.39
Holley LS Series fuel rail brackets and fasteners are the correct replacements for GM LS Series Lo-Ram manifolds. The brackets feature robust aluminum construction and a durable black finish.
Not Yet Reviewed
$54.89
Holley EFI Pro Stock throttle bodies feature billet aluminum construction and are designed to fit Visner Engine Development's oval mounting flange. They have a massive 25 sq. in., 7 in. x 4.5 in. oval throttle opening with a fully adjustable, 6-position throttle lever mount, and include a non-contact magnetic hall effect TPS sensor.
Not Yet Reviewed
$1,349.95
Holley ARCA Racing Series HydraMat fuel reservoir systems have fitting locations designed for Road Course or Circle Track use, and they are spec parts for the ARCA Racing Series. During hard cornering, acceleration, stopping, inclines, and low fuel conditions, fuel runs away from the fuel pick-up, introducing air into the system, resulting in poor engine performance, and even stalling. Holley's amazing HydraMat fuel systems are the solution! The mats have surface tension and fluid wicking capabilities, giving them the amazing ability to draw from nearly any area that has contact with fuel and then store it in their internal reservoirs. The sheer size and coverage area of these HydraMats allow them to pull fuel from virtually any area in the tank or cell, eliminating the need for specialty reservoirs and pick-up pumps, saving cost, and greatly reducing complexity. Features and benefits: * As an area of the HydraMat is uncovered, tiny pores in the media seal off through surface tension, forcing fuel to be drawn from other areas of the mat where fuel continues to be available * Unique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions * Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump * Can be folded and compressed for easy installation through a variety of fuel cell openings * Works with Alcohol, Ethanol, Methanol, and E-85 fuels * Works with 2-cycle oil blends as high as 20:1 Please note: Not for use with diesel fuels and most oils
Not Yet Reviewed
$1,149.95
On Sale
Holley Hi-Ram intake manifold plenum tops are constructed of cast aluminum and offered in different finishes to match the bases. They are available in dual 4150 or 4500 pattern, or in a full blank top so that you can design your system. Choose the ideal plenum for your Hi-Ram manifold.
Not Yet Reviewed
$318.95
$175.95
—
$266.95
Many in-tank EFI fuel pumps come with a 19mm intake port size. Holley filter socks are much larger than most factory fuel socks allowing for more surface contact area submerged in the fuel. Features: * 19mm cup attachment design * 6 in. x 2.5 in. size filter sock
Not Yet Reviewed
$22.41
On Sale
Holley offers intake manifold hardware kits for a variety of Chevrolet engine applications from 1997 and up. The installation hardware is available in a silver or black finish.
Not Yet Reviewed
$54.39
$29.91
—
$93.89
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
