Availability
Offering a 200 hp increase at the tires over stock, Edelbrock Twin-Force State 3 Turbo Systems will unleash the max potential of your truck. Edelbrock's engineers collaborated with Garrett on the design of all new turbos for the 3.5L EcoBoost trucks. These new direct bolt-in turbos incorporate the latest in turbocharger technology, offering a 54 percent increase in airflow over the factory turbos. A 60mm billet compressor wheel produces great improvements in compressor efficiency and flow. The 50mm Inconnel turbine wheel and larger .45 A/R stainless steel turbine housing result in a 52 percent increase in turbine flow. The 2.75 in. compressor inlets are 38 percent larger than the factory turbos, complementing Edelbrock's high-flow turbo inlet piping. The new turbochargers—combined with Edelbrock's larger intercooler, air inlet tubes, and high-flow air filter—offer huge increases in power potential for this application. To complement the improvements in airflow, the Stage 3 kits include an electronic booster for the fuel pump, enhancing fuel delivery and unlocking even more power potential. A flashing device (tuner) is included for flashing the Edelbrock Stage 3 calibration into the trucks PCM. The included calibration is specifically engineered for the components included in these kits—and takes advantage of this increased power potential, while keeping this upgrade to your truck EPA legal. Product notes: * New turbos with the latest turbocharger technology * Bolt-in installation with no fabrication required * EPA legal calibration and tuner (requires a PC) * OEM quality fit and finish * 200 hp gain at the wheels over stock
Not Yet Reviewed
$7,122.95
Edelbrock offers Twin-Force Stage 2 Turbo System for a variety of applications—with or without a tuner included. Are you ready for the next level of performance? These systems include all of the great components of the State 1 Power Package, PLUS a pair of turbos incorporating the latest turbocharger technology from Garrett. * Model 158332 includes a tuner with the Stage 2 calibration—and offers a 150 RWHP gain over stock * Model 158330 does not include a tuner, which allows the installer to use an existing tuner to flash the appropriate calibration into multiple vehicles.
Not Yet Reviewed
$5,731.95
—
$6,502.95
Edelbrock Twin-Force Stage 1-2 Turbo System Upgrade Kits will upgrade your Edelbrock Twin-Force Stage 1 Power Package to a Stage 2 Turbo System by adding driver and passenger turbochargers. Edelbrock's engineers collaborated with Garrett on the design of all new turbos for the 3.5L EcoBoost trucks. These new direct bolt-in turbos incorporate the latest in turbocharger technology, offering a 54 percent increase in airflow over the factory turbos. A 60mm billet compressor wheel produces great improvements in compressor efficiency and flow. The 50mm Inconel turbine wheel and larger .45 A/R stainless steel turbine housing result in a 52 percent increase in turbine flow. The 2.75 in. compressor inlets are 38 percent larger than the factory turbos, complementing Edelbrock's high-flow turbo inlet piping. When combined with Edelbrock's larger Intercooler, air inlet tubes, and high- flow air filter, these turbochargers offer huge increases in power potential for this application.
Not Yet Reviewed
$4,523.95
Go retro with Edelbrock Performer RPM LS1 intake manifold kits. These kits give you the opportunity to use a carburetor on your originally computer-controlled engines. Performer RPM LS1 kits include a wiring harness and an MSD ignition controller (compatible with 24x and 58x) which works with OE sensors to fire the coil-on-plug ignition system and offers a choice of six timing curves. A special throttle and transmission bracket that works with 700R-4, 200R-4 and Turbo 350 transmissions is included. Make your LS1 engine an easy retro-fit into any muscle car, street rod or marine application with American-made Edelbrock Performer RPM LS1 intake manifold kits.
( 10 )
$1,027.95
Edelbrock single and dual regulator kits are designed for use with Holley square bore or 4500 Dominator series dual-feed carburetors on alcohol, turbo, and supercharged gasoline engines. They'll allow you to adjust fuel pressure from 4 1/2 to 9 psi, and are recommended for use with either Edelbrock racing fuel pumps or any high-output fuel pumps. The kits include fittings, a mounting plate, fuel line, and single or dual regulators.
( 2 )
$224.95
This Edelbrock Victor Jr. LS1 EFI Intake Manifolds are a high-rise single plane design capable of supporting up to 600 hp. Like the Edelbrock Performer RPM LS1 intakes, these Victor Jr. LS1 EFI manifolds accept a standard flange throttle body. These manifolds also include a throttle bracket designed to work with 700R-4, 200R-4 and Turbo 350 transmissions. Most applications will require hood modification.
( 2 )
$509.95
—
$638.95
Edelbrock throttle cable brackets are just what you need to hook up your cables the right way.
( 181 )
$20.95
—
$83.95
These Edelbrock throttle lever studs are designed to hook cables up to your carburetor. They come in a variety of styles for throttle cables, cruise control cables, and transmission kickdown cables.
( 49 )
$13.95
These Edelbrock in-tank electric fuel pumps are designed to support performance upgrades to the intake manifold, camshafts, direct port nitrous systems, bigger throttle bodies, and more. They include all necessary mounting hardware and require no modifications to your vehicle.
( 6 )
$200.95
Edelbrock's high-volume in-tank fuel pumps will meet the increased fuel demands of modified 1986-97 EFI Mustangs. Unlike stock pumps, which flow 88-95 lph, our pumps are available in 155, 190, and 255 lph versions to help your modified engine meet its power potential. Our pumps also feature an OEM-style design and are direct-fit replacements.
( 8 )
$245.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
