Availability
AED has combined every possible add-on feature and incorporated it into each of these Ultimate Performance carburetor kits to give you longer-lasting and improved performance from your Holley carburetor. Most of the features that you would buy separately are already included. Features include: * High-flow needle and seats * Nylon reusable needle and seat gaskets * Nylon reusable bowl screw gaskets * New brass idle mixture screws * New needle and seat nuts and screws * New accelerator pump squirter check valves * Special no-leak fuel inlet gaskets * Non-stick bowl and metering gaskets
( 86 )
$46.99
—
$98.99
AED Billet HO-Series carburetors are designed for single 4-barrel normally aspirated engines with the Pro-Street and bracket racer in mind. They feature a clean idle, crisp throttle response, and killer acceleration. These carbs are available in different double-pumper sizes and have been run, adjusted, and tuned on a test engine before shipment to ensure the utmost quality. Get the performance you want for the street and track when you order the AED Billet HO-Series carburetors best suited for your build.
( 20 )
$664.95
—
$739.95
Designed with street and bracket racers in mind, AED HO-Series carburetors offer crisp throttle response, great drivability, and killer acceleration. These carbs feature CNC-machined and deburred main body surfaces, high-flow boosters and metering blocks, four corner idle, a milled choke horn, dual accelerator pumps and vacuum ports, and non-stick, reusable gaskets. All AED carburetors are tested and tuned before shipping, employing their state-of-the-art, planet-leading, computerized "wet-flow bench." They'll provide you with properly matched and balanced fuel delivery and a controlled metering signal and strength, no matter what your speed. HO-Series carburetors are available for aspirated engines, alcohol, blower, and marine applications. AED HO-Series carburetors unite "off-the-shelf" high performance with an affordable price.
( 69 )
$729.95
—
$974.95
AED HB-Series blower carburetors are designed specifically for roots-style blower applications. They feature billet metering blocks, boost referenced power valves, wet flow technology, fully machined conventional main bodies for additional signal strength and response providing exceptional acceleration. All AED HB-Series blower carburetors are blueprinted and tested for maximum performance right out of the box.
( 5 )
$744.95
—
$799.95
AED carburetor kits include all of the necessary components to successfully rebuild and restore your Carter 9000 series and Edelbrock Performer series carburetors to their original condition. AED makes the rebuilding process easy and convenient by including all of the gaskets, needle and seats, clips and accessories, an accelerator pump, and instructions in one complete kit. Now you can buy one kit to service either of these fine carburetors. In many cases, float replacement is required to achieve maximum performance.
( 42 )
$64.99
AED Pro Tunnel Ram linkage kits are absolute musts for the unruffled operation of sideways mounted carburetors. These linkage kits are built with aircraft-quality components, including left and right hand Heim joints for precise metering with virtually no flex for reducing pedal pressure or eliminating over-center issues. AED Pro Tunnel Ram kits include instructions for a no-guess install and their universal fit will work with most carburetor and manifold applications.
( 12 )
$144.99
—
$199.99
AED manufactures a complete line of billet CNC metering blocks in-house to provide the ultimate in fuel curve tuning and adjustability. They offer standard billet blocks with fixed-orifice sizing (idle fuel and power valve restriction channels are adjustable) for all emulsion circuits. Versions for gas, alcohol, and E85 setups are available. Get a knockout baseline tune-up right out of the box with the AED billet metering blocks best suited for your application!
( 10 )
$89.99
—
$127.99
AED billet throttle linkage and spring brackets shine with cool, customized looks and perfect performance under your hood. These combination linkage and spring brackets offer CNC-machined billet aluminum linkage plates in four anodized finishes. They not only provide you with strength and durability, but they also allow you to customize and enhance your engine compartment. AED billet throttle linkage and spring brackets are designed for Holley and AED carburetors, include all hardware (no additional parts are needed), and pass spring retention requirements for all sanctioning bodies. Impressive looks and superb performance at a small price--that's the AED advantage.
( 85 )
$74.99
—
$89.99
When you want to fully restore your AED or Holley Carburetor to its original look and quality, these AED Pro-Series carburetor kits are the answer. They include all of the great components of AED's famous Ultimate Performance carburetor kits, plus the additional hardware that corrodes, wears out, and plain just looks miserable over time. The kits also include a new non-stick bowl and metering gaskets. Additional features include: * New bowl screw and pump nozzle screws * New pump cover and throttle plate screws * Needle and seat nuts and screws * Base plate screws and idle mixture screws * Idle speed position screw and idle speed spring * Sight plug screws and secondary connecting link * Miscellaneous clips, pins, and hardware
( 8 )
$66.99
—
$94.99
AED offers a complete selection of accelerator pump cam kits with varying opening rates and delivery volumes. They allow you to fine tune your accelerator pump requirements to your engine performance needs.
( 16 )
$25.79
AED offers these needle and seat assemblies for alcohol applications. These stainless steel needle and seats provide the ultimate in fuel capacity and seating ability when optimum fuel flow is required. All assemblies come complete with AED's special reusable needle and seat gaskets.
( 5 )
$11.99
—
$16.99
AED traditional needle and seats are designed for applications that are up to 650 hp on gas. These assemblies come complete with special reusable needle and seat gaskets.
( 11 )
$14.99
Since proper power valve selection is crucial to carburetor tuning, AED offers these high-quality power valves specifically designed for your Holley performance carburetor. All AED power valves are high-flow units with several vacuum ratings to give you the ultimate in tuning capability. AED also offers alcohol power valves for the special fuel demands of alcohol carburetors.
( 13 )
$9.99
—
$11.99
AED Hi-Flow carburetor needle and seat assemblies are must-haves for any HP application. They help you maintain that constant fuel level that is so important for consistency and low ETs—making them ideal for drag racing, superchargers, and blow-through applications. Get that AED performance edge with the AED Hi-Flow needle and seat assemblies best suited for your application.
( 1 )
$14.99
When it's time to replace worn-out and corroded components on your carburetor, AED replacement hardware kits have all of the hard-to-find items that you need to get the job completed. These pieces are perfect for renewing your Holley or AED performance carburetor. AED replacement hardware kits include the pieces listed below, plus miscellaneous clips, pins, and hardware: * Bowl and pump nozzle screws * Pump cover and throttle plate screws * Base plate and idle mixture screws * Needle and seat nuts and screws * Idle speed position screw and spring * Sight plug screws and secondary connecting link
( 7 )
$35.79
AED billet Edelbrock linkage brackets shine with cool, customized looks and perfect performance under your hood. These combination linkage and spring brackets offer CNC-machined billet aluminum linkage plates in two anodized finishes. They not only provide you with strength and durability, but they also allow you to customize and enhance your engine compartment. AED billet Edelbrock linkage brackets are designed for Edelbrock and Carter AFB carburetors with all hardware included--no additional parts are needed. Impressive looks and superb performance at a small price--that's the AED advantage.
( 13 )
$74.99
—
$90.99
Improve performance with AED jet extensions. Virtually all single carbureted drag cars need rear jet extensions. During acceleration and high g-forces, fuel is pushed to the rear-most portion of the float bowl, uncovering the jets and creating a lean condition, which reduces performance. AED's bored stainless steel extensions have a special half-moon shape that ensures plenty of fuel volume and clears the stock floats.
( 7 )
$40.79
AED bowl vent baffles install in the top of a Holley metering block to prevent fuel slosh out of the vent tubes during hard acceleration, cornering, and braking. They're a must for performance carburetors.
( 4 )
$7.99
AED Pro-Series billet carburetor base plates are CNC-machined from 6061 alloy to strict tolerances for an exact fit and then anodized for durability and good looks. These Pro-Series carburetor base plates are available with or without vacuum ports, offering added performance, and feature machined shafts, thinned throttle plates, and high-flow screws. These Pro-Series billet carburetor components are a must for severe duty and come with the AED advantage--quality and price!
Not Yet Reviewed
$174.99
—
$214.99
Vacuum secondary carburetors are designed for universal installation on varying engine sizes and power levels. In turn, great improvements can be made by tailoring the secondary opening rate to your specific engine combo. These AED vacuum secondary spring tuning kits are designed to upgrade and fine-tune your vacuum secondary carburetor, resulting in overall better engine performance.
( 2 )
$17.99
If you rebuild your carb, then you should replace your old accelerator pump. AED accelerator pump assemblies will keep your carb working to its full performance capabilities.
( 1 )
$12.99
To have your carburetor perform to its utmost potential, the combination of airflow and fuel metering must be proportionally correct throughout the entire rpm range. AED drop-leg carburetor boosters are more responsive when you're running a large carburetor in narrower power band situations. Since your carburetor booster combination is unique to your engine size, track size, and conditions, plus numerous other factors, AED offers several options to best suit your particular needs. AED drop leg carburetor boosters are available in sets of four and require an AED booster tool to install.
( 3 )
$19.99
You'll notice a definite difference in power with AED Marine Series carburetors. They're hand-built and calibrated for marine use to specifications for a balanced fuel curve. Featuring AED custom billet marine metering blocks, the carbs are test-run and blueprinted for maximum performance, right out of the box. You'll like the improved throttle response and crisp revs. If you're picky about how your boat runs (and looks), go with AED HO-Series.
Not Yet Reviewed
$689.95
—
$759.95
For the quick fine-tuning of your power valve channel, AED offers these power valve restrictor kits. They offer precise, custom circuit enrichment and timing. These restrictor kits include a drill bit, tap, Allen wrench, and eight blank restrictors to improve your carburetor's performance.
( 1 )
$50.79
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
