Free Shipping on Orders Over $125 at Summit Racing

Zumbrota Remanufactured Transfer Cases

Zumbrota remanufactured transfer cases are put through a proprietary cleaning method, and arrive looking like new. But before they ship, each unit goes through complete inspection, component replacement, and quality control process to assure dependable, reliable shift-ability. Zumbrota rebuilds units from New Process, Borg Warner, and other major manufacturers to fill fitments for foreign and domestic passenger cars, trucks, and SUVs. Benefits of Zumbrota remanufactured transfer cases include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All cases are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent replacement of seals, bearings, viscous couplers (when applicable), and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty

3.86 out of 5 stars ( 7 )

$1,075.99

—

$3,852.89

Dorman Remanufactured Powertrain Control Modules

Dorman's remanufactured powertrain control modules offer original equipment performance for less than the cost of a new ECM from the dealer. The engine control module processes inputs from various sensors to control the engine's ignition and fueling for optimum performance and efficiency. Each ECM is quality-remanufactured and has been fully tested to ensure durability and functionality, including hot and cold chamber testing to meet original equipment performance. Order the module for your application.

4.25 out of 5 stars ( 4 )

$156.99

—

$2,010.99

Ranger DST2420 Wheel Balancers

Ranger DST2420 wheel balancers are highly accurate and dependable, featuring proprietary digital sensor technology for critical reliability and repeatability. They're built with a gritty toughness that guarantees perfectly balanced wheels day after day, around the clock. Like all of the DST Series wheel balancers, these units feature a proven direct-axis drive system--accurate to within hundredths of an ounce, ensuring that your wheels are balanced and vibration-free. The Ranger DST2420 balancers automatically calculate the exact weight needed to achieve optimal balance for almost every tire and wheel configuration on the planet; and brightly displayed LEDs mark the exact amount and location in just six seconds. A full menu of time-saving features--including dynamic, static, and performance alloy settings--allows you to balance OEM wheel configurations and performance wheels with minimal effort and speed.

5.0 out of 5 stars ( 1 )

$3,295.00

On Sale

Holley EFI Terminator X Active Speed Management Software

Getting a high-powered drag car to hook is the key to low elapsed times and win lights. Whether a small tire radial car or a full out Pro-Mod, all racecars will benefit from Holley's Time-Based Traction Management feature. Designed for Terminator X V3 Build 110 and later, the Time-Based Traction Management is intended for drag racing, standing mile events, or other racing that starts from a stop. Traction management is based on the time from launch vs. engine and driveshaft speed (one or both can be used). The tuner enters several curves that will retard ignition timing and can also enable rev limiting based on the departure of wheel or engine speed from the base curve. Each Holley EFI Terminator X Active Speed management software purchase allows activation of the traction management features for a single ECU. Once purchased, instructions will be emailed to the purchaser on how to access the feature. Please note that it may take up to an hour for the email to arrive after the order has been placed. Features: * Active Speed Management--traction control based on engine speed and/or driveshaft speed * Import Racepak driveshaft curve and rpm data directly into your ECU * Import crankshaft or driveshaft curves from previous pass, curve will automatically populate on the graph * Requires driveline speed sensor, be it wheel or driveshaft speed

Not Yet Reviewed

$588.95

$529.95

Dorman Engine and Powertrain Control Modules

Dorman engine and powertrain control modules are designed to process inputs from various sensors to control the engine's ignition and fueling for optimum performance and efficiency. Quality-built, each of these Dorman remanufactured engine control modules is tested to meet original equipment performance—and are less than the cost of a new ECM from the dealer!

Not Yet Reviewed

$134.99

—

$590.99

BendPak Add-On Shared Column and Platform 2-Post Parking Lifts

The BendPak PL-6000DC is an add-on shared column and platform two-post parking lift specifically designed to accommodate the needs of real estate developers, architects, engineers, automotive dealers, and commercial parking operators. They can be ganged together with shared columns allowing you to fit more units into a smaller space. The PL-6000DC dual-column parking lift can accommodate a wide array of vehicles including SUVs, sedans, and sports cars and offers the perfect combination for both long-term and short-term parking. Typically, long-term parking is the upper level and short-term parking below. They can be installed inside a typical 8-foot parking space to accommodate most cars and light trucks and operate in both indoor and outdoor locations. Product specs and advantages: * Low operating cost—platform driven by gravity when lowered, no electric motor consumption is required * Designed for installation on typical parking surfaces—detailed installation manual is provided along with floorplan and foundation drawings and video attached with products will help customers have easier installation work * Ganged column design allows multiple installations in minimum space * Commercial grade design and construction—add-on column for PL-6000DC lifts; lifting capacity: 6,000 lbs. (2,722 kg) * Galvanized and corrugated anti-slip platform * Freestanding design when ganged two or wide * Overhead power unit provides smooth quiet hydraulic operation * Platform can be stopped at different heights to fit various vehicles and ceiling heights * Full-width channel-locked center panels protect lower vehicle * Wide deck platform accommodates pickups, vans, and cars * Dual direct-drive hydraulic cylinders * Automatic safety lock combined with anti-fall device to hold platform securely * Virtually maintenance-free composite carriage bearings * Electric key switch for security and safety * Automatic shut-off when operator releases key switch * Manual lock release available in case electricity failure (optional) * Hydraulic overloading protection * Photocell sensor prohibits lift to be lowered if vehicle is parked below Safety features: * Mechanical safety locks are spaced every 4 inches * 24 V operator controls and lock release * Photocell sensor prohibits lift to be lowered if vehicle is parked below * Electric protection for power overload or improper voltage * Automatic locking system during power outage * Emergency stop button * Upper limit switch * Pressure relief valve and pressure compensated flow control valve to ensure safe operation and level lifting * Industrial-grade hydraulic cylinders feature a single-piece, pilot fitted, machined steel piston, wrapped with specially designed, pressure loaded U-cup piston seals, backups, and wear bands to virtually eliminate fluid bypass Important Note: BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). The buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).

Not Yet Reviewed

$9,395.00

Edge EAS Wideband Adapter Harnesses

Edge EAS wideband adapter harnesses are designed to be an affordable solution to add a wideband O2 sensor into your Edge monitor (not included). With this input cable accessory, you can view your wideband output from your controller right on your monitor and even data-log with the T2 to view later on Edge Dataviewer software. Monitor your wideband O2 sensor in no time with EAS wideband adapter harnesses from Edge! Additional features include: * EAS wideband adapter harness accessory * Plug-and-play installation * Allows user to easily view Air Fuel Ratio on the Diablo or Edge display monitor (not included) * Compatible with Trinity and Insight devices (sold separately)

Not Yet Reviewed

$178.95

The Detail Zone Telorvek Ford 4.6/5.4 V8 Modular EFI Wiring Harnesses

The Detail Zone puts you in control of your Ford wiring job with their Telorvek Ford 4.6/5.4 V8 Modular EFI wiring harnesses. Your 4.6 or 5.4 V8 Modular-powered ride will run like factory with these TDZ fully functional, closed-loop, fully scannable wiring systems. Installation starts with the Telorvek panels--your centrally located link between your engine sensors and computer. Detail Zone supplies all of the correct and necessary connections, terminals, and 20 ft. of fire-resistant wire--no predetermined wire lengths! Not only will you have plenty of length, but all wires are printed with sensor and terminal information, so there's no guessing which is which or where it goes! You'll have no more long hours spent tracing circuits, cutting, or soldering. The Telorvek panel is capable of being used as a breakout box required for diagnostic procedures to take voltage readings of different circuits. Take control of your project for a guess-free install and a trouble-free start-up with The Detail Zone Telorvek Ford 4.6/5.4 V8 Modular EFI wiring harnesses.

5.0 out of 5 stars ( 3 )

$1,131.85

—

$1,283.75

Ranger DST30P Wheel Balancers

Ranger DST30P wheel balancers are efficient, extremely accurate, and are built with a narrower chassis—a perfect fit for smaller garages and shops. These hybrid designs feature a magnetic transducer encoder with twice as many teeth as Ranger's larger model, taking the count from 32 to 64. As a result, they double the number of possible weight placements, meaning more accuracy and better balancing in a space-conscious, cost-effective wheel balancer. Features include: * Direct-Axis drive system keeps balancer running smoothly over time * Digital Sensor Technology--16-digit digital sensor processor and single-chip technology for better speed and accuracy in your readings * Multi-directional quartz piezoelectric load sensors * 64-tooth encoder improves automatic weight optimization * Full-tilt LED display panel * Dynamic, static, and multiple alloy balancing modes are standard * Dual plane calibration for all OEM configurations and performance wheels * Top positioning weight locator * Inside and outside measuring * Millimeter/inches selection * Ounce/gram selection * Manual wheel offset distance setting * Self-calibration function * Auto start when hood is lowered * Wheel holding manual brake pedal * Truck cone/spacer ring adapter set * Wheel calipers * Rear cone mount spring * No-mar rear cone mount pressure cup * Quick-release and mount hub nut

Not Yet Reviewed

$3,595.00

The Detail Zone Telorvek Ford 3.5 Ecoboost EFI Wiring Harnesses

Around for over 15 years, the Telorvek panel design is a link between the engine sensors and computer, allowing the adjustment of wire lengths to create an exceptionally neat installation, plus the advantage of superior troubleshooting and the ability to mount the computer anywhere inside the vehicle. When it comes to EFI wiring, Telorvek is the name to trust. The Detail Zone Telorvek Ford 3.5 Ecoboost EFI wiring harnesses come with all the sensor connections pre-installed on color-coded and printed wire which attaches to the engine and transmission using the factory ECM. These harnesses support manual and 6R80 automatic transmissions and come with detailed instructions as well as tech support. Please note: In 1996, Ford began installing Passive Anti-Theft Systems (PATS) in their ECMs. Short of installing all the components and sensors from the donor vehicle, the only way to defeat PATS is through an ECM reprogramming (sold separately).

Not Yet Reviewed

$1,283.75

The Detail Zone Telorvek Ford 5.0 EFI Wiring Harnesses

The Detail Zone Telorvek Ford 5.0 EFI wiring harnesses are for 5.0s. Are you tired of tracing circuits, cutting, and soldering? TDZ Telorvek fuel injection wiring systems provide all that you need, plus plenty of wire and instructions for a neat and professional looking job. Detail Zone systems supply you with the necessary Ford connectors with fire-resistant, printed wire--20 ft. for each sensor! And since they're printed with sensor and terminal information, there's no guessing or hours spent trying to figure out where they go! Simply plug them into the sensors, cut them to length, attach the terminals, and connect them to Telorvek panel, which then connects to the ECM. Complete closed loop systems allow your engine to run like the factory units. Diagnostic scan tool connections and MIL circuits are included, and you can also use the panel as a breakout box to take the voltage readings of different circuits. Free yourself from exhausting hours of checking for the right wires--wire your ride with The Detail Zone Telorvek Ford 5.0 EFI wiring harnesses.

5.0 out of 5 stars ( 1 )

$1,131.85

The Detail Zone Telorvek GM LS Vortec EFI Wiring Harnesses

Around for over 15 years, the Telorvek panel design is a link between the engine sensors and computer, allowing the adjustment of wire lengths to create an exceptionally neat installation, plus the advantage of superior troubleshooting and the ability to mount the computer anywhere inside the vehicle. When it comes to EFI wiring, Telorvek is the name to trust. The Detail Zone Telorvek GM LS Vortec EFI wiring harnesses give you full control over your wiring job. Designed for coil-on-plug based LS-1 iron block engines found in most Chevy and GM trucks and SUVs, the kits include the correct, new GM connectors as required, along with crosslink, fire-resistant wire. Each kit has 20 ft. of wire for each sensor allowing you to cut to the proper length, and the wires are color-coded and printed with the sensor and terminal they connect to. Telorvek systems are fully functional, closed loop system, which allows the engine to run like factory. Due to the complex anti-theft found in these computers, your ECM will need reprogrammed. The Detail Zone can provide a host of other services on the ECM, including removing all the emissions. Key features: * Telorvek panel is stainless steel construction * High-quality SAE relays and connectors * Color-coded and labeled wires * Simple, straightforward instructions * Sensor connections pre-installed * ECU reprogramming available (sold separately) * Perfect for engine swaps, hot rod, GM vehicles, and track cars

Not Yet Reviewed

$1,131.85

The Detail Zone Telorvek GM Truck TBI EFI Wiring Harnesses

The Detail Zone Telorvek GM truck TBI EFI wiring harnesses will make wiring your engine easier. These wiring kits come with all of the sensor connections pre-installed on color-coded and printed wire, which attaches to the engine and transmission using the factory ECM. TDZ Telorvek harnesses create an exceptionally neat installation, along with the advantages of superior troubleshooting. The EFI systems include detailed instructions, and include the necessary wiring for electronic transmissions. Trust Telorvek from Ron Francis and The Detail Zone to wire your next EFI project.

5.0 out of 5 stars ( 1 )

$793.75

—

$828.05

The Detail Zone Telorvek Ford 5.0 Wiring Harnesses with MAF EFI

The Detail Zone Telorvek Ford 5.0 wiring harnesses with MAF EFI make your wiring jobs easier. Are you tired of tracing circuits, cutting, and soldering? TDZ Telorvek fuel injection wiring systems provide all that you need, plus plenty of wire and instructions for a neat and professional looking job. All Detail Zone fuel injection systems supply you with the necessary Ford connectors with fire-resistant, printed wire--20 ft. for each sensor! Simply plug them into the sensors, cut them to length, attach the terminals, and connect them to the Telorvek panel, which then connects to the ECM. The systems are complete, operate the engine in a closed loop, and include diagnostic scan tool connections and MIL circuits so that your engine runs like factory and can be scanned. Also, this design allows you to use the panel as a breakout box to take voltage readings of different circuits. Free yourself from exhausting hours of checking for the right wires--wire your ride with The Detail Zone Telorvek Ford 5.0 wiring harnesses with MAF EFI.

Not Yet Reviewed

$793.75

The Detail Zone Telorvek Ford 5.0 Coyote EFI Wiring Harnesses

The Detail Zone Telorvek Ford 5.0 Coyote EFI wiring harnesses make wiring your project easier. These wiring kits come with all of the sensor connections pre-installed on color-coded and printed wire, which attaches to the engine and transmission using the factory ECM. TDZ Telorvek harnesses create an exceptionally neat installation, along with the advantages of superior troubleshooting. The EFI systems include detailed instructions, and will support manual and 6R80 automatic transmissions. Trust Telorvek from Ron Francis and The Detail Zone to wire your next EFI project.

Not Yet Reviewed

$1,283.75

—

$1,309.95

RIPP Superchargers 2015-17 Jeep Wrangler JK Supercharger Kits

RIPP Superchargers 2015-17 Jeep Wrangler JK supercharger kits feature a Vortech V3 self-contained centrifugal supercharger, an air-to-air front mounted intercooler, larger plug-and-play primary injectors, and a proprietary plug-and-play map sensor. RIPP requires your vehicle's VIN and odometer mileage to send out a new PCM that will work in your Jeep as well as a DiabloSport inTune. You will replace your Jeep's PCM with the Diablo Modified one (it's only four screws to unhook). Once that's complete, you install the tune with your DiabloSport tuner and you're ready to go! If you need to go to the dealership for service work, all you would need to do is re-install your original PCM and they will not be able to tell that you have done any modifications. These supercharger kits bolt on in six to eight hours and are considered the most complete, easy-to-install systems on the market. RIPP Superchargers has spent an enormous amount of time tuning in all conditions, including high altitudes, hot/dry deserts, and cold/wet climates, to provide you with better drive quality.

Not Yet Reviewed

$6,049.00

—

$6,149.00

GearStar GM 6L90E Level 3 Transmissions

GearStar GM 6L90E Level 3 transmissions come with a custom billet Yank Performance torque converter. This is the first of many upgrades that go into making sure that each transmission is not only built for performance and durability but longevity as well. These units come programmed with a VIN number that will work with most aftermarket transmission controllers. If this is going into a stock application, GearStar has the ability to program the transmission with your VIN number to ensure it's a direct replacement. The next upgrades for this transmission are expanded capacity performance clutch packs. Level 3 transmissions come with all new electrics, including the wiring harness, internal computer, all sensors and solenoids—along with all new bushings, bearings, and seals. To help with durability and performance, the transmissions come with a billet pump rotor, billet 4-5-6 clutch hub, hardened and reinforced clutch hubs, and a hardened rear planetary gear assembly. Every transmission is assembled by one of GearStar's five expert builders. The transmission packages arrive dyno tested with 100 miles already on the transmission, which means the break-in procedure has been done and they're ready to go!

Not Yet Reviewed

$8,945.00

—

$9,445.00

Billet Specialties Redline Series Drag Pack Polished Wheels

Billet Specialties Redline Series Drag Pack polished wheels are lightweight, one-piece, forged aluminum wheels designed for modern muscle cars to improve performance at the drag strip and on the street. They feature a modern multi-spoke style with a bright, hand-polished finish and machined accents, offering strength and reduced weight compared to stock wheels. Redline Drag Packs are made from 6061-T6 aluminum, built for durability, and available for various applications like Mustangs, Camaros, Challengers, Chargers, and Cadillac CTS-V. Additional details: * Construction: One-piece monoblock forged 6061-T6 aluminum for high strength and low weight * Performance: Significantly lighter than factory wheels, improving acceleration and handling * Accepts factory conical seat lug nuts and often rear wheels accommodate TPMS sensors * Testing: Meets or exceeds SAE J2530 specifications for safety and performance

Not Yet Reviewed

$774.00

Zumbrota Remanufactured Manual Transmissions

Zumbrota remanufactured manual transmissions are some of the most dependable 5-speed, 6-speed, and transaxle units available. Each transmission is put through tremendous testing and inspections to assure the highest quality possible to use in your vehicle. Benefits of Zumbrota remanufactured manual transmissions include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All housing and top covers are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent inspection of internal parts, including gear wear checks, main shaft straightness test and synchronizer testing * 100 percent replacement of seals, bearings, and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty

3.71 out of 5 stars ( 21 )

$1,203.99

—

$2,291.99

Cooling Components Brushless Fans

Cooling Components fan portfolio covers a wide range of applications, allowing you to purchase the perfect fan and shroud match for your radiator application. The cooling fans can be applied in any high performance car and can be trimmed to fit, making them ideal for fabricators and especially Street Rods and Street Machine creators. Cooling Components brushless fans are strong, quiet, and efficient. Available in different sizes of single or dual fan units, they feature a SPAL 7-blade 14 in. fan or two SPAL 12 in. fans, along with the longer life of a brushless motor. Choose the cooling setup best suited to your hot rod or muscle car.

Not Yet Reviewed

$1,089.00

—

$1,609.50

Zumbrota Remanufactured Axle Assemblies

Zumbrota Drivetrain remanufactured axle assembles offer reliable performance at a value price. They're available for thousands of applications—from passenger and off-road vehicles, to race cars and pulling trucks. The axle tubes are straightened to OE specifications; the housings are hydro-blasted and rinsed, then tested for surface wear and cracks; and the gear patterns and rolling torque are properly adjusted to ensure optimum tooth contact. Zumbrota replaces all seals, bearings, crush sleeves, pinion nuts, and shims on the front and/or rear axle assemblies. Order the replacement model recommended for your specific vehicle.

4.0 out of 5 stars ( 9 )

$999.99

—

$2,199.99

American Racing VN506 Mag Gray Wheels with Polished Lip

As part of American Racing's Heritage Series wheel lineup, the VN506 Mag Gray wheels with polished lip offer a stylish and time-honored rallye design with a touch of modern edge. Each rim is built from one-piece cast aluminum alloy to ensure superb strength, performance, and durability without excessive weight. The VN506 wheels' unique spoke pattern, mag gray finish, and polished lip accent gives a knockout look to your vehicle. They're available in a variety of bolt patterns, diameters, and offsets—and include a polished rally center cap.

5.0 out of 5 stars ( 4 )

$255.99

—

$425.99

American Racing VN506 Rally Polished Wheels

American Racing VN506 polished wheels are part of the company's Heritage Series lineup. These rims are a stylish and time-honored rallye wheel with a modern edge. Each rim is built from one-piece cast aluminum alloy to ensure superb strength, performance, and durability without excessive weight. VN506 wheels feature a unique spoke pattern design and a beautiful polished finish that gives a knockout look to your ride. They're available in various bolt patterns, diameters, and offsets—and include a polished rally center cap.

5.0 out of 5 stars ( 3 )

$340.99

—

$478.99

Ultra Wheel 103 Xtreme Beadlock Machined Wheels

The premise behind the beadlock wheel is simple: they provide a mechanical means for attaching the bead of the tire onto the wheel. So, when you're ready to outfit your rig or SUV puddle jumper with stunning style and functionality, check out Ultra Wheel's off-road lineup, like these 103 Xtreme beadlock machined wheels! They're true beadlock wheels that are available in several different sizes, bolt patterns, offsets, and finishes—so you can blaze trails with the best-looking rims available!

Not Yet Reviewed

$730.99

57 Results Found For "sensor"