Free Shipping on Orders Over $109 at Summit Racing

Howards Cams Billet Aluminum Rocker Arms

The unique full body design of these Howards Cams billet aluminum rocker arms offers less flex and will withstand 800-plus lbs. of spring pressure at over .800 in. lift. These rockers are 100 percent CNC-machined and are designed for more retainer and spring clearance than most other brands. They feature needle-bearing fulcrums and roller tips, centerless ground trunnions, centerless ground pins and rollers, and thick-walled adjusting nuts.

4.75 out of 5 stars ( 44 )

$36.99

Crower Stainless Steel Shaft Mounted Rocker Arm Systems

For those of you that feel most confident running a steel-based valve train, look no further than the collection of Crower stainless steel shaft-mounted rocker arm systems. Every configuration has been rigorously scrutinized to offer extreme rigidity and accuracy while optimizing the moment of inertia phenomena condition. Crower engineers made ease of installation and maintenance a top priority--so you'll never waste a moment when time is critical at the track. These stainless steel shaft rocker systems are a perennial favorite of dirt late models and marine endurance competitors. Sustained high temperatures have little effect on the strength properties of stainless steel so components made from this material typically have a longer life expectancy than similar components made from aluminum. All Crower shaft mount rocker arms are available with Crower's needle bearing roller tip option. They greatly reduce friction for added horsepower and decreased valve guide and valve stem wear. The lighter tips deliver greater valve control for increased rpm and improve valve spring longevity by decreasing heat compared to traditional non-needle designs.

5.0 out of 5 stars ( 2 )

$318.99

—

$3,285.99

Crower Rocker Arm Roller Tip Bearings

Crower rocker arm roller tip bearings are the perfect upgrade for your Crower roller tip stainless steel roller rocker arms. They include the pin, bearing, and washers to complete the installation.

Not Yet Reviewed

$307.99

COMP Cams Aluminum Roller Rocker Arms

COMP Cams aluminum roller rocker arms are made from a high-quality alloy, anodized for durability and good looks. They have needle-bearing trunnions to allow for high valve spring loads (over 350 lbs.) and a tensile strength of 80,000 psi. While these rockers are more expensive than COMP Cams High Energy or Magnum rockers, they're a great choice for any race application.

Not Yet Reviewed

$69.95

Direct Sheetmetal Rocker Boxes

Direct Sheetmetal rocker boxes are available in front, center, and rear sections. They must be ordered separately by sides and sections. Please call to specify either 2-door or 4-door (short door). All Direct Sheetmetal parts are designed to be installed by the typical hot rod enthusiast in their garage or workshop. Although DSM rocker panels do not typically require trimming, every car is different and some may need the extra step. Remember, when it comes to sheet metal, it's harder to add material than to remove it.

Not Yet Reviewed

$117.99

Roadster Shop SPEC Chassis Kits

Roadster Shop SPEC chassis kits offer Roadster Shop quality at an affordable price point. The SPEC Series is an engineering-focused approach, using the latest in manufacturing technology, to build the lightest, strongest, and easiest-to-install complete chassis systems. These technologies have been used to streamline procedures resulting in lower cost and shorter lead times. The SPEC independent front suspension is engineered to deliver outstanding performance in a user friendly package. It features proprietary suspension geometry designed to provide the best balance of ride quality and performance in its class. Available as On-The-Shelf, pre-configured chassis or custom specifications to suit your needs. Features and benefits of Roadster Shop SPEC chassis kits include: * Full-chassis performance at a smaller component price * Unparalleled quality * Add the strength of a full frame with no floor modifications on most applications * CNC laser-cut, TIG-welded, and contoured "Laser Rails" frame rails * No kinks, bends, or stressed areas that are prone to flex like mandrel-bent tubing * Stronger, lighter, and more precise * CNC-located factory mounts built into the frame for easy, vehicle specific installation * Frame rails accommodate mini-tubs and wider wheels * Aggressive ride heights for the modern pro-touring look * Choice of coilover or air suspension for many applications * Air suspension chassis will lay the rockers on the ground (varies with tire size) * Truck rear frame rail kick ups engineered for minimal bed modifications while allowing rockers to lie on the ground * Crossmembers and chassis bracing allow 3 in. exhaust * Adjustable, drop-out transmission mounts (tunnel mods may be necessary for larger T-56 and 4L80 transmissions) * Vehicle specific body (cab and bed on trucks), bumper, and core support mounts * Single-adjustable billet coilovers * Power rack and pinion steering * Easy-to-adjust upper A-arm eccentric mounts for fast and accurate alignments * Wilwood Pro Spindles * Parallel 4-bar rear suspension * Ford 9 in. housing with 31 spline axles * Optional mounts, coilovers, sway bars, brake packages, and rear-end gearing available on custom-order chassis * 5 x 4.75 wheel bolt pattern * Frames are shipped as bare steel

4.21 out of 5 stars ( 14 )

$13,763.99

—

$15,470.99

LSM Racing Valve Lash Torque Wrenches

LSM Racing has the perfect way to adjust your valve lash, with no fear of overtightened or cracked rocker arm jam nuts. Available with a 3/8 in. drive or a custom ordered permanently attached socket pre-welded on. Compatible with all shaft style rocker arms.

5.0 out of 5 stars ( 8 )

$249.99

AFR 357cc Magnum BBC Cylinder Heads

If huge horsepower is what you are searching for, AFR 357cc Magnum aluminum cylinder heads will certainly deliver. With AFR's fully CNC-ported 357cc heads flowing 425 cfm, they represent the ultimate in airflow for your big block Chevrolet. These cylinder heads were targeted at larger cu. in. engines (509-632 c.i.d.) looking for maximum horsepower and rpm capabilities with a primary operating range of 3,500-8,000 rpm (this range is an average and will vary with engine displacement and component selection). These aluminum heads also provide impressive torque figures at higher rpm levels. Blown, turbo, and nitrous engines will especially like the larger, higher flowing intake ports. AFR 357cc Magnum BBC cylinder heads will work best with camshafts exceeding 0.750 in. gross valve lift to make better use of the substantial airflow found in the higher lift range. The AFR 357cc heads come standard with AFR's trademark 3/4 in. thick cylinder head deck, reinforced rocker stud bosses, and premium one-piece stainless steel 2.300 in. intake and 1.880 in. exhaust valves. The AFR's fully CNC-ported 357 heads come with a 121cc chamber and are available with an optional 114cc combustion chamber as well. Order the cylinder head model suited to your needs.

Not Yet Reviewed

$4,194.00

Howards Cams 210 Degree Tip Heavy Wall Swedged End Pushrods

A must for all high-lift applications. Howards Cams 210 degree tip pushrods give extra radius clearance to the rocker pushrod cup area. They're strongly recommended with all shaft-style rocker systems. The pushrods are formed from SAE 4130 .080 in. wall centerless ground tubing and the ends are precision-swedged to exacting tolerances. They are case-hardened to Rc 60, feature a black oxide finish, and are laser-etched with the size and part number. Custom pushrods are available in .025 in. increments. Howards Cams precision pushrods are an affordable answer to your high performance valvetrain.

4.33 out of 5 stars ( 6 )

$14.99

—

$39.99

Brodix Cylinder Heads Top-End Packages for Chevy

Bolt one of these complete Brodix top-end packages for Chevy onto your short block for the potent tune-up performance you expect--without the wasted time and hassle of assembling all of the various components on your own. The experts at Brodix Cylinder Heads have done the legwork for you, providing quality heads, plugs, gaskets, covers, and hardware in one convenient kit. Brodix top-end packages include: * Fully assembled Brodix cylinder heads * Spark plugs * Head gaskets, intake gaskets, exhaust gaskets, carburetor gaskets, and valve cover gaskets * Valve covers with studs and nuts * Head bolts and washers * Intake bolts and washers * Available with single or dual-plane intake manifolds * Free Brodix hat

4.67 out of 5 stars ( 3 )

$4,880.99

AFR 210cc SBC Eliminator Racing Heads

AFR 210cc SBC Eliminator racing heads are available in two stages of performance. The race-ready version features 100 percent CNC-ported intakes—and 100 percent CNC-ported intakes with greater detail. They come with 100 percent CNC-ported combustion chambers and 80cc exhaust ports with a 3/4 in. thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight 8mm, 2.080 in. intakes and 1.600 in. exhausts with AFR's hardened ductile iron interlocking valve seats. The valve springs included are intended for use on roller camshafts. The exceptional flow characteristics, 23 degree valve angle, and standard valve spacing make these the perfect cylinder heads for 350 to 400 c.i.d. engines in bracket drag cars, sportsman oval trackers, and highly modified street-class cars operating between 3,000 and 7,500 rpm (higher rpm ranges are possible, depending on the combination of parts). The 210cc aluminum cylinder heads are available for either standard or spread port exhausts, bare or assembled style.

4.81 out of 5 stars ( 16 )

$2,530.00

—

$3,199.00

Brodix Cylinder Heads IK 215 Cylinder Heads for Small Block Chevy

Brodix offers IK 215 Series cylinder heads for small block Chevy 350 and 400 engine applications—focusing on the only two things that matter: performance and price! They include a revolutionary ultra casting, versatile intake ports designed for optimum versatility, and combustion chambers that allow the use of several types of fuel. Standard features are A-356 virgin aluminum alloy, phosphorous bronze valve guides, valve seats for use with unleaded fuel, ends milled and drilled for accessories, and a straight spark plug angle. These are the most affordable high-quality aluminum cylinder heads on the market. The hassle-free top-end combo kits include: * Complete cylinder heads * Intake manifold (4150 Series) * Valve covers * Headbolts and washers * Intake bolts and washers * Valve cover studs and nuts * Head gaskets * Intake gaskets * Exhaust gaskets * Carburetor gaskets * Valve cover gaskets * Spark plugs * Brodix hat IK Series 23-degree cylinder head details: * Standard valve cover pattern * 64 cc / 70 cc combustion chambers * Straight spark plugs * Ends milled and drilled for accessories * Ductile iron valve seats for use with unleaded fuel * CNC-ported combustion chambers available as large as 75 cc

Not Yet Reviewed

$3,255.99

12 Results Found For "rocker"