Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
- Your search has been changed to "powers strip"
Availability
10 Results Found For "powers strip"
ATI Street Rod Transmission Packages
Take the guesswork out of which parts to buy and save money with ATI Street Rod transmission packages! Choose from several applications that include one of ATI's Street/Strip transmissions, a Streetmaster torque converter, a transmission cooler, and a "Trick Stick" locking dipstick and tube. Available with a variety of transmission options and components, these ATI Street Rod transmission packages can handle the power of your high performance engine and transfer that power to the rear differential.
Not Yet Reviewed
$3,419.99
—
$9,243.99
Baer Brakes SS4+ Disc Brake Systems
For serious stopping power, check out Baer's SS4+ disc brake systems. They're designed to fit most 15 in. wheels, and feature Baer's S4 4-piston caliper mounted to a 2-piece slotted, drilled, and zinc plated rotor. Kits include high-grade stainless hardware and a pre-assembled 2-piece rotor. These systems are available for the front or rear, in black, silver, and red finishes. Order the model designed for your axle and wheel bolt pattern. If you've been looking for a street-legal, lightweight, drag strip or autocross-compatible brake system—you've come to the right place!
( 10 )
$1,949.95
JE Pistons 400 Small Block 23 Degree Dome Pistons
JE Pistons offers 400 small block 23-degree dome top pistons for a wide range of applications, including many Chevy vehicles from 1967 and up. These single replacements are forged using 2618 aluminum, yielding high tensile strength needed for high-demand performance. The pistons are designed specifically for each engine. Additional details: * Proprietary Forged Side Relief (FSR) forging design minimizes friction and power loss with reduced skirt width and saves additional weight with a shorter wrist pin * Skirt coating (depending on application) reduces friction and wear on piston skirts and cylinder walls while simultaneously reducing operating noise * Accumulator groove (depending on application) helps reduce pressure from combustion gases, reducing ring fluttering and improving ring seal for consistent power As the leader in forged racing pistons, JE Pistons has applied over 75 years of experience to its wide range of premium forged pistons for domestic applications. JE pistons are designed for each specific engine and racing application to provide the ultimate combination of durability and performance. From dirt track to drag strip, JE Pistons' performance is proven in victory lane time and time again.
Not Yet Reviewed
$199.99
Wilwood Forged Dynalite Big Brake Front Brake Kits
With Wilwood Forged Dynalite Big Brake front brake kits, you'll be ready for show, street, or strip! Track-ready performance and high-tech style come with oversized rotors, forged billet Dynalite calipers, and high performance Wilwood SmartPads. These front brake kits are fully compatible with OE master cylinder output. Options for the caliper finish and rotor design make it simple to match the brake response and style preferences on all types of daily drivers, race vehicles, and ultra-styled show machines! The choice is yours for big stopping power--choose Wilwood Forged Dynalite Big Brake front brake kits.
( 134 )
$1,222.78
American Powertrain ProFit Tremec TKX Manual Transmission and Installation Kits
American Powertrain ProFit Tremec TKX manual transmissions and installation kits put the power to the pavement with unmatched durability and versatility. Tremec has normally sourced their aftermarket transmissions from the OE side, such as the Magnum T-56 and the T-5, but this new design is made from the ground up as a strictly aftermarket transmission. Designed to fit classic muscle cars and customs, the TKX has a tighter, more streamlined case, and features 600 lbs.-ft. of torque capacity and are capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. The compact design provides clearance in most transmission tunnels without floor modifications, while case strength has increased from previous models with the new 3-piece aluminum housing and gaskets at all flanges simplifies installation and eliminates fluid leaks. Additional features include: * Designed with your specific vehicle application in mind * Available with multiple gear ratio configurations for compatibility for multiple applications with three shifter locations * Multi-cone synchronizers and synchronizer rings are made of sintered bronze and carbon for superior shifts * All gears are supported by caged needle bearings to reduce end play * Gears and shafts are made from ASTM 4615 grade steel and provide increased torque carrying capacity * TKX manual transmissions have 31-spline output shafts for added strength, built-in reverse light switches, and cruise control safety switches * The TKX also has separate GM and Ford case patterns and input configurations—with integrated GM and Ford transmission mount patterns * Installation kits include a driveshaft slip yoke made from cryogenically hardened steel, a polyurethane transmission mount, a steel roller pilot bearing, and a reverse light wiring harness
( 1 )
$4,395.00
Boss Hog Street Bandit Torque Converters
Torque converters are considered one of the most mysterious mechanical components in today's vehicles. They function like a clutch, and keep the engine running even when the vehicle comes to a halt. By designing the stall speed to match both the engine and desired stall speed, ACC Performance converters help low-end idle speeds, improve performance, and acceleration. ACC Performance Products has emerged as an out-right leader in torque converters and here's why: * Boss Hogs are welded, not furnace-brazed; furnace brazing is not the best way to adhere torque converter components, it will erode and ruin the stators and all rotating parts * Industrial Torrington bearings handle more torque than smaller, uncased needle bearings * Aircraft aluminum washers instead of fiber washers put more horsepower and torque directly to the ground * ACC converters are hand-built and tested to ensure that you get the best converter money can buy * With returns below one percent, you are assured of the highest quality parts available * Street Bandit converters are designed to handle as much as 650 hp * Custom-engineered turbine hubs maintain the highest quality, strength, and durability * Stators are built with high-flow vents and channels for greater cooling to handle greater power and higher temperatures * Engineered with a single bolt pattern that makes ACC converters surprisingly light to free up your motor and allow it to gain rpm quicker Notes: * Boss Hog Street Bandit torque converters are not designed to handle the extreme shock and abuse of nitrous oxide or trans-brakes * It is imperative that a transmission cooler be added with any torque converter that is rated over stock stall speed
( 104 )
$609.90
Hughes Performance XTM Heavy-Duty Towing Series Torque Converters
Hughes Performance XTM Heavy-Duty Towing Series torque converters take away the worry of the "long grade" with the "heavy load." These converters are designed with heavy-duty use in mind, with a heavy-duty one-piece hub and a balloon plate, a heavy-duty sprag, and silicon spot-welded fins in the turbine and cover, providing strength beyond compare. The combination of their stator and specific application fin applies maximum power to your wheels, giving you more available engine power. These XTM converters run 7 qt. of fluid more per minute than your OE or stock converter. Because of the increased cooler flow, the transmission and converter will operate cooler, increasing the life of the tranny and converter.
( 27 )
$671.99
AED Super-Mod Series Carburetors
AED Super-Mod Series carburetors are custom-tailored for your specific application to keep you first off of the line. AED uses a specific set of parameters—engine size, rpm range, and power level—to calibrate venturi and metering sizing and properly size throttle bore and fuel circuits for maximum airflow, response, and power. AED Super-Mod Series throttle bores are fully CNC-ported, all corners are balanced, and the completed carburetors are then "wet-flow" tested to ensure top performance. Applying additional information that you provide, AED fine-tunes your selection for a custom fit for your machine. Whether you're a professional racer or an inspired amateur, AED will help you to obtain the proper carburetor to keep your runs successful.
Not Yet Reviewed
$979.99
—
$1,017.99
AFR 227cc SBC Eliminator Race Ready Racing Heads
AFR 227cc SBC Eliminator Race Ready Racing heads offer outstanding track performance at a competitive price. Exhaust and intake ports and combustion chambers are 100 percent CNC-ported, with coarser machine levels for terrific flow characteristics and big power gains. The 227cc SBC Eliminator heads feature a 3/4 in. thick head deck, ideal for nitrous or blower applications. They come complete and ready-to-run with quality AFR-proven components for maximum reliability—or choose "bare" heads (no parts) to design your own ultimate power package. These cylinder heads are available in standard and spread port exhausts. AFR 227cc SBC Eliminator Race Ready racing heads are a great choice for budget-minded racers.
( 9 )
$2,530.00
AED Pro-Series Drag Racing Carburetors
AED Pro-Series drag racing carburetors are custom-tailored for your specific application to achieve high flow rates without losing acceleration or torque. AED uses a specific set of parameters—engine size, rpm range, and power level—to calibrate venturi and metering sizing and properly size throttle bore and fuel circuits. They'll increase strength and fuel atomization to produce more torque and power over a wider rpm range than previously obtained. AED Pro-Series carburetors boast fully CNC-machined, centered, and ported main bodies and custom-machined boosters; the completed carburetors are then "wet-flow" tested to ensure top performance. Applying additional information that you provide, AED fine-tunes your selection for a custom fit for your machine. Whether you're a professional racer or an inspired amateur, AED will help you to obtain the proper carburetor to keep your runs successful.
( 1 )
$1,219.99
