Free Shipping on Orders Over $125 at Summit Racing

The Detail Zone Telorvek Ford 4.6/5.4 V8 Modular EFI Wiring Harnesses

The Detail Zone puts you in control of your Ford wiring job with their Telorvek Ford 4.6/5.4 V8 Modular EFI wiring harnesses. Your 4.6 or 5.4 V8 Modular-powered ride will run like factory with these TDZ fully functional, closed-loop, fully scannable wiring systems. Installation starts with the Telorvek panels--your centrally located link between your engine sensors and computer. Detail Zone supplies all of the correct and necessary connections, terminals, and 20 ft. of fire-resistant wire--no predetermined wire lengths! Not only will you have plenty of length, but all wires are printed with sensor and terminal information, so there's no guessing which is which or where it goes! You'll have no more long hours spent tracing circuits, cutting, or soldering. The Telorvek panel is capable of being used as a breakout box required for diagnostic procedures to take voltage readings of different circuits. Take control of your project for a guess-free install and a trouble-free start-up with The Detail Zone Telorvek Ford 4.6/5.4 V8 Modular EFI wiring harnesses.

5.0 out of 5 stars ( 3 )

$1,166.15

—

$1,322.95

The Detail Zone Telorvek Ford 3.5 Ecoboost EFI Wiring Harnesses

Around for over 15 years, the Telorvek panel design is a link between the engine sensors and computer, allowing the adjustment of wire lengths to create an exceptionally neat installation, plus the advantage of superior troubleshooting and the ability to mount the computer anywhere inside the vehicle. When it comes to EFI wiring, Telorvek is the name to trust. The Detail Zone Telorvek Ford 3.5 Ecoboost EFI wiring harnesses come with all the sensor connections pre-installed on color-coded and printed wire which attaches to the engine and transmission using the factory ECM. These harnesses support manual and 6R80 automatic transmissions and come with detailed instructions as well as tech support. Please note: In 1996, Ford began installing Passive Anti-Theft Systems (PATS) in their ECMs. Short of installing all the components and sensors from the donor vehicle, the only way to defeat PATS is through an ECM reprogramming (sold separately).

Not Yet Reviewed

$1,322.95

The Detail Zone Telorvek GM LS Vortec EFI Wiring Harnesses

Around for over 15 years, the Telorvek panel design is a link between the engine sensors and computer, allowing the adjustment of wire lengths to create an exceptionally neat installation, plus the advantage of superior troubleshooting and the ability to mount the computer anywhere inside the vehicle. When it comes to EFI wiring, Telorvek is the name to trust. The Detail Zone Telorvek GM LS Vortec EFI wiring harnesses give you full control over your wiring job. Designed for coil-on-plug based LS-1 iron block engines found in most Chevy and GM trucks and SUVs, the kits include the correct, new GM connectors as required, along with crosslink, fire-resistant wire. Each kit has 20 ft. of wire for each sensor allowing you to cut to the proper length, and the wires are color-coded and printed with the sensor and terminal they connect to. Telorvek systems are fully functional, closed loop system, which allows the engine to run like factory. Due to the complex anti-theft found in these computers, your ECM will need reprogrammed. The Detail Zone can provide a host of other services on the ECM, including removing all the emissions. Key features: * Telorvek panel is stainless steel construction * High-quality SAE relays and connectors * Color-coded and labeled wires * Simple, straightforward instructions * Sensor connections pre-installed * ECU reprogramming available (sold separately) * Perfect for engine swaps, hot rod, GM vehicles, and track cars

Not Yet Reviewed

$1,166.15

On Sale

Edge EAS Wideband Adapter Harnesses

Edge EAS wideband adapter harnesses are designed to be an affordable solution to add a wideband O2 sensor into your Edge monitor (not included). With this input cable accessory, you can view your wideband output from your controller right on your monitor and even data-log with the T2 to view later on Edge Dataviewer software. Monitor your wideband O2 sensor in no time with EAS wideband adapter harnesses from Edge! Additional features include: * EAS wideband adapter harness accessory * Plug-and-play installation * Allows user to easily view Air Fuel Ratio on the Diablo or Edge display monitor (not included) * Compatible with Trinity and Insight devices (sold separately)

Not Yet Reviewed

$185.95

$94.95

The Detail Zone Telorvek Ford 5.0 Coyote EFI Wiring Harnesses

The Detail Zone Telorvek Ford 5.0 Coyote EFI wiring harnesses make wiring your project easier. These wiring kits come with all of the sensor connections pre-installed on color-coded and printed wire, which attaches to the engine and transmission using the factory ECM. TDZ Telorvek harnesses create an exceptionally neat installation, along with the advantages of superior troubleshooting. The EFI systems include detailed instructions, and will support manual and 6R80 automatic transmissions. Trust Telorvek from Ron Francis and The Detail Zone to wire your next EFI project.

Not Yet Reviewed

$1,322.95

—

$1,322.99

The Detail Zone Telorvek GM Truck TBI EFI Wiring Harnesses

The Detail Zone Telorvek GM truck TBI EFI wiring harnesses will make wiring your engine easier. These wiring kits come with all of the sensor connections pre-installed on color-coded and printed wire, which attaches to the engine and transmission using the factory ECM. TDZ Telorvek harnesses create an exceptionally neat installation, along with the advantages of superior troubleshooting. The EFI systems include detailed instructions, and include the necessary wiring for electronic transmissions. Trust Telorvek from Ron Francis and The Detail Zone to wire your next EFI project.

5.0 out of 5 stars ( 1 )

$823.15

—

$857.45

The Detail Zone Telorvek Ford 5.0 EFI Wiring Harnesses

The Detail Zone Telorvek Ford 5.0 EFI wiring harnesses are for 5.0s. Are you tired of tracing circuits, cutting, and soldering? TDZ Telorvek fuel injection wiring systems provide all that you need, plus plenty of wire and instructions for a neat and professional looking job. Detail Zone systems supply you with the necessary Ford connectors with fire-resistant, printed wire--20 ft. for each sensor! And since they're printed with sensor and terminal information, there's no guessing or hours spent trying to figure out where they go! Simply plug them into the sensors, cut them to length, attach the terminals, and connect them to Telorvek panel, which then connects to the ECM. Complete closed loop systems allow your engine to run like the factory units. Diagnostic scan tool connections and MIL circuits are included, and you can also use the panel as a breakout box to take the voltage readings of different circuits. Free yourself from exhausting hours of checking for the right wires--wire your ride with The Detail Zone Telorvek Ford 5.0 EFI wiring harnesses.

5.0 out of 5 stars ( 1 )

$1,166.15

Wiring Specialties Pro Series Wiring Harnesses

Wiring Specialties Pro Series wiring harnesses offer the best in aesthetics, weight savings, and reliability. Even better, the installation is simple and efficient! Check out the features and benefits, then completely replace your old harness and forget about electrical gremlins--thanks to Wiring Specialties Pro Series harnesses. Pro Series features and benefits: * Plug-and-play installation: The engine requires only 3 wires to be connected--starter signal, ignition signal, and fuel pump * No cores and additional wiring required * Point-to-point digital test on every wire * Constructed using OEM connectors and TXL Automotive wire with OEM colors * Made with high temp TXL wire (-40C to +125C operating temperature) with adhesive shrink tubing * Wrapped in lightweight nylon loom with -94C to +257C operating temperature * They have integrated transmission harnesses, and allow more customization when selecting options like ECU, injector, and AFM connectors * They use high-temperature braided sleeving, and are built to exceed OEM specs for wire temperature rating, quality, and power/ground routing * The harnesses are designed from the ground-up for performance, optimization and modularity, plus they're "tucked" for a clean professional appearance * Developed in-house on actual engines to ensure a perfect fit to the engine and chassis. * Wiring Specialties use an OEM-style wiring construction process. They utilize hydraulic crimping machines that crimp wire and terminals with over 2000 lbs. of force. All of their harnesses undergo a wire-to-wire electronic test after assembly, to ensure that no wire pinout mistakes were made during assembly.

Not Yet Reviewed

$819.00

The Detail Zone Telorvek Ford 5.0 Wiring Harnesses with MAF EFI

The Detail Zone Telorvek Ford 5.0 wiring harnesses with MAF EFI make your wiring jobs easier. Are you tired of tracing circuits, cutting, and soldering? TDZ Telorvek fuel injection wiring systems provide all that you need, plus plenty of wire and instructions for a neat and professional looking job. All Detail Zone fuel injection systems supply you with the necessary Ford connectors with fire-resistant, printed wire--20 ft. for each sensor! Simply plug them into the sensors, cut them to length, attach the terminals, and connect them to the Telorvek panel, which then connects to the ECM. The systems are complete, operate the engine in a closed loop, and include diagnostic scan tool connections and MIL circuits so that your engine runs like factory and can be scanned. Also, this design allows you to use the panel as a breakout box to take voltage readings of different circuits. Free yourself from exhausting hours of checking for the right wires--wire your ride with The Detail Zone Telorvek Ford 5.0 wiring harnesses with MAF EFI.

Not Yet Reviewed

$813.35

RJS Individual Belts

RJS Individual belts are perfect if you're building a custom harness or looking for a replacement belt for your racing harness. These belts are built to the highest standards using high quality webbing and hardware. RJS individual belts are available in multiple colors and buckle types.

3.86 out of 5 stars ( 7 )

$42.51

Ron Francis Wiring Ford Flathead 6 V To 12 V Conversion Wiring Harnesses

Convert to 12 V the easy way with Ron Francis Wiring Ford flathead 6 V to 12 V conversion wiring harnesses. With the reliability of 12 V power, you'll experience faster starts and brighter lights. Plus, you'll be able to add accessories without an extra battery in the trunk and still keep your stock appearance! Replace frayed wires and convert your stock Ford flathead 6 V to 12 V with Ron Francis conversion wiring harnesses.

Not Yet Reviewed

$548.75

Ron Francis Wiring Ford Powered EXPRESS Wiring Systems

Ron Francis EXPRESS wiring systems make high performance wiring easier--even if you're not a pro! Their Ford powered EXPRESS wiring systems are built for your custom wiring applications and are delivered with all of the connectors and wiring that you need for your complete car, including the starter, alternator, steering column, and even the cooling fan relay! Ron Francis systems start with a terminal block crafted from polished stainless steel and include only high-temperature, fire-resistant, color-coded wiring, along with the highest quality terminals to do your wiring job right. And add-on accessories are not a problem, as a multi-connection battery junction block is included to reduce the number of wires going to your starter. Plus, their clear, color-coded instructions make your installation clean and professional. You can achieve successful results when you wire your Ford with Ron Francis EXPRESS wiring systems.

5.0 out of 5 stars ( 4 )

$657.53

Ron Francis Wiring Bare Bonz / EXPRESS Wiring Systems

Ron Francis Wiring Bare Bonz / EXPRESS wiring systems are long wire harness options for mounting your fuse panel, Bare Bonz or Express in the rear of your vehicle.

Not Yet Reviewed

$166.55

Ron Francis Wiring GM Powered EXPRESS Wiring Systems

The impossible is possible with Ron Francis EXPRESS wiring systems! Built for your custom wiring applications, their GM powered EXPRESS systems deliver all of the connectors and wiring that you need for your complete car, including the starter, alternator, steering column, and even the cooling fan relay! Ron Francis EXPRESS systems utilize a polished stainless steel terminal block with high-temperature, fire-resistant, color-coded wiring and the highest quality terminals. And, with their clear, simple, color-coded instructions, the finished job is professional looking and clean, with less chance of problems. You'll be able to drive, pass inspection, and add accessories in the future. Wiring your ride is not impossible--it's a reality with Ron Francis GM powered EXPRESS wiring systems.

4.79 out of 5 stars ( 24 )

$657.53

Half Scale Dragsters Practice Tree Throttle Pedal Harnesses

Create the ultimate simulator with Half Scale Dragsters practice tree throttle pedal harnesses. These practice tree throttle pedal harnesses allow you to easily hook up your practice tree to your junior dragster and practice your lights while in your dragster! They work on 2008 and newer style pedals; plus, installation is easy with just two screws to the throttle pedal. Improve your reaction times with one of Half Scale Dragsters' practice trees hooked up to one of their throttle pedal harnesses.

Not Yet Reviewed

$37.99

Vintage Air Gen-V SureFit Systems Complete Kits

Vintage Air Gen-V SureFit Systems complete kits are powerful and intelligent climate control systems. Available for vehicles with or without factory air, they use an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and-fin cooling coils provide outstanding performance and instant temperature adjustments. Vintage Air Gen-V SureFit Systems feature variable blower speed and dash/floor/defrost blend. They will include everything in an evaporator kit, plus all underhood components, such as compressor, engine brackets, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware, and installation instructions. Additional features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection-molded case for optimal precision, strength, and quality * Injection-molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high performance blower * Bolt-in replacement control panel

4.5 out of 5 stars ( 10 )

$2,398.99

Redhorse Performance 302 Series PTFE Hose

Harness the power of PTFE with Redhorse Performance 302 series PTFE high performance hoses! Engineered for use with RHP's 1200 Series reusable PTFE hose ends, the 302 Series is equipped to handle extremely high-pressure and are fully compatible with all types of fuel. Select the hose diameter and length suited for your application needs. Features and specs: * Features a stainless steel weave over a custom-designed smooth bore dual-layer conductive core PTFE inner-tube that eliminates the risk of electro-static discharge * Available in precut 3 ft., 6 ft., 10 ft., 20 ft., and 50 ft. lengths * 50 ft. lengths only available in sizes -04 through -10 * NHRA accepted

5.0 out of 5 stars ( 1 )

$7.39

—

$17.75

Redhorse Performance 303 Series PTFE Hose

Redhorse Performance 303 Series PTFE hose is equipped to handle extremely high pressure and are fully compatible with all types of fuel. The hose features a stainless steel weave over a custom-designed smooth bore dual-layer conductive core PTFE inner-tube that eliminates the risk of electro-static discharge. Harness the power of PTFE with RHP's 303 Series PTFE high performance hoses! Available in a variety of diameters and lengths, select the hose application suited to your needs. Features and specs: * Available in precut 3 ft., 6 ft., 10 ft., 20 ft., and 50 ft. lengths * 50 ft. lengths only available in sizes -04 through -10 * Engineered for use with RHP 1200 Series reusable PTFE hose ends * NHRA accepted

Not Yet Reviewed

$7.02

—

$16.90

Keep It Clean Ultra Split Wrap Wire Looms

Keep It Clean Ultra split wrap wire looms are the perfect no-fuss, no-muss wire management solution. The lateral split in the tubing makes installation quick and easy—simply open the tube, wrap the harness, and close it up. The semi-rigid overlapping design of the flexible tubing ensures it will stay closed, eliminating the need for zip ties or other fasteners. These looms are made from black, durable, flexible PET, and designed to withstand the harshest conditions. Wire your ride right the first time with abrasion and cut-resistant Ultra split wrap wire loom from Keep It Clean! Features and specs: * Available in sizes ranging from 1/8 in. up to 2 in. * Resistant to 400 degrees F * Classic woven look with modern hi-tech materials * More flexible than convoluted split loom * Offered by the foot or in rolls up to 250 ft. depending on application and size ordered * Limited Lifetime Warranty

4.45 out of 5 stars ( 11 )

$5.95

Vintage Air Gen-V SureFit Systems Evaporator Kits

Get cool with Vintage Air! Their Gen 5 SureFit evaporator kits assist with providing powerful and intelligent climate control for your vehicle. These kits utilize an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments. Additionally, they include variable blower speed and dash/floor/defrost blend. Vintage Air Gen-V SureFit evaporator kits include the evaporator unit and mounting brackets, louvers (where required), duct hose wiring harness, hardware, and installation instructions, along with either a bolt-in replacement control panel or Vintage Air's patented electronic cable converters to use with your factory system controls. Choose the kit designed for your vehicle. Features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high-performance blower

4.22 out of 5 stars ( 23 )

$1,504.99

American Powertrain Tremec T-56 Magnum Manual Transmissions and Installation Kits

American Powertrain Tremec T-56 Magnum manual transmissions and installation kits are designed to withstand up to 700 lbs.-ft. of torque. Their gears feature substantially increased face widths and 2-piece laser-beam welded construction, allowing for greater control of the tooth angles, pitch, and alignment. The transmissions also include a bolstered one-piece countershaft to resist distortion, and a stronger input shaft. Magnum's new synchronizers are built with fine-tooth angles, redesigned shift forks—and an extensively modified transmission case to prevent leaks under high-stress conditions and increase overall power-handling capabilities. Nearly two dozen models are available; choose the kit recommended for your vehicle application. Kits include: * Cryo-hardened steel driveshaft slip yoke with 1330 style U-joint * Mechanical speedometer conversion * VSS wiring harness for electronic speedometer of EFI ECU * Reverse light wiring, weather seal harness, non-polar * Reverse lockout wiring harness * ISO-X ballistic, low-profile transmission mount * Steel roller pilot bearing * White shift knob with black 6-speed shift pattern

Not Yet Reviewed

$4,750.95

—

$5,025.95

Classic Instruments 1967-72 Chevy Truck Package Gauge Sets

Whether you are completing a restoration or want a new look, Classic Instruments 1962-72 Chevy truck package gauge sets are designed to fit your vintage rig. Go with a modern look or stay with a retro theme--whatever you want your dash to look like. These direct-fit dials come with the wiring harnesses and hardware to get everything working. Available in various colors and styles, select the gauge set for your project truck. Features: * Electronic quartz clock * Fuel gauge * Water temperature gauge * Oil gauge * Volts gauge

4.78 out of 5 stars ( 9 )

$1,499.95

Flaming River Programmable Keyless Ignition Column Systems

These Flaming River programmable keyless ignition systems offer more than push button starts. They have expanded their keyless ignition systems to include programmable units using RFID proximity technology. These Flaming River systems have been integrated into their awesome tilt columns in your choice of beautifully polished stainless steel, durable black powdercoat, or in a paintable mill finish to complement your custom interior. They allow you to use your already existing keyless entry/trunk release system, door poppers, or other popular remotely controlled accessories. They also have the ability to learn and recognize additional key fobs or replacement fobs, and feature an emergency bypass mode as well as a security lockout. Rev up your hot rod or classic with a new generation of Flaming River "cool"! Programmable keyless ignition systems include: * Ignition Control Module (ICM) * Two power harnesses * Accessory harness * Emergency bypass PIN card * Start button * Motion-activated RFID device * Floor shift or column shift tilt steering column

Not Yet Reviewed

$1,482.99

—

$2,156.99

Flaming River Microsteer Electric Power Assisted Steering Kits

Flaming River Microsteer electric power assisted steering kits can easily be fitted to virtually any vehicle where manual steering currently exists. There's no need to change your steering rack or fit a hydraulic system. These kits allow you to adjust the amount of assistance by using a rotary potentiometer—or you can make the system speed sensitive by connecting a wheel speed signal to the tuning box. A mode selection switch on the box allows you to choose your preferred method—manual or wheel speed. Flip the switch and make your vehicle easier to steer or boost the horsepower a bit with a Flaming River Microsteer electric power assisted steering kit. Items and notes: * Motor/gearbox unit (MGU) * Electronic control unit (ECU) * Tuning box * Wiring harness * 11/16 in.-36 input and output shafts

3.67 out of 5 stars ( 3 )

$2,554.99

—

$2,862.99

37 Results Found For "harness"