Free Shipping on Orders Over $125 at Summit Racing

EMAX Industrial Plus Silent Air Piston Compressors

EMAX Industrial Plus Silent Air piston compressors are quiet. The most common complaints about compressors are their high noise levels. EMAX Silent Air units not only still the noise, but they also do it with a big cfm output and lower rpm. Featuring their Whisper 100 system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling intake air through a series of baffle plates and prefilter media inside the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer structure; plus, it also provides secondary filtration for cleaner air. Industrial Plus Silent Air piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with a built-in fan. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. All EMAX Industrial Plus compressors have low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Their 15 Service Factor means the motors can be pulled 15 percent over full load. Depending on the application, many Silent Air piston compressors feature totally enclosed, fan-cooled (TEFC) motors that keep harmful dust and particulates out of the motor. This allows them to be used in dusty commercial and industrial environments without worrying about maintenance. They have 100 percent copper windings with pre-wired magnetic starters (necessary on any motor over 15 amps). These are high-quality, name brand, premium efficiency motors that meet all UL and CSA requirements. Some lower horsepower models are equipped with name brand, open-drip (OPD) motors. The running and starting windings on these motors are all 100 percent copper-wound for premium efficiency, reliable performance, and durability. These units also meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Plus Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * Raised-pump mounting platforms that open the underside of the crankcase to cooling air flow * Automatic belt tensioners for much easier and quicker adjustments and alignment * Selectable continuous-run or automatic start/stop operation to maximize performance and reduce wear * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Dual-timer automatic tank drains eliminate maintenance * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings

4.75 out of 5 stars ( 16 )

$4,578.90

—

$5,725.00

Howards Cams Billet Aluminum Rocker Arms

The unique full body design of these Howards Cams billet aluminum rocker arms offers less flex and will withstand 800-plus lbs. of spring pressure at over .800 in. lift. These rockers are 100 percent CNC-machined and are designed for more retainer and spring clearance than most other brands. They feature needle-bearing fulcrums and roller tips, centerless ground trunnions, centerless ground pins and rollers, and thick-walled adjusting nuts.

4.75 out of 5 stars ( 44 )

$38.99

HushMat Firewall Kits

HushMat firewall kits are created to reduce thermal transfer into your interior that comes from the engine, headers, exhaust, and catalytic converter. HushMat's proprietary visco-elastic chemistry dissipates heat, insulating your interior, causing less load on your air conditioning system to make your vehicle significantly cooler and more comfortable. Additional features and benefits include: * HushMat butyl sheets are available in stealth black or silver * Self-adhesive peel-and-stick installation (no glue required, no alcohol or acetone wash needed; no installation tools required) * Universal application (can be applied to firewall, floor pan, tunnel, doors, roof, rear wheel wells, trunk, and quarter panels) * Reduces heat and thermal transfer by over 40 percent * Lightweight and super-flexible (less than 1/8 in. thick and 0.47 lbs. per sq. ft.) * Trims easily with standard razor knife or household scissors * Stay warmer in the winter and cooler in the summer (insulates from -30 degrees up to 550+ degrees F) * Reduces road noise and vibration (low-frequency noise from 0 to 1,000 Hz) * OEM approved * Installs in half the time vs. other brands

4.5 out of 5 stars ( 6 )

$134.91

Strange Ford 9 in. HD Pro Aluminum Custom Order Assemblies

Strange Engineering has developed the iconic Ford 9 in. rear axle into an extensive line of parts and complete HD Pro aluminum custom order assemblies that take advantage of the strengths of the original, while improving on strength, performance, and flexibility. These axles consist of forged aluminum pinion supports, with a lightweight steel spool or clutch posi unit and your choice of gear ratio in a standard gear, fully assembled with yoke. The most popular rear-end around is the Ford 9 inch unit; it is used by restorers, street rodders, and racers alike, regardless of what brand of car they're restoring.

5.0 out of 5 stars ( 2 )

$1,717.99

—

$2,021.99

Heidts 1947-54 Chevy Truck Complete Chassis Kits

Heidts 1947-54 Chevy Truck Complete Chassis Kits come loaded with Heidts' Mustang II independent front suspension and 4-link rear suspension with housing and coilover shocks. The Mustang II suspension features tubular control arms, 11 in. rotors with single-piston GM calipers, stock or drop spindles, steering rack, and shocks and springs. 1947-54 Chevy truck complete chassis kit details: * Brand new 1947-54 Chevy truck frame * Complete Heidts Mustang II independent front suspension with manual rack and pinion * Tubular control arms compatible with coilover shocks * 11 in. solid iron brake rotors, with GM brake calipers and Chevy bolt pattern * Choice of front spring rate with stock shocks (300 lb., 350 lb., or 375 lb.) * Stock spindles * Sway bar * 4-link rear suspension * Rear black coilover shocks with 300 lb. coil springs * 9 in. Ford housing and 31-splin axles

5.0 out of 5 stars ( 1 )

$14,637.00

Heidts 1932 Ford Complete Chassis Kits

Heidts' 1932 Ford Complete Chassis Kits come loaded with their Superide® independent front suspension and 4-link rear suspension with housing and coilover shocks. Upgrade to the Superide II IFS with advanced geometry for the ultimate in ride quality! These kits include 11 in. rotors with Wilwood 4-piston calipers, tubular control arms, rack and pinion, adjustable coilovers, and a sway bar. 1932 Ford complete chassis kit details: * Brand new 1932 Ford frame * Tubular control arms * Front billet coilover shocks with 400 lb. coil springs * 11 in. iron rotors, Wilwood 4-piston polished calipers with Ford bolt pattern * Manual rack and pinion steering * Standard spindles * Sway bar * Triangulated rear suspension * Billet rear coilover shocks with 250 lb. coil springs * 32-40 Ford crossmember * 9 in. Ford axle housing with 31-spline axles

Not Yet Reviewed

$16,369.00

Heidts 1967-72 Chevy C-10 Complete Chassis Kits

Heidts 1967-72 Chevy C-10 Complete Chassis Kits are the best bang for your buck, if you're looking to replace and upgrade your truck frame. 1967-72 Chevy C-10 complete chassis kit details: * Brand new 1967-72 C-10 frame * Heidts 1967-72 Superide independent front suspension * 1 1/4 in. upper and 1 1/2 in. lower tubular control arms * Front billet single adjustable coilover shocks with 450 lb. coil springs * 11 in. iron rotors with black 4-piston Wilwood calipers and GM bolt pattern * Power rack and pinion steering with 20:1 ratio and 3 Turn-to-Lock * Stock spindles * Heidts 1967-72 C-10 rear 4-link suspension * Rear billet adjustable coilover shocks with 300 lb. coil springs * 64 in. track housing with weld-on brackets and 31-spline axles

Not Yet Reviewed

$20,230.00

—

$28,592.00

EMAX Industrial Piston Compressors

Offering the same quality and durability as their Industrial Plus Series (without the extra cost of some features), EMAX Industrial piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with built-in fans. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. Industrial Series compressors have name brand, open-drip (OPD), low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. With low harmonic distortion, these motors provide much higher torque in cold weather starting, and require less electricity to start. Other features include large starting and running capacitors, and dynamically balanced armatures. Running and starting windings are all copper-wound for premium efficiency, reliable performance, and durability. These motors meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX uses only taper-lock style, 2-groove pulleys with dual 2-groove, B-style belts to drive their pumps. Dual belts ensure long belt life with low vibration for smoother, quieter operation because dual belts do not have to be as tight as a single belt. Tighter belts put more load on the compressor pump and the motor bearings; that decreases the life of both. Much better than a fixed bore pulley with a set screw; the taper-lock design locks the pulley in position on the motor shaft preventing it from loosening or moving. EMAX piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * OSHA-approved, 13-gauge steel, expanded metal belt guards * ASME code-compliant tanks * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings * Big 1 3/8 in. output shafts * 15 Service Factor motors can be pulled 15 percent over full load

4.5 out of 5 stars ( 2 )

$8,394.60

American Racing VN405 Custom Torq-Thrust II Polished One-Piece Wheels

American Racing VN405 Custom Torq-Thrust II wheels deliver a timeless mag wheel look popularized in the muscle car heyday. These one-piece cast aluminum rims feature five rounded and flared spokes, stepped outer lipas, a center hub designed for exposed lugs, and a branded cap for added dimension. The beautifully polished custom retro wheels are available in a variety of widths, diameters, and other fitment options. NOTE: Each American Racing VN405 Custom wheel is a custom-made product of The Wheel Pros Custom Shop; purchases of VN405 Custom Torq-Thrust II Polished One-Piece wheels cannot be cancelled, or the wheels returned, once an order has been placed.

Not Yet Reviewed

$570.00

DiabloSport Modified PCMs

DiabloSport modified PCMs help you unlock the performance potential of your vehicle by adding horsepower, torque, and fuel economy to your ride! They feature a factory-modified powertrain control module that allows your vehicle to be tuned. Swap it with your factory-installed PCM so that you always have a backup computer—the installation only takes about 10 minutes. In addition to this modified PCM, you will need a compatible tuning device, such as a DiabloSports inTune i3 or Trinity 2 model (application dependent), in order to install a performance tune. Whether your goal is towing your boat to the lake, tackling the toughest off-road trails, or beating your best time down the track, level up with the DiabloSport modified PCM best suited for your ride!

5.0 out of 5 stars ( 2 )

$972.95

—

$1,449.95

10 Results Found For "brand"