Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
118 Results Found For "bearings"
Crower Rocker Arm Roller Tip Bearings
Crower rocker arm roller tip bearings are the perfect upgrade for your Crower roller tip stainless steel roller rocker arms. They include the pin, bearing, and washers to complete the installation.
Not Yet Reviewed
$307.99
Strange Differential Carrier Bearings
These Strange differential carrier bearings are designed to fit the Strange carriers.
( 13 )
$169.99
Strange Pro Race Custom Axle Packages
With Strange Pro Race custom axles, your set-up is optimized for drag racing! They're manufactured from Hy-Tuf, an ultra-strength alloy that—when combined with a thru-hardened heat-treat—achieves superior torsional strength and ductility. Strange Pro Race packages are available with bearing, studs, retainer plates, or eliminator kits. You can also get the axles alone to accommodate your application. For maximum torsional strength and winning performance, start your spec sheet with Strange Pro Race custom axles. Many Pro Race custom axles and packages offer: * Forged from low-carbon, high-manganese, high-nickel, and high-molybdenum steel * Majority of machining performed before heat-treat to provide consistent hardness * Thru-hardened to Rc 45-48 to maximize the material's torsional strength * Finish machined after heat-treat to ensure accuracy * Choice of lengths * Choice of bolt circle * Forged in the USA * Designed and machined by Strange Engineering
( 7 )
$594.99
—
$942.99
Inland Empire Driveline High-Strength Custom Order Driveshafts
Big power and lots of traction can twist your stock driveshaft into pieces, so replace it with something better, such as these Inland Empire Driveline high-strength custom order driveshaft assemblies. The 3.5 in. diameter tubes are custom-drawn for consistent strength, and the forged yokes are welded on using state-of-the-art processes for improved reliability. A specification sheet must be filled out prior to ordering. Please call us at 1-800-230-3030 for further information.
( 15 )
$943.80
Strange Custom S/S and S/T Axles
These Strange S/S axles are designed to meet the demanding bending loads of street use. They are manufactured by Strange from modified 1550 steel. After extensive research and testing, Strange determined that 1550 steel, in conjunction with specified percentages of additional elements, creates the basis for the strongest induction-hardened axles available. Call 1-800-230-3030 for more information.
( 5 )
$537.99
—
$784.99
Strange Double Externally Adjustable Aluminum Coilover Shocks
Strange double adjustable aluminum coilover shocks feature two knobs for multiple adjustment options. One knob controls shock extension, and the other accurately adjusts compression. Crafted from fully machined high-grade aluminum, Strange fully assembles and inspects each of their double adjustable aluminum coilover shocks to assure the ultimate in performance.
( 1 )
$694.99
—
$731.99
Strange Ford 9 in. Lightweight Aluminum Center Sections
Strange Ford 9 in. lightweight aluminum center sections will give you the perfect foundation for a high-quality, bulletproof rear differential. They feature a fully assembled aluminum case with a full spool, forged aluminum pinion support, S-series yoke, and ring and pinion set. A specification sheet is required to be filled out prior to ordering.
( 2 )
$1,648.99
—
$2,270.99
Zumbrota Remanufactured Manual Transmissions
Zumbrota remanufactured manual transmissions are some of the most dependable 5-speed, 6-speed, and transaxle units available. Each transmission is put through tremendous testing and inspections to assure the highest quality possible to use in your vehicle. Benefits of Zumbrota remanufactured manual transmissions include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All housing and top covers are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent inspection of internal parts, including gear wear checks, main shaft straightness test and synchronizer testing * 100 percent replacement of seals, bearings, and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty
( 21 )
$1,157.99
—
$7,012.99
On Sale
Ranger 1 Ton TransJaks
When you need to lift a ton of weight, Ranger 1 ton TransJaks are the professional's choice. These powerful, multi-tasking--and very reliable--lift systems are essential to repair and service any drivetrain component. Ranger TransJaks offer maximum durability with heavy-steel construction, friction-minimizing steel roller bearings, and an extra-wide base with four heavy-duty swivel ball bearing casters that provide a low center of gravity and exceptional maneuverability. Plus, they're fitted with heavy-duty chain anchors and a failsafe overload system so you can feel secure--even with all of that metal up in the air. TransJaks from Ranger have everything you need to tackle large stuff, yet they're convenient and mobile enough for smaller jobs. More TransJaks features include: * Foot-operated pump * 2-stage design * Adjustable saddle tilts two ways and slides the other two directions * Hardened chromoly ram * Double-sealed hydraulics to prevent contamination for longer service life * Fully adjustable universal saddle adapts to passenger car and light truck automatic transmissions and transaxle assemblies * Fine-thread adjustment screws with oversized knobs make adjusting the table a cinch * 2-stage design provides an extended lifting height of over 73 in. * Two individual push/pull handles for extra handling capability
( 14 )
$1,050.00
$975.00
American Powertrain ProFit Tremec TKX Manual Transmission and Installation Kits
American Powertrain ProFit Tremec TKX manual transmissions and installation kits put the power to the pavement with unmatched durability and versatility. Tremec has normally sourced their aftermarket transmissions from the OE side, such as the Magnum T-56 and the T-5, but this new design is made from the ground up as a strictly aftermarket transmission. Designed to fit classic muscle cars and customs, the TKX has a tighter, more streamlined case, and features 600 lbs.-ft. of torque capacity and are capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. The compact design provides clearance in most transmission tunnels without floor modifications, while case strength has increased from previous models with the new 3-piece aluminum housing and gaskets at all flanges simplifies installation and eliminates fluid leaks. Additional features include: * Designed with your specific vehicle application in mind * Available with multiple gear ratio configurations for compatibility for multiple applications with three shifter locations * Multi-cone synchronizers and synchronizer rings are made of sintered bronze and carbon for superior shifts * All gears are supported by caged needle bearings to reduce end play * Gears and shafts are made from ASTM 4615 grade steel and provide increased torque carrying capacity * TKX manual transmissions have 31-spline output shafts for added strength, built-in reverse light switches, and cruise control safety switches * The TKX also has separate GM and Ford case patterns and input configurations—with integrated GM and Ford transmission mount patterns * Installation kits include a driveshaft slip yoke made from cryogenically hardened steel, a polyurethane transmission mount, a steel roller pilot bearing, and a reverse light wiring harness
( 1 )
$4,395.00
—
$4,485.95
American Powertrain Tremec T-56 Magnum Manual Transmissions and Installation Kits
American Powertrain Tremec T-56 Magnum manual transmissions and installation kits are designed to withstand up to 700 lbs.-ft. of torque. Their gears feature substantially increased face widths and 2-piece laser-beam welded construction, allowing for greater control of the tooth angles, pitch, and alignment. The transmissions also include a bolstered one-piece countershaft to resist distortion, and a stronger input shaft. Magnum's new synchronizers are built with fine-tooth angles, redesigned shift forks—and an extensively modified transmission case to prevent leaks under high-stress conditions and increase overall power-handling capabilities. Nearly two dozen models are available; choose the kit recommended for your vehicle application. Kits include: * Cryo-hardened steel driveshaft slip yoke with 1330 style U-joint * Mechanical speedometer conversion * VSS wiring harness for electronic speedometer of EFI ECU * Reverse light wiring, weather seal harness, non-polar * Reverse lockout wiring harness * ISO-X ballistic, low-profile transmission mount * Steel roller pilot bearing * White shift knob with black 6-speed shift pattern
Not Yet Reviewed
$4,750.95
—
$5,025.95
TCI PRO-X Torque Converters
These TCI PRO-X torque converters are designed specifically for Top Sportsman, Top Dragster, and Outlaw Street Car classes. Able to handle 2,500+ hp applications (including multi-stage, nitrous-assisted, supercharged, and twin turbocharged engines), these high-strength torque converters feature a TCI exclusive--HDT (Heat Dissipating Technology) Coating--further enhancing their ability to deliver unsurpassed consistency and durability. Features include: * Hand-built steel stator * Forged mounting cover * 3 sets of heavy-duty internal bearings * Furnace-brazed turbine and pump assembly * Built for GM, Ford, and Chrysler transmissions * 4 or 6-bolt flanges and optional billet front available
Not Yet Reviewed
$1,794.95
Eddie Motorsports Billet Hood Hinges
Eddie Motorsports billet hood hinges are CNC-machined to perfection from high-quality 6061 T-6 billet aluminum. They provide a stunning alternative to your vehicle's unsightly stock stamped steel hinges and springs. These hinges are enhanced by the included nitrogen-filled gas struts and sealed bearings. Eddie Motorsports billet replacements give your hood outstanding stability and flawless operation that is simply not possible with 40- or 50-year-old stock hinges. The gas struts are made of the highest quality stainless steel for years of uncompromised performance. The struts are available in varying strengths to accommodate all types of hoods--including steel, fiberglass, and carbon fiber.
( 136 )
$589.95
—
$820.95
TCI Competition Torque Converters
TCI Competition torque converters are proven race winners and an excellent choice for stock and Super Stock cars. They work well with both big and small blocks, producing power between 4,500 and 7,000 rpm. You'll maintain engine rpm between shifts with their efficient design, and gain improved reliability with an oversize caged bearing supporting a new stator. ETs are more consistent and reaction times faster as a result of a stronger housing, which resists flexing and ballooning.
( 9 )
$1,489.95
—
$1,914.95
Boss Hog Street Bandit Torque Converters
Torque converters are considered one of the most mysterious mechanical components in today's vehicles. They function like a clutch, and keep the engine running even when the vehicle comes to a halt. By designing the stall speed to match both the engine and desired stall speed, ACC Performance converters help low-end idle speeds, improve performance, and acceleration. ACC Performance Products has emerged as an out-right leader in torque converters and here's why: * Boss Hogs are welded, not furnace-brazed; furnace brazing is not the best way to adhere torque converter components, it will erode and ruin the stators and all rotating parts * Industrial Torrington bearings handle more torque than smaller, uncased needle bearings * Aircraft aluminum washers instead of fiber washers put more horsepower and torque directly to the ground * ACC converters are hand-built and tested to ensure that you get the best converter money can buy * With returns below one percent, you are assured of the highest quality parts available * Street Bandit converters are designed to handle as much as 650 hp * Custom-engineered turbine hubs maintain the highest quality, strength, and durability * Stators are built with high-flow vents and channels for greater cooling to handle greater power and higher temperatures * Engineered with a single bolt pattern that makes ACC converters surprisingly light to free up your motor and allow it to gain rpm quicker Notes: * Boss Hog Street Bandit torque converters are not designed to handle the extreme shock and abuse of nitrous oxide or trans-brakes * It is imperative that a transmission cooler be added with any torque converter that is rated over stock stall speed
( 104 )
$609.90
Heidts Mustang II Front Suspension Kits
Get your street rod up and rolling and improve your vehicle's suspension, handling, and performance with one of these Heidts Mustang II front suspension kits. Kits include: * Crossmember * Tubular upper and lower full A-frame style control arms * 11 in. diameter brake rotors * Bearings * Seals * Shocks * Springs * Stock-type spindles * Manual rack and pinion mounted to the front of the crossmember for additional engine clearance * Outer tie rod ends * Rubber spring cushions * Spindle nuts * All necessary mounting hardware
( 5 )
$2,700.00
Zumbrota Remanufactured Axle Assemblies
Zumbrota Drivetrain remanufactured axle assembles offer reliable performance at a value price. They're available for thousands of applications—from passenger and off-road vehicles, to race cars and pulling trucks. The axle tubes are straightened to OE specifications; the housings are hydro-blasted and rinsed, then tested for surface wear and cracks; and the gear patterns and rolling torque are properly adjusted to ensure optimum tooth contact. Zumbrota replaces all seals, bearings, crush sleeves, pinion nuts, and shims on the front and/or rear axle assemblies. Order the replacement model recommended for your specific vehicle.
( 9 )
$994.99
—
$5,696.99
Zumbrota Remanufactured Transfer Cases
Zumbrota remanufactured transfer cases are put through a proprietary cleaning method, and arrive looking like new. But before they ship, each unit goes through complete inspection, component replacement, and quality control process to assure dependable, reliable shift-ability. Zumbrota rebuilds units from New Process, Borg Warner, and other major manufacturers to fill fitments for foreign and domestic passenger cars, trucks, and SUVs. Benefits of Zumbrota remanufactured transfer cases include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All cases are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent replacement of seals, bearings, viscous couplers (when applicable), and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty
( 7 )
$853.99
—
$3,852.89
Trend Pushrods H-13 Series Wrist Pins
Trend Pushrods offers replacement H-13 Series wrist pins in a variety of sizes. These components connect the piston to the connecting rod and provide a bearing for the connecting rod to pivot upon as the piston moves. They are machined from tool steel for maximum strength.
Not Yet Reviewed
$34.52
—
$35.00
Trail-Gear Trail-Creeper Dual Transfer Cases
Trail-Gear Trail-Creeper dual transfer cases will give you ultimate gear selection and greatly increase the oil flowing in and around the adapter for cooler operation. They have increased the strength of the casting by making thicker walls and creating huge, oversized gussets. The special retainer ring securely stabilizes the main bearing to prevent bearing play, and the tight tolerances on the coupler ensure long life and prevent striped-out input gears. You won't regret this mod--it's easy to install with basic tools and mechanical abilities.
( 1 )
$3,699.99
Hughes Performance Street/Strip 35 Series Torque Converters
If you've got a daily driver that you race on the weekends, and are in need of an excellent torque converter, then look no further. Hughes street/strip 35 Series torque converters are perfect for weekend racing and high performance street use. These converters are brazed and feature a strengthened sprag, special cut stator, and full needle bearings on the front and rear. Whether you're cruisin' down the highway or flying down the track, these converters get the job done.
( 4 )
$1,070.99
—
$1,087.99
Stifflers Suspension Ridetech HQ Coilover Shock Kits
Stifflers Suspension Ridetech HQ Series coilover shocks are specifically designed as bolt-in kits for use with Stifflers lower control arms (sold separately), providing superior ride quality and handling to your F150. These kits include coilover shocks, springs, and all necessary hardware to facilitate the installation. Additional features of Ridetech HQ Series shocks: * Monotube design allows for superior ride and handling * One-piece impact forged body with hard coat external anodizing * Hardened shaft * Adjuster knob allows 26 clicks of rebound adjustment * External and internal bump stops built-in * Billet end cap with integrated debris wiper to prevent seal damage * PTFE piston wiper and progressive valving allow consistent piston/bore contact and repeatable performance * Housing bore is cathode anodized for years of wear resistance * Long-lasting Kevlar® lined bearings allow wide articulation with low noise * Lower control arm (FLCA-FT02) not included Note: One of the most critical factors is matching the correct stroke shock to your desired ride height.
Not Yet Reviewed
$779.95
EMAX Industrial Plus Silent Air Piston Compressors
EMAX Industrial Plus Silent Air piston compressors are quiet. The most common complaints about compressors are their high noise levels. EMAX Silent Air units not only still the noise, but they also do it with a big cfm output and lower rpm. Featuring their Whisper 100 system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling intake air through a series of baffle plates and prefilter media inside the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer structure; plus, it also provides secondary filtration for cleaner air. Industrial Plus Silent Air piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with a built-in fan. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. All EMAX Industrial Plus compressors have low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Their 15 Service Factor means the motors can be pulled 15 percent over full load. Depending on the application, many Silent Air piston compressors feature totally enclosed, fan-cooled (TEFC) motors that keep harmful dust and particulates out of the motor. This allows them to be used in dusty commercial and industrial environments without worrying about maintenance. They have 100 percent copper windings with pre-wired magnetic starters (necessary on any motor over 15 amps). These are high-quality, name brand, premium efficiency motors that meet all UL and CSA requirements. Some lower horsepower models are equipped with name brand, open-drip (OPD) motors. The running and starting windings on these motors are all 100 percent copper-wound for premium efficiency, reliable performance, and durability. These units also meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Plus Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * Raised-pump mounting platforms that open the underside of the crankcase to cooling air flow * Automatic belt tensioners for much easier and quicker adjustments and alignment * Selectable continuous-run or automatic start/stop operation to maximize performance and reduce wear * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Dual-timer automatic tank drains eliminate maintenance * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings
( 16 )
$4,578.90
—
$5,725.00
Boss Hog Night Stalker Torque Converters
Boss Hog Night Stalker Series torque converters can take you from towing to rock crawling. They're offered in four levels to perfect your performance needs and designed to handle as much as 500 hp. The Boss Hogs use Torrington-style incased bearings throughout, and ACC Performance four-corner tack welds the turbine and impeller fins to maintain strength and quality. From stock to mildly modified vehicles, the Stalker Series torque converters offer performance that is tough and reliable. Over a hundred models are available; order the converter recommended for your transmission application.
( 138 )
$474.66
—
$552.97
