Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
131 Results Found For "air"
Vintage Air Gen-V SureFit Systems Complete Kits
Vintage Air Gen-V SureFit Systems complete kits are powerful and intelligent climate control systems. Available for vehicles with or without factory air, they use an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and-fin cooling coils provide outstanding performance and instant temperature adjustments. Vintage Air Gen-V SureFit Systems feature variable blower speed and dash/floor/defrost blend. They will include everything in an evaporator kit, plus all underhood components, such as compressor, engine brackets, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware, and installation instructions. Additional features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection-molded case for optimal precision, strength, and quality * Injection-molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high performance blower * Bolt-in replacement control panel
( 8 )
$2,276.99
—
$2,858.99
Vintage Air E-Z Clip Air Conditioning Hose
Vintage Air E-Z Clip air conditioning hose is the cool way to plumb your ride! Offered in three sizes, this smaller diameter hose (compared to standard hose) allows for tighter turns and neater routing. E-Z Clip hose is lightweight but rugged and you can assemble, route, and crimp in your own garage. Fabricating a custom plumb job just got easier with Vintage Air E-Z Clip air conditioning hose.
( 6 )
$4.99
—
$6.99
EMAX Industrial Plus Silent Air Piston Compressors
EMAX Industrial Plus Silent Air piston compressors are quiet. The most common complaints about compressors are their high noise levels. EMAX Silent Air units not only still the noise, but they also do it with a big cfm output and lower rpm. Featuring their Whisper 100 system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling intake air through a series of baffle plates and prefilter media inside the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer structure; plus, it also provides secondary filtration for cleaner air. Industrial Plus Silent Air piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with a built-in fan. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. All EMAX Industrial Plus compressors have low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Their 15 Service Factor means the motors can be pulled 15 percent over full load. Depending on the application, many Silent Air piston compressors feature totally enclosed, fan-cooled (TEFC) motors that keep harmful dust and particulates out of the motor. This allows them to be used in dusty commercial and industrial environments without worrying about maintenance. They have 100 percent copper windings with pre-wired magnetic starters (necessary on any motor over 15 amps). These are high-quality, name brand, premium efficiency motors that meet all UL and CSA requirements. Some lower horsepower models are equipped with name brand, open-drip (OPD) motors. The running and starting windings on these motors are all 100 percent copper-wound for premium efficiency, reliable performance, and durability. These units also meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Plus Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * Raised-pump mounting platforms that open the underside of the crankcase to cooling air flow * Automatic belt tensioners for much easier and quicker adjustments and alignment * Selectable continuous-run or automatic start/stop operation to maximize performance and reduce wear * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Dual-timer automatic tank drains eliminate maintenance * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings
( 16 )
$4,578.90
—
$5,725.00
Vintage Air Gen-IV SureFit Systems Complete Kits
Ditch the cables for the totally cool Vintage Air Gen-IV SureFit Systems complete kits. These fly-by-wire systems are fully electronic servo motor controls--there are no cables or capillary tubes to route. Gen-IV systems are model-specific and offer climate-control technology for real-deal, bi-level airflow and "just right" temperature air blending. Vintage Air SureFit Gen-IV all-in-one systems are delivered with an evaporator kit, a condenser and drier package, brackets, mounting hardware, and instructions for a professional finish that maintains your car's value and cool looks. Chill your classic car the electronic way with Vintage Air Gen-IV SureFit Systems complete kits.
Not Yet Reviewed
$2,329.99
—
$2,556.99
Vintage Air Heritage Series Underdash Systems
If you've been searching for the right underdash-style evaporator, look no further. These Vintage Air Heritage Series underdash evaporator kits are available with three different bezels to complement any vehicle's interior theme, making them a great choice for your hot rod, street rod, or truck. The bezel choices include engine-turned aluminum, brushed aluminum, and mother of pearl. The Vintage Air Heritage Series underdash evaporator kits are available in both cool only and heat/cool configurations.
( 5 )
$1,582.99
Vintage Air Gen-V Magnum Max SureFit Systems Complete Kits
Vintage Air Gen-V Magnum Max SureFit Systems climate control complete kits offer powerful and technologically advanced control. They employ an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate, state-of-the-art, high-density aluminum heat exchangers pack the maximum possible performance and reliability within the confines of your dash. Each complete kit includes everything from the evaporator kit with Magnum Max blower, plus all under-hood components, such as the compressor and bracket, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware, and detailed installation instructions. Select the Vintage Air Gen-V Magnum Max SureFit complete kit designed for your vehicle. Features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength, and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * New electronic control panel included * Stamped firewall cover assembly * Quiet high performance blower
Not Yet Reviewed
$2,609.99
EMAX Industrial Piston Compressors
Offering the same quality and durability as their Industrial Plus Series (without the extra cost of some features), EMAX Industrial piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with built-in fans. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. Industrial Series compressors have name brand, open-drip (OPD), low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. With low harmonic distortion, these motors provide much higher torque in cold weather starting, and require less electricity to start. Other features include large starting and running capacitors, and dynamically balanced armatures. Running and starting windings are all copper-wound for premium efficiency, reliable performance, and durability. These motors meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX uses only taper-lock style, 2-groove pulleys with dual 2-groove, B-style belts to drive their pumps. Dual belts ensure long belt life with low vibration for smoother, quieter operation because dual belts do not have to be as tight as a single belt. Tighter belts put more load on the compressor pump and the motor bearings; that decreases the life of both. Much better than a fixed bore pulley with a set screw; the taper-lock design locks the pulley in position on the motor shaft preventing it from loosening or moving. EMAX piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * OSHA-approved, 13-gauge steel, expanded metal belt guards * ASME code-compliant tanks * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings * Big 1 3/8 in. output shafts * 15 Service Factor motors can be pulled 15 percent over full load
( 2 )
$8,394.60
Aeroquip Performance Multi-Refrigerant Hoses
Aeroquip Performance multi-refrigerant hose features multiple layers that deliver extended service performance and superior flexibility, helping them exceed SAE J2064 ratings with excellent effusion and moisture resistance. For routing ease, vibration absorption, sound deadening, and the ability to accommodate the movement of connected components, order the Aeroquip Performance multi-refrigerant hose designed for your street or strip needs. More product features include: * Internal nylon (polyamide) veneer * Synthetic-rubber backing layer * Braided outer layer providing reinforcement * Rubber (chlorobutyl) cover
( 1 )
$11.99
—
$12.99
Vintage Air Stainless Steel Refrigerant Lines
Vintage Air stainless steel refrigerant lines are designed and produced by experienced street rodders who have been involved in the sport for over 30 years. Vintage Air offers the most comprehensive line of high performance air conditioning components available. Every Vintage Air product incorporates the very latest technology and offers you the greatest efficiency and reliability available. So, when you're cruising in your beautiful classic car on a hot summer day, keep it cool with a Vintage Air stainless steel refrigerant lines kit.
Not Yet Reviewed
$11.99
Vintage Air Evaporator Drain Hoses
Vintage Air evaporator drain hoses will help you make repairs to a leaking A/C system on your vehicle and get the cool air flowing once again. Over time, the factory drain hose which attaches to the bottom of the evaporator core outlet case can become damaged or missing. Be sure to equip yourself with a spare replacement before the inevitable winds up happening to you.
Not Yet Reviewed
$0.75
Nitrous Express Stage II Water/Methanol Injection Systems
You'd be crazy to throw water into a gas tank and expect to get anywhere—but power and torque can be increased if you inject it into the incoming air charge with Nitrous Express water/methanol injection systems. Cooling the air charge allows for increased timing and the resulting performance benefits. These versatile units have a wide-open throttle switch for naturally aspirated vehicles and an adjustable boost-activated switch for forced induction models. Nitrous Express systems inject a fixed amount of fluid when the WOT switch or boost is activated—and continues until the switch opens again. They reduce intake temperatures and the need for timing retard when used with nitrous. Stage II kits come complete with a high-output pump, 3 qt. reservoir, nozzle, boost activated progressive controller, switch, hardware, and detailed instructions. Water has always been used to cool down motors, but with Nitrous Express water/methanol injection systems … it'll be heating things up!
Not Yet Reviewed
$3,398.40
Magnuson Magnum TVS2300 Supercharger Kits
Magnuson Magnum TVS2300 supercharger is designed to deliver maximum performance while retaining factory-like drivability and reliability. Generating 6 psi of boost, the Magnuson TVS2300 Hybrid Roots Style Supercharger delivers power gains of approximately 120 horsepower and 120 foot-pounds of torque at the rear wheels! But peak horsepower and torque numbers don't tell the whole story. "Under the curve" power is significantly enhanced delivering near instantaneous boost and torque upon demand that really pins you back in your seat. Inside of the supercharger manifold, a large liquid-to-air intercooler keeps your Intake Air Temperatures in check and provides consistent and repeatable performance. Combine that with the front-mounted heat exchanger, electric water pump, and intercooler coolant reservoir and you have a supercharger system with IATs that are typically only 20-40 degrees Fahrenheit over the ambient temperature. Maximizing your efficiency during cruising is the job of the supercharger's integrated bypass valve. This vacuum operated system allows air to bypass the supercharger and the rotors to "free spin" under light engine loads. During this situation the parasitic loss of the supercharger system is essentially negated, taking less than one-third of a horsepower to turn the rotors. This bypass valve also allows your supercharged vehicle to maintain stock-like derivability and fuel economy - giving you a package that delivers power without compromise.
( 4 )
$7,595.00
—
$8,195.00
Classic Performance Complete Fuel Injection-Ready Tank Kits
Classic Performance complete fuel injection-ready tank kits are the most complete choice when adding a fuel injection-ready tank to your vehicle. They include an original-fit tank with built-in fuel tray, a fuel tank sending unit, and a fuel regulator/filter combined with the most comprehensive EFI fuel line kit in the market that's packaged with the fuel hoses and all the fittings to plumb from the fuel pump forward. All fuel fittings have a push-lock connect end that does not require specialty tools to disassemble. CPP tank kits also include a 255 lph in-tank pump that supports up to 600 hp, or an upgraded high-volume pump option with the proper install components. In-tank pumps are much more efficient and run much cooler than running an inline pump. Classic Performance kits contain all of the necessary pieces to mount to your vehicle for a simple upgrade install.
( 2 )
$613.99
—
$673.99
ProCharger P-1X Stage II Supercharger Systems
ProCharger P-1X Stage II supercharger systems feature the more efficient P-1X head units to reach an even higher level of performance. With highly effective intercoolers, programmer, and additional components, these complete kits will deliver more power per psi, more maximum horsepower, and the coolest charge air temperatures. The installation is straightforward with the finished product providing an outstanding OEM-quality appearance. Cooler air means more power, and ProCharger P-1X Stage II supercharger systems deliver thermal advantages for incredible, real-world power.
( 1 )
$8,748.00
—
$10,903.00
ProCharger P-1SC-1 High Output Supercharger Systems
ProCharger P-1SC-1 High Output supercharger kits are absolutely the most powerful and reliable supercharger systems offered for your vehicle. For street use or at the track, they'll deliver the largest increase in horsepower and torque available from any supercharger system. The extremely low-charge air temperatures provide much better engine longevity by protecting your motor from detonation. The supercharger kits are designed with a fundamental understanding of the physics behind supercharging and are engineered to the highest quality standards. By using CNC machining and nearly indestructible 7075 T-6 aircraft aluminum to produce the largest and strongest impellers in the industry, they're able to again improve both performance and reliability. The P-1SC-1 High Output kits are the only centrifugal superchargers to incorporate billet impellers in production models. Hundreds of models are available to ensure precise fitment on your vehicle. Select the ProCharger system and options tailored for your year/make/model.
Not Yet Reviewed
$6,698.00
—
$17,998.00
Magnuson Radix TVS1900 Supercharger Kits
Down to the smallest part, the Magnuson line of TVS1900 bolt-on supercharger systems are engineered as a complete package. The supercharger, supercharger intake manifold, inlet, pulley, fuel injectors, fuel rails, front & rear fuel crossovers, and intercooler come pre-assembled to make installation simple and easy while the accessory box is organized into individual sub-assemblies to help ensure that you don't lose track of parts in the middle of your installation. All the hardware needed for a full and complete installation is also included so you won't be running to the local parts store in the middle of your installation. In addition, our full color, step-by-step installation manuals will walk you through the install process with exact attention to detail. Magnuson's TVS1900 superchargers utilize EATON's latest 6th Generation supercharger rotor technology found in such industry leading performance vehicles as the Corvette ZR-1, the Cadillac CTS-V, and the 2013 Mustang GT500. These Twin Vortices Series superchargers feature a pair of four-lobe, high-helix rotors with 160-degrees of overall twist that are housed in Magnuson's patented high-flow housing. This highly efficient package requires less power to drive, delivers cooler discharge temperatures, and is much quieter than many of its competitors. These superchargers are all manufactured in their TS16949 certified facility – the highest ISO OEM quality certification standard in the market.
( 5 )
$7,395.00
The Detail Zone Telorvek Ford 4.6/5.4 V8 Modular EFI Wiring Harnesses
The Detail Zone puts you in control of your Ford wiring job with their Telorvek Ford 4.6/5.4 V8 Modular EFI wiring harnesses. Your 4.6 or 5.4 V8 Modular-powered ride will run like factory with these TDZ fully functional, closed-loop, fully scannable wiring systems. Installation starts with the Telorvek panels--your centrally located link between your engine sensors and computer. Detail Zone supplies all of the correct and necessary connections, terminals, and 20 ft. of fire-resistant wire--no predetermined wire lengths! Not only will you have plenty of length, but all wires are printed with sensor and terminal information, so there's no guessing which is which or where it goes! You'll have no more long hours spent tracing circuits, cutting, or soldering. The Telorvek panel is capable of being used as a breakout box required for diagnostic procedures to take voltage readings of different circuits. Take control of your project for a guess-free install and a trouble-free start-up with The Detail Zone Telorvek Ford 4.6/5.4 V8 Modular EFI wiring harnesses.
( 3 )
$1,131.85
—
$1,283.75
ProCharger P-1SC-1 Supercharger Kits
ProCharger P-1SC-1 supercharger kits are absolutely the most powerful and reliable supercharger systems offered for your vehicle. For street use or at the track, they'll deliver the largest increase in horsepower and torque available from any supercharger system. Their extremely low-charge air temperatures provide much better engine longevity by protecting your motor from detonation. These supercharger kits are designed with a fundamental understanding of the physics behind supercharging and are engineered to the highest quality standards. By using CNC machining and nearly indestructible 7075 T-6 aircraft aluminum to produce the largest and strongest impellers in the industry, they're able to again improve both performance and reliability. The P-1SC-1 kits are the only centrifugal superchargers to incorporate billet impellers in production models. Hundreds of models are available to ensure precise fitment on your vehicle. Select the ProCharger system and options tailored for your application.
( 9 )
$7,398.00
—
$10,008.00
ProCharger P-1X High Output Supercharger Systems
ProCharger P-1X high-output supercharger head units feature the robust, self-contained gearcase that is standard on most ProCharger models, but with a new aerodynamic compressor design. They create cooler-charge air temperatures and more horsepower at the same boost level and step-up ratio as their industry-standard supercharger kits (P-1SC-1 and D-1SC). This higher efficiency design is engineered to be a bolt-in replacement for both of those—they fit in the same brackets—and offers greater maximum-power potential. The compressor side of these superchargers (the volute and impeller) was redesigned with greater efficiency and less parasitic engine load in mind. This produces less heat and power needed to spin the impeller—and that adds up to more horsepower. Bolt-on some of the largest street-legal power gains available with a ProCharger P-1X high-output supercharger system. Additional features: * 10-15 flywheel horsepower gain on otherwise stock, modern V8 automotive engines at the same boost level and pulley size (versus P-1SC-1 models) * Larger gains possible at the same boost level with built and modified motors * 875-plus horsepower-capable * Designed for today's high-flowing modern V8 engines producing 300-plus naturally-aspirated horsepower * Available as optional upgrade with ProCharger systems and tuner kits * Highly-durable, high-horsepower designs with a compact, state-of-the-art 9.0 in. housing/volute * Available with standard or reduced-noise level * Slightly larger volutes than P-1SC-1/D-1SC models
Not Yet Reviewed
$8,558.00
—
$9,783.00
Dart Single Plane Intake Manifolds
Using airflow technology developed on NASCAR and NHRA engines, Dart single plane intake manifolds flow up to 10 percent more air than comparable intakes. These single-plane, air-gap style manifolds have a raised water crossover to insulate incoming air, optimized intake-runner cross sections to maintain high mixture velocity, and extended runner dividers to equalize port lengths. Dart also incorporated integral nitrous bosses on these manifolds, for those wanting even more power.
( 1 )
$834.05
—
$947.78
Willy's Carburetor & Dyno Shop 500 CFM 2BBL Carburetors
Willy's Carburetor & Dyno Shop 500 cfm 2-barrel carburetors feature 1 3/8 in. venturis and a 1 11/16 in. throttle plate. These carburetors will pass tech gauges and produce awesome torque and horsepower. Willy's Carburetor & Dyno Shop 500 cfm 2-barrel carburetors are popular on NASCAR late models and are IMCA and WISSOTA-legal.
( 2 )
$744.99
—
$1,088.99
ProCharger P-1SC-1 Stage II Supercharger Systems
ProCharger P-1SC-1 Stage II supercharger systems deliver larger power gains, coolest charge air temperatures, and the greatest reliability. Thanks to many years of forced induction engineering and innovation, ProCharger technology offers extremely low charge air temperatures, that also provides much better engine longevity by protecting your motor from detonation. The P-1SC-1 Stage II supercharger systems are complete kits with their most-advanced, quiet, and self-lubricating superchargers, highly effective and larger air-to-air intercoolers, handheld programmer, and other components that create an attractive, OEM-quality installation. Cooler air makes more power, and ProCharger P-1SC-1 Stage II intercooled systems supply lots of it to increase horsepower and performance.
( 1 )
$7,148.00
—
$11,473.00
AED Max-Pro Drag Racing Carburetors
Max-Pro drag racing carburetors are AED's finest pieces, custom-tailored for your specific application to achieve high flow rates without losing acceleration or torque. AED uses a specific set of parameters—engine size, rpm range, and power level—to calibrate venturi and metering sizing and properly size throttle bore and fuel circuits. They will increase strength and fuel atomization to produce more torque and power over a wider rpm range than previously obtained. AED Max-Pro carburetors boast fully CNC-machined, centered, ported main bodies, and custom-machined boosters; the completed carburetors are then "wet-flow" tested to ensure top performance. Applying additional information that you provide, AED fine-tunes your selection for a custom fit for your machine. AED Max-Pro drag racing carburetors are available in 4150 and Dominator versions, with the latter serving big-inch engines running either alcohol or E85. Whether you're a professional racer or an inspired amateur, AED will help you to obtain the proper carburetor to make your runs successful.
Not Yet Reviewed
$1,319.99
—
$1,699.99
AED Super-Mod Series Carburetors
AED Super-Mod Series carburetors are custom-tailored for your specific application to keep you first off of the line. AED uses a specific set of parameters—engine size, rpm range, and power level—to calibrate venturi and metering sizing and properly size throttle bore and fuel circuits for maximum airflow, response, and power. AED Super-Mod Series throttle bores are fully CNC-ported, all corners are balanced, and the completed carburetors are then "wet-flow" tested to ensure top performance. Applying additional information that you provide, AED fine-tunes your selection for a custom fit for your machine. Whether you're a professional racer or an inspired amateur, AED will help you to obtain the proper carburetor to keep your runs successful.
Not Yet Reviewed
$979.99
—
$1,079.99
