Availability
11 Results Found For "Wilwood"
Wilwood Master Cylinder Remote Reservoir Hoses
Wilwood master cylinder remote reservoir hoses are designed to connect your master brake cylinder to the Wilwood remote-mount reservoirs. They're manufactured from high-quality rubber and are available in different lengths and diameters to fit your brake application.
( 10 )
$1.99
Scott's Hot Rods IFS Packages
Scott's Hot Rods IFS packages are the ultimate improvement to the ride quality and handling of your classic vehicle. Starting with a ground-up, clean-sheet design, these independent front suspension kits are custom-fit to your specific chassis. Optimized steering and suspension geometry provide modern handling, while adding the convenience and feedback of rack-and-pinion steering. Designed and fabricated in-house ensures precise, accurate fitment. These IFS packages are available in a wide array of ride heights, suspension options, brake configurations, and even wheel bolt patterns! Features include: * Stock, mild, or low ride height configurations * One-piece, boxed steel crossmember construction * Frame/chassis-specific frame notches and reinforcement plates * Fully adjustable, tubular upper and lower control arms * Oversized serviceable ball joints * Built-in anti-dive geometry * Rack and pinion steering * Forged steel spindles (stock or drop-height options) * Available with Wilwood brake packages in multiple color choices * Available air bag and multi-level coilover suspension options
( 4 )
$3,385.99
—
$5,397.99
Heidts Pro-G Independent Rear Suspension Kits
Heidts Pro-G IRS suspension kits are designed to bring the superior ride and handling of independent rear suspension to your muscle car. Out-handle the competition and put all of that horsepower to the ground. Heidts Pro-G IRS suspension kits produce 1/2 degree of camber curve at 3/4 of bump, especially during very high cornering loads. Features include: * Cast iron Ford 9 in. center section mounted in an aluminum housing * 31-spline posi-traction hooked up to heavy-duty half shaft CV joint axle shafts * Tubular upper and lower control arms * Steel outer uprights * Top crossmember * Frame mounting brackets * Wilwood rear brake rotors and calipers * Billet aluminum single adjustable coilover shocks with silver powdercoated springs
Not Yet Reviewed
$7,893.99
—
$15,504.99
Heidts 1967-72 Chevy C-10 Complete Chassis Kits
Heidts 1967-72 Chevy C-10 Complete Chassis Kits are the best bang for your buck, if you're looking to replace and upgrade your truck frame. 1967-72 Chevy C-10 complete chassis kit details: * Brand new 1967-72 C-10 frame * Heidts 1967-72 Superide independent front suspension * 1 1/4 in. upper and 1 1/2 in. lower tubular control arms * Front billet single adjustable coilover shocks with 450 lb. coil springs * 11 in. iron rotors with black 4-piston Wilwood calipers and GM bolt pattern * Power rack and pinion steering with 20:1 ratio and 3 Turn-to-Lock * Stock spindles * Heidts 1967-72 C-10 rear 4-link suspension * Rear billet adjustable coilover shocks with 300 lb. coil springs * 64 in. track housing with weld-on brackets and 31-spline axles
Not Yet Reviewed
$20,231.99
—
$28,592.99
Heidts 1932 Ford Complete Chassis Kits
Heidts' 1932 Ford Complete Chassis Kits come loaded with their Superide® independent front suspension and 4-link rear suspension with housing and coilover shocks. Upgrade to the Superide II IFS with advanced geometry for the ultimate in ride quality! These kits include 11 in. rotors with Wilwood 4-piston calipers, tubular control arms, rack and pinion, adjustable coilovers, and a sway bar. 1932 Ford complete chassis kit details: * Brand new 1932 Ford frame * Tubular control arms * Front billet coilover shocks with 400 lb. coil springs * 11 in. iron rotors, Wilwood 4-piston polished calipers with Ford bolt pattern * Manual rack and pinion steering * Standard spindles * Sway bar * Triangulated rear suspension * Billet rear coilover shocks with 250 lb. coil springs * 32-40 Ford crossmember * 9 in. Ford axle housing with 31-spline axles
Not Yet Reviewed
$17,488.99
Heidts 1964-70 Ford Mustang PRO-G Independent Rear Suspension Kits
Heidts Pro-G IRS suspension kits are designed to bring the superior ride and handling of independent rear suspension to your muscle car. Out-handle the competition and put all of that horsepower to the ground. Heidts Pro-G IRS suspension kits produce 1/2 degree of camber curve at 3/4 of bump, especially during very high cornering loads. Features include: * Cast iron Ford 9 in. center section mounted in an aluminum housing * 31-spline posi-traction hooked up to heavy-duty half shaft CV joint axle shafts * Tubular upper and lower control arms * Steel outer uprights * Top crossmember * Frame mounting brackets * Wilwood rear brake rotors and calipers * Billet aluminum single adjustable coilover shocks with silver powdercoated springs
Not Yet Reviewed
$14,973.99
RJays Disc Brake Upgrades
RJays Speed Shop is a one-stop source for all your chassis needs for 1928-40 Fords and 1947-54 Chevy trucks. Their vast assortment of hot rod components include several disc brake upgrades, such as: * Upgrade to full chrome front dropped axle with GM disc brakes * Upgrade to rear GM disc brakes with E-brake * Upgrade to rear Wilwood polished 4-piston disc brakes with E-brake Vintage cars and trucks can enjoy the benefits of modern brake technology. Order the upgrade kit recommended for your application.
Not Yet Reviewed
$426.99
—
$2,196.99
Heidts 1955-59 Chevy Truck Complete Chassis Kits
Heidts 1955-59 Chevy Truck Complete Chassis Kits come loaded with the Superide II independent front suspension and 4-link rear suspension with housing and coilover shocks. The IFS system out-handles the competition with advanced geometry for the ultimate in ride quality. Superide II kits include 11 in.; rotors with Wilwood 4-piston calipers; tubular control arms; power rack and pinion; adjustable coilovers; and a sway bar. 1955-59 Chevy truck complete chassis kit details: * Heidts Superide® II independent front suspension * Tubular control arms * 11 in. iron rotors, Wlwood 4-piston black brake calipers * GM bolt pattern * Front billet coilover shocks with 400 lb. coil springs * Power rack and pinion steering * Stock spindles * Sway bar * Rear 4-Link suspension with weld-on panhard bar mount * Rear coilover shocks with 300 lb. coil springs * 9 in. Ford axle housing with 31-spline axles
Not Yet Reviewed
$16,310.99
Heidts 1970-74 Mopar Challenger and Barracuda PRO-G Independent Front Suspension Kits
Heidts 1970-74 Mopar Challenger and Barracuda PRO-G independent front suspension kits are a comprehensive, bolt-in upgrade designed to replace the stock factory torsion bar suspension with a modern, high-performance, double A-arm front suspension system. Specifically engineered for 1970-1974 E-body vehicles, these kits improve handling and cornering using adjustable coilovers, rack-and-pinion steering, and Wilwood brakes. Key features: * Complete system: Hub-to-hub kit includes a new crossmember, tubular control arms, spindles, and power rack-and-pinion steering * Performance upgrades: Features QA1 adjustable coilover shocks and springs for height and ride tuning * Improved geometry: Designed to eliminate bump steer and allow for significant caster and camber adjustments * Braking: Comes standard with 11 in. Wilwood rotors and 4-piston calipers * Engine fitment: Accommodates Mopar small block, big block, and Gen 3 Hemi engines, usually requiring a rear-sump oil pan * The kit is tailored to bring modern handling capabilities to classic Mopar muscle cars, reducing unsprung weight and increasing overall torsional rigidity
Not Yet Reviewed
$7,623.99
Roadster Shop SPEC Chassis Kits
Roadster Shop SPEC chassis kits offer Roadster Shop quality at an affordable price point. The SPEC Series is an engineering-focused approach, using the latest in manufacturing technology, to build the lightest, strongest, and easiest-to-install complete chassis systems. These technologies have been used to streamline procedures resulting in lower cost and shorter lead times. The SPEC independent front suspension is engineered to deliver outstanding performance in a user friendly package. It features proprietary suspension geometry designed to provide the best balance of ride quality and performance in its class. Available as On-The-Shelf, pre-configured chassis or custom specifications to suit your needs. Features and benefits of Roadster Shop SPEC chassis kits include: * Full-chassis performance at a smaller component price * Unparalleled quality * Add the strength of a full frame with no floor modifications on most applications * CNC laser-cut, TIG-welded, and contoured "Laser Rails" frame rails * No kinks, bends, or stressed areas that are prone to flex like mandrel-bent tubing * Stronger, lighter, and more precise * CNC-located factory mounts built into the frame for easy, vehicle specific installation * Frame rails accommodate mini-tubs and wider wheels * Aggressive ride heights for the modern pro-touring look * Choice of coilover or air suspension for many applications * Air suspension chassis will lay the rockers on the ground (varies with tire size) * Truck rear frame rail kick ups engineered for minimal bed modifications while allowing rockers to lie on the ground * Crossmembers and chassis bracing allow 3 in. exhaust * Adjustable, drop-out transmission mounts (tunnel mods may be necessary for larger T-56 and 4L80 transmissions) * Vehicle specific body (cab and bed on trucks), bumper, and core support mounts * Single-adjustable billet coilovers * Power rack and pinion steering * Easy-to-adjust upper A-arm eccentric mounts for fast and accurate alignments * Wilwood Pro Spindles * Parallel 4-bar rear suspension * Ford 9 in. housing with 31 spline axles * Optional mounts, coilovers, sway bars, brake packages, and rear-end gearing available on custom-order chassis * 5 x 4.75 wheel bolt pattern * Frames are shipped as bare steel
( 14 )
$15,803.99
—
$17,763.99
Moser Engineering 9 in. Housing and Axle Packages
Moser Engineering 9 in. housing and axle packages give you the freedom to choose the components that you prefer, while still fitting your vehicle without any modifications. They include a steel housing, an axle shaft set with wheel studs, and bearings. You can order them with brakes, or to fit your OEM brakes or a specific brake kit. Available in a multitude of options, these packages are a perfect fit for your everyday driver or performance vehicle.
Not Yet Reviewed
$3,114.99
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster