Free Shipping on Orders Over $109 at Summit Racing

EMAX Industrial Plus Silent Air Piston Compressors

EMAX Industrial Plus Silent Air piston compressors are quiet. The most common complaints about compressors are their high noise levels. EMAX Silent Air units not only still the noise, but they also do it with a big cfm output and lower rpm. Featuring their Whisper 100 system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling intake air through a series of baffle plates and prefilter media inside the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer structure; plus, it also provides secondary filtration for cleaner air. Industrial Plus Silent Air piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with a built-in fan. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. All EMAX Industrial Plus compressors have low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Their 15 Service Factor means the motors can be pulled 15 percent over full load. Depending on the application, many Silent Air piston compressors feature totally enclosed, fan-cooled (TEFC) motors that keep harmful dust and particulates out of the motor. This allows them to be used in dusty commercial and industrial environments without worrying about maintenance. They have 100 percent copper windings with pre-wired magnetic starters (necessary on any motor over 15 amps). These are high-quality, name brand, premium efficiency motors that meet all UL and CSA requirements. Some lower horsepower models are equipped with name brand, open-drip (OPD) motors. The running and starting windings on these motors are all 100 percent copper-wound for premium efficiency, reliable performance, and durability. These units also meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Plus Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * Raised-pump mounting platforms that open the underside of the crankcase to cooling air flow * Automatic belt tensioners for much easier and quicker adjustments and alignment * Selectable continuous-run or automatic start/stop operation to maximize performance and reduce wear * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Dual-timer automatic tank drains eliminate maintenance * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings

4.75 out of 5 stars ( 16 )

$4,578.90

EMAX Industrial Piston Compressors

Offering the same quality and durability as their Industrial Plus Series (without the extra cost of some features), EMAX Industrial piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with built-in fans. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. Industrial Series compressors have name brand, open-drip (OPD), low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. With low harmonic distortion, these motors provide much higher torque in cold weather starting, and require less electricity to start. Other features include large starting and running capacitors, and dynamically balanced armatures. Running and starting windings are all copper-wound for premium efficiency, reliable performance, and durability. These motors meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX uses only taper-lock style, 2-groove pulleys with dual 2-groove, B-style belts to drive their pumps. Dual belts ensure long belt life with low vibration for smoother, quieter operation because dual belts do not have to be as tight as a single belt. Tighter belts put more load on the compressor pump and the motor bearings; that decreases the life of both. Much better than a fixed bore pulley with a set screw; the taper-lock design locks the pulley in position on the motor shaft preventing it from loosening or moving. EMAX piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * OSHA-approved, 13-gauge steel, expanded metal belt guards * ASME code-compliant tanks * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings * Big 1 3/8 in. output shafts * 15 Service Factor motors can be pulled 15 percent over full load

4.5 out of 5 stars ( 2 )

$8,394.60

Vintage Air Gen-V SureFit Systems Complete Kits

Vintage Air Gen-V SureFit Systems complete kits are powerful and intelligent climate control systems. Available for vehicles with or without factory air, they use an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and-fin cooling coils provide outstanding performance and instant temperature adjustments. Vintage Air Gen-V SureFit Systems feature variable blower speed and dash/floor/defrost blend. They will include everything in an evaporator kit, plus all underhood components, such as compressor, engine brackets, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware, and installation instructions. Additional features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection-molded case for optimal precision, strength, and quality * Injection-molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high performance blower * Bolt-in replacement control panel

4.63 out of 5 stars ( 8 )

$2,276.99

—

$2,858.99

Vintage Air Gen-V Magnum Max SureFit Systems Complete Kits

Vintage Air Gen-V Magnum Max SureFit Systems climate control complete kits offer powerful and technologically advanced control. They employ an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate, state-of-the-art, high-density aluminum heat exchangers pack the maximum possible performance and reliability within the confines of your dash. Each complete kit includes everything from the evaporator kit with Magnum Max blower, plus all under-hood components, such as the compressor and bracket, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware, and detailed installation instructions. Select the Vintage Air Gen-V Magnum Max SureFit complete kit designed for your vehicle. Features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength, and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * New electronic control panel included * Stamped firewall cover assembly * Quiet high performance blower

Not Yet Reviewed

$2,609.99

Vintage Air Gen-IV SureFit Systems Complete Kits

Ditch the cables for the totally cool Vintage Air Gen-IV SureFit Systems complete kits. These fly-by-wire systems are fully electronic servo motor controls--there are no cables or capillary tubes to route. Gen-IV systems are model-specific and offer climate-control technology for real-deal, bi-level airflow and "just right" temperature air blending. Vintage Air SureFit Gen-IV all-in-one systems are delivered with an evaporator kit, a condenser and drier package, brackets, mounting hardware, and instructions for a professional finish that maintains your car's value and cool looks. Chill your classic car the electronic way with Vintage Air Gen-IV SureFit Systems complete kits.

Not Yet Reviewed

$2,329.99

—

$2,556.99

Vintage Air Gen-V SureFit Max Systems Complete Kits

Vintage Air 5th generation SureFit climate control systems are the most powerful and technologically advanced systems available today. They employ an exclusive, fully electronic microprocessor-controlled system that eliminates cables or vacuum connections. Separate, state-of-the-art, high-density aluminum heat exchangers pack the maximum possible performance and reliability within the confines of your dash. Additional features include variable blower speed and dash/floor/defrost blend. Complete kits include everything in the evaporator kit plus, all underhood components such as compressor, engine brackets, condenser with brackets, pre-formed refrigerant lines, drier, fittings, hardware and installation instructions. Additional details: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Powdercoated steel mounting brackets * Quiet high-performance blower * Includes new bolt-in, LED backlit control panel * Stamped steel firewall cover panel * Steel firewall water drip tray * Replacement steel glove box (reduced capacity)

Not Yet Reviewed

$2,715.99

ProCharger P-1X High Output Supercharger Systems

ProCharger P-1X high-output supercharger head units feature the robust, self-contained gearcase that is standard on most ProCharger models, but with a new aerodynamic compressor design. They create cooler-charge air temperatures and more horsepower at the same boost level and step-up ratio as their industry-standard supercharger kits (P-1SC-1 and D-1SC). This higher efficiency design is engineered to be a bolt-in replacement for both of those—they fit in the same brackets—and offers greater maximum-power potential. The compressor side of these superchargers (the volute and impeller) was redesigned with greater efficiency and less parasitic engine load in mind. This produces less heat and power needed to spin the impeller—and that adds up to more horsepower. Bolt-on some of the largest street-legal power gains available with a ProCharger P-1X high-output supercharger system. Additional features: * 10-15 flywheel horsepower gain on otherwise stock, modern V8 automotive engines at the same boost level and pulley size (versus P-1SC-1 models) * Larger gains possible at the same boost level with built and modified motors * 875-plus horsepower-capable * Designed for today's high-flowing modern V8 engines producing 300-plus naturally-aspirated horsepower * Available as optional upgrade with ProCharger systems and tuner kits * Highly-durable, high-horsepower designs with a compact, state-of-the-art 9.0 in. housing/volute * Available with standard or reduced-noise level * Slightly larger volutes than P-1SC-1/D-1SC models

Not Yet Reviewed

$8,154.00

—

$9,759.00

Eddie Motorsports V-Drive V-Belt Pulley Drive Systems

Tough, shiny, beautiful, and powerful are all words that come to mind when looking into Eddie Motorsports V-Drive V-belt pulley drive systems. These multiple-component systems are constructed from billet aluminum for optimum strength, corrosion resistance, and longevity. They include an aluminum water pump, Powermaster 170 amp alternator, Gates V-belts, and all necessary stainless steel hardware. GM Type II power steering pumps and Sanden-style SD7 A/C compressors are used on units with power steering or air conditioning. Polished or clearcoated systems use polished finished components. Choose the options and fitment for your specific application—then enjoy the incredible performance, exceptional style, and tough construction of Eddie Motorsports V-Drive V-belt pulley drive systems.

4.5 out of 5 stars ( 2 )

$2,008.95

Eddie Motorsports S-Drive Serpentine Pulley Drive Systems

Eddie Motorsports S-Drive serpentine pulley drive systems are the latest advancement in engine accessory kits on the market. These drive system pulleys and brackets are CNC-machined from 6061 T-6 aluminum and include stainless steel fasteners, as well as other necessary accessories: water pumps, alternators, serpentine belts, A/C compressors and tensioners. Change the efficiency of your engine with a single 6-rib serpentine belt to drive all of your accessories. Note: Not for applications with VVT.

4.16 out of 5 stars ( 19 )

$3,108.95

Roadster Shop SPEC Chassis Kits

Roadster Shop SPEC chassis kits offer Roadster Shop quality at an affordable price point. The SPEC Series is an engineering-focused approach, using the latest in manufacturing technology, to build the lightest, strongest, and easiest-to-install complete chassis systems. These technologies have been used to streamline procedures resulting in lower cost and shorter lead times. The SPEC independent front suspension is engineered to deliver outstanding performance in a user friendly package. It features proprietary suspension geometry designed to provide the best balance of ride quality and performance in its class. Available as On-The-Shelf, pre-configured chassis or custom specifications to suit your needs. Features and benefits of Roadster Shop SPEC chassis kits include: * Full-chassis performance at a smaller component price * Unparalleled quality * Add the strength of a full frame with no floor modifications on most applications * CNC laser-cut, TIG-welded, and contoured "Laser Rails" frame rails * No kinks, bends, or stressed areas that are prone to flex like mandrel-bent tubing * Stronger, lighter, and more precise * CNC-located factory mounts built into the frame for easy, vehicle specific installation * Frame rails accommodate mini-tubs and wider wheels * Aggressive ride heights for the modern pro-touring look * Choice of coilover or air suspension for many applications * Air suspension chassis will lay the rockers on the ground (varies with tire size) * Truck rear frame rail kick ups engineered for minimal bed modifications while allowing rockers to lie on the ground * Crossmembers and chassis bracing allow 3 in. exhaust * Adjustable, drop-out transmission mounts (tunnel mods may be necessary for larger T-56 and 4L80 transmissions) * Vehicle specific body (cab and bed on trucks), bumper, and core support mounts * Single-adjustable billet coilovers * Power rack and pinion steering * Easy-to-adjust upper A-arm eccentric mounts for fast and accurate alignments * Wilwood Pro Spindles * Parallel 4-bar rear suspension * Ford 9 in. housing with 31 spline axles * Optional mounts, coilovers, sway bars, brake packages, and rear-end gearing available on custom-order chassis * 5 x 4.75 wheel bolt pattern * Frames are shipped as bare steel

4.21 out of 5 stars ( 14 )

$15,470.99

10 Results Found For "air compressor"