Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
133 Results Found For "Kits"
Vintage Air Gen-V SureFit Systems Complete Kits
Vintage Air Gen-V SureFit Systems complete kits are powerful and intelligent climate control systems. Available for vehicles with or without factory air, they use an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and-fin cooling coils provide outstanding performance and instant temperature adjustments. Vintage Air Gen-V SureFit Systems feature variable blower speed and dash/floor/defrost blend. They will include everything in an evaporator kit, plus all underhood components, such as compressor, engine brackets, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware, and installation instructions. Additional features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection-molded case for optimal precision, strength, and quality * Injection-molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high performance blower * Bolt-in replacement control panel
( 8 )
$2,276.99
—
$2,858.99
RAM Truck Pulling Custom Order Clutch Kits
RAM truck pulling clutch kits are custom-assembled for your specific application. These units feature a heavy-gauge steel cover with welded spring guides and a steel pressure ring. Flywheels are available in 30 or 40 lb. weights, as well as in billet aluminum. The clutches can be set up with either 5135 or 5191 compound iron discs with 1 to 10 splines. Single disc slipper-style clutches can be used with engines producing up to 800 hp, or where very limited slipping is desired. These clutches utilize the same quality components as the RAM dual disc pulling clutches. These units can be assembled with your choice of sintered iron disc materials and flywheel weights. Dual disc clutches will allow a more controlled slip as the vehicle comes out, without severe wear or every-round maintenance. Dual disc clutches are built to fit different stock depths or deep bellhousings.
( 2 )
$1,849.99
—
$2,299.99
Baer Brakes SS4+ Disc Brake Systems
For serious stopping power, check out Baer's SS4+ disc brake systems. They're designed to fit most 15 in. wheels, and feature Baer's S4 4-piston caliper mounted to a 2-piece slotted, drilled, and zinc plated rotor. Kits include high-grade stainless hardware and a pre-assembled 2-piece rotor. These systems are available for the front or rear, in black, silver, and red finishes. Order the model designed for your axle and wheel bolt pattern. If you've been looking for a street-legal, lightweight, drag strip or autocross-compatible brake system—you've come to the right place!
( 10 )
$1,949.95
Classic Performance Lowering Kits
Classic Performance lowering kits are custom-built and feature gas-charged monotube shocks and coil springs that are made out of superior quality materials to ensure long-lasting dependability and performance. They are available in a 1 in., 2 in., or 3 in. drop, or at factory height. If you're looking for a high-quality lowering kit for your classic ride, these Classic Performance custom-built lowering kits have you covered.
( 19 )
$378.99
Heidts Bolt-In 4-Link Kits
Heidts offers bolt-in 4-link kits for a variety of applications from the 1960s and '70s. Delivering maximum performance, the kits are complete bolt-ons, with no cutting or floor modifications required—and the adjustable 4-link mounts allow for suspension tuning. Each kit includes brackets, adjustable links, top crossmember, standard black coilover shocks, and hardware. Get an easier handle on performance with Heidts bolt-in 4-link kits.
( 2 )
$2,411.00
Roadster Shop SPEC Chassis Kits
Roadster Shop SPEC chassis kits offer Roadster Shop quality at an affordable price point. The SPEC Series is an engineering-focused approach, using the latest in manufacturing technology, to build the lightest, strongest, and easiest-to-install complete chassis systems. These technologies have been used to streamline procedures resulting in lower cost and shorter lead times. The SPEC independent front suspension is engineered to deliver outstanding performance in a user friendly package. It features proprietary suspension geometry designed to provide the best balance of ride quality and performance in its class. Available as On-The-Shelf, pre-configured chassis or custom specifications to suit your needs. Features and benefits of Roadster Shop SPEC chassis kits include: * Full-chassis performance at a smaller component price * Unparalleled quality * Add the strength of a full frame with no floor modifications on most applications * CNC laser-cut, TIG-welded, and contoured "Laser Rails" frame rails * No kinks, bends, or stressed areas that are prone to flex like mandrel-bent tubing * Stronger, lighter, and more precise * CNC-located factory mounts built into the frame for easy, vehicle specific installation * Frame rails accommodate mini-tubs and wider wheels * Aggressive ride heights for the modern pro-touring look * Choice of coilover or air suspension for many applications * Air suspension chassis will lay the rockers on the ground (varies with tire size) * Truck rear frame rail kick ups engineered for minimal bed modifications while allowing rockers to lie on the ground * Crossmembers and chassis bracing allow 3 in. exhaust * Adjustable, drop-out transmission mounts (tunnel mods may be necessary for larger T-56 and 4L80 transmissions) * Vehicle specific body (cab and bed on trucks), bumper, and core support mounts * Single-adjustable billet coilovers * Power rack and pinion steering * Easy-to-adjust upper A-arm eccentric mounts for fast and accurate alignments * Wilwood Pro Spindles * Parallel 4-bar rear suspension * Ford 9 in. housing with 31 spline axles * Optional mounts, coilovers, sway bars, brake packages, and rear-end gearing available on custom-order chassis * 5 x 4.75 wheel bolt pattern * Frames are shipped as bare steel
( 14 )
$15,470.99
ProCharger P-1SC-1 Supercharger Kits
ProCharger P-1SC-1 supercharger kits are absolutely the most powerful and reliable supercharger systems offered for your vehicle. For street use or at the track, they'll deliver the largest increase in horsepower and torque available from any supercharger system. Their extremely low-charge air temperatures provide much better engine longevity by protecting your motor from detonation. These supercharger kits are designed with a fundamental understanding of the physics behind supercharging and are engineered to the highest quality standards. By using CNC machining and nearly indestructible 7075 T-6 aircraft aluminum to produce the largest and strongest impellers in the industry, they're able to again improve both performance and reliability. The P-1SC-1 kits are the only centrifugal superchargers to incorporate billet impellers in production models. Hundreds of models are available to ensure precise fitment on your vehicle. Select the ProCharger system and options tailored for your application.
( 9 )
$7,074.00
—
$9,684.00
Heidts 4-Link Rear Suspension Kits
Heidts 4-link kits transform your classic vehicle into a high performance fun street machine with a modern suspension. These complete kits stiffen the body, and the tunable rear 4-links provide the best traction and bring a ton more tuning potential to the table. Bolt-in and weld-in kits are both available. Heidts utilizes proven engineering and design for high performance street and track purposes.
( 2 )
$2,411.00
Vintage Air Gen-V Magnum Max SureFit Systems Complete Kits
Vintage Air Gen-V Magnum Max SureFit Systems climate control complete kits offer powerful and technologically advanced control. They employ an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate, state-of-the-art, high-density aluminum heat exchangers pack the maximum possible performance and reliability within the confines of your dash. Each complete kit includes everything from the evaporator kit with Magnum Max blower, plus all under-hood components, such as the compressor and bracket, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware, and detailed installation instructions. Select the Vintage Air Gen-V Magnum Max SureFit complete kit designed for your vehicle. Features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength, and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * New electronic control panel included * Stamped firewall cover assembly * Quiet high performance blower
Not Yet Reviewed
$2,609.99
Magnuson Radix TVS1900 Supercharger Kits
Down to the smallest part, the Magnuson line of TVS1900 bolt-on supercharger systems are engineered as a complete package. The supercharger, supercharger intake manifold, inlet, pulley, fuel injectors, fuel rails, front & rear fuel crossovers, and intercooler come pre-assembled to make installation simple and easy while the accessory box is organized into individual sub-assemblies to help ensure that you don't lose track of parts in the middle of your installation. All the hardware needed for a full and complete installation is also included so you won't be running to the local parts store in the middle of your installation. In addition, our full color, step-by-step installation manuals will walk you through the install process with exact attention to detail. Magnuson's TVS1900 superchargers utilize EATON's latest 6th Generation supercharger rotor technology found in such industry leading performance vehicles as the Corvette ZR-1, the Cadillac CTS-V, and the 2013 Mustang GT500. These Twin Vortices Series superchargers feature a pair of four-lobe, high-helix rotors with 160-degrees of overall twist that are housed in Magnuson's patented high-flow housing. This highly efficient package requires less power to drive, delivers cooler discharge temperatures, and is much quieter than many of its competitors. These superchargers are all manufactured in their TS16949 certified facility – the highest ISO OEM quality certification standard in the market.
( 5 )
$7,395.00
Magnuson Magnum TVS2300 Supercharger Kits
Magnuson Magnum TVS2300 supercharger is designed to deliver maximum performance while retaining factory-like drivability and reliability. Generating 6 psi of boost, the Magnuson TVS2300 Hybrid Roots Style Supercharger delivers power gains of approximately 120 horsepower and 120 foot-pounds of torque at the rear wheels! But peak horsepower and torque numbers don't tell the whole story. "Under the curve" power is significantly enhanced delivering near instantaneous boost and torque upon demand that really pins you back in your seat. Inside of the supercharger manifold, a large liquid-to-air intercooler keeps your Intake Air Temperatures in check and provides consistent and repeatable performance. Combine that with the front-mounted heat exchanger, electric water pump, and intercooler coolant reservoir and you have a supercharger system with IATs that are typically only 20-40 degrees Fahrenheit over the ambient temperature. Maximizing your efficiency during cruising is the job of the supercharger's integrated bypass valve. This vacuum operated system allows air to bypass the supercharger and the rotors to "free spin" under light engine loads. During this situation the parasitic loss of the supercharger system is essentially negated, taking less than one-third of a horsepower to turn the rotors. This bypass valve also allows your supercharged vehicle to maintain stock-like derivability and fuel economy - giving you a package that delivers power without compromise.
( 4 )
$7,595.00
—
$8,195.00
Classic Performance Drop Spindle Brake Kits
Classic Performance drop spindle brake kits will lower the nose of your vehicle, while improving braking performance. These kits include calipers, rotors, lines, spindles, and all necessary hardware. Classic Performance drop spindles are made from high-quality ductile iron and have a CNC-machined 4130 chromoly pin. The drop spindles come completely assembled with all included parts. Order the model designed for fitment on your vehicle application.
( 61 )
$718.99
—
$1,481.99
Classic Performance 1968-74 GM Midsize Car Stock Spindle Disc Brake Kits
These Classic Performance 1968-74 GM midsize car stock spindle disc brake kits are designed to improve your stopping power. They fit with most 15 in. diameter wheels or larger.
( 1 )
$1,375.99
McGaughy's Suspension Lift Kits
Give your rig a lift—via McGaughy's suspension lift kits! Their key components feature a brilliant gloss metallic silver powdercoat for longevity and durability. Installation is easy with minimal drilling; no re-routing of the exhaust, or cutting or grinding on the front or rear differential is necessary. This equipment is CNC-formed, machined, and laser-cut in-house from the highest grade materials. The spindles are CAD-designed for a perfect and accurate fit. Complete kits include the lower A-frame support rods, along with compression struts to add extra support and prevent the front and rear crossmembers from flexing. Dozens of kits are available for vehicles from the 1990s and up. Choose the style, lifted height, and other options recommended for your application; then elevate your rig to a higher stance with McGaughy's suspension lifts.
( 8 )
$2,477.99
—
$3,136.99
Moser Engineering Drum Brake Kits
Moser Engineering offers drum brake kits for a variety of applications. These replacement parts are made from materials that meet or exceed OEM specifications for performance and long-lasting dependability.
Not Yet Reviewed
$575.00
Vintage Air Gen-V SureFit Max Systems Complete Kits
Vintage Air 5th generation SureFit climate control systems are the most powerful and technologically advanced systems available today. They employ an exclusive, fully electronic microprocessor-controlled system that eliminates cables or vacuum connections. Separate, state-of-the-art, high-density aluminum heat exchangers pack the maximum possible performance and reliability within the confines of your dash. Additional features include variable blower speed and dash/floor/defrost blend. Complete kits include everything in the evaporator kit plus, all underhood components such as compressor, engine brackets, condenser with brackets, pre-formed refrigerant lines, drier, fittings, hardware and installation instructions. Additional details: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Powdercoated steel mounting brackets * Quiet high-performance blower * Includes new bolt-in, LED backlit control panel * Stamped steel firewall cover panel * Steel firewall water drip tray * Replacement steel glove box (reduced capacity)
Not Yet Reviewed
$2,715.99
ProCharger P-1SC-1 High Output Supercharger Systems
ProCharger P-1SC-1 High Output supercharger kits are absolutely the most powerful and reliable supercharger systems offered for your vehicle. For street use or at the track, they'll deliver the largest increase in horsepower and torque available from any supercharger system. The extremely low-charge air temperatures provide much better engine longevity by protecting your motor from detonation. The supercharger kits are designed with a fundamental understanding of the physics behind supercharging and are engineered to the highest quality standards. By using CNC machining and nearly indestructible 7075 T-6 aircraft aluminum to produce the largest and strongest impellers in the industry, they're able to again improve both performance and reliability. The P-1SC-1 High Output kits are the only centrifugal superchargers to incorporate billet impellers in production models. Hundreds of models are available to ensure precise fitment on your vehicle. Select the ProCharger system and options tailored for your year/make/model.
Not Yet Reviewed
$6,549.00
—
$19,999.00
ProCharger P-1SC-1 Stage II Supercharger Systems
ProCharger P-1SC-1 Stage II supercharger systems deliver larger power gains, coolest charge air temperatures, and the greatest reliability. Thanks to many years of forced induction engineering and innovation, ProCharger technology offers extremely low charge air temperatures, that also provides much better engine longevity by protecting your motor from detonation. The P-1SC-1 Stage II supercharger systems are complete kits with their most-advanced, quiet, and self-lubricating superchargers, highly effective and larger air-to-air intercoolers, handheld programmer, and other components that create an attractive, OEM-quality installation. Cooler air makes more power, and ProCharger P-1SC-1 Stage II intercooled systems supply lots of it to increase horsepower and performance.
( 1 )
$6,849.00
—
$11,204.00
Harwood Lexan Windows
Harwood Lexan windows are designed to replace your factory glass windows. They are available in standard Lexan or Margard and come in different thicknesses for multiple street or race applications.
( 26 )
$235.99
Classic Performance Deluxe Lowering Kits
Classic Performance Deluxe lowering kits feature gas-charged monotube shocks and coil springs made out of superior-quality materials. Kits include front coils, rear coils, all four shocks, a shock relocation kit, an adjustable trac bar, and hardware. Their coils come powdercoated black and their trac bar comes powdercoated silver. They are available in stock height, as well as 1, 2, and 3 in. drop front coils, and stock height 2, 3, 4, or 5 in. drop rear coils. If you're looking for a high-quality lowering kit for your classic ride, look no further than these Classic Performance Deluxe.
( 8 )
$549.99
Brodix Cylinder Heads Top-End Packages for Chevy
Bolt one of these complete Brodix top-end packages for Chevy onto your short block for the potent tune-up performance you expect--without the wasted time and hassle of assembling all of the various components on your own. The experts at Brodix Cylinder Heads have done the legwork for you, providing quality heads, plugs, gaskets, covers, and hardware in one convenient kit. Brodix top-end packages include: * Fully assembled Brodix cylinder heads * Spark plugs * Head gaskets, intake gaskets, exhaust gaskets, carburetor gaskets, and valve cover gaskets * Valve covers with studs and nuts * Head bolts and washers * Intake bolts and washers * Available with single or dual-plane intake manifolds * Free Brodix hat
( 3 )
$4,880.99
Vintage Air Gen-IV SureFit Systems Complete Kits
Ditch the cables for the totally cool Vintage Air Gen-IV SureFit Systems complete kits. These fly-by-wire systems are fully electronic servo motor controls--there are no cables or capillary tubes to route. Gen-IV systems are model-specific and offer climate-control technology for real-deal, bi-level airflow and "just right" temperature air blending. Vintage Air SureFit Gen-IV all-in-one systems are delivered with an evaporator kit, a condenser and drier package, brackets, mounting hardware, and instructions for a professional finish that maintains your car's value and cool looks. Chill your classic car the electronic way with Vintage Air Gen-IV SureFit Systems complete kits.
Not Yet Reviewed
$2,329.99
—
$2,556.99
Classic Performance Complete Front and Rear Disc Brake Kits
Classic Performance complete front and rear disc brake kits are designed as direct bolt-on applications. They include front rotors and calipers, a master cylinder, and rear rotors and calipers. The complete kits are available in different configurations to fit either stock or aftermarket drop spindles. Brake lines, a proportioning valve, and mounting hardware are also included to complete the installation. Improve your ride, braking, steering, and handling with Classic Performance complete front and rear disc brake kits.
( 21 )
$1,375.99
—
$1,611.99
Johnson's Hot Rod Shop JHRS Kinmont Safety Stop Brakes
Johnson's Hot Rod Shop Kinmont Safety Stop brakes combine the vintage look of the original Kinmont design with the stopping power of modern disc brakes. They also include internal features that make them easy to bleed and maintenance-free. Designed around the venerable 1937-48 Ford spindle, they use a 10.5 in. vented rotor with a 4-piston caliper. The aluminum caliper is equipped with proper internal dust caps and seals, and stainless steel pistons. The design allows for easy assembly and access to the bleed valves. The drum cover and backing plate are precision cast and available in natural-cast or polished finishes. The billet aluminum hubs are offered in three patterns to fit most wheel configurations. There are other Kinmont replica brakes out there, but JHRS Kinmont Safety Stop brakes have what it takes to last and to look great for many years.
Not Yet Reviewed
$2,399.99
—
$3,449.00
