Free Shipping on Orders Over $109 at Summit Racing

Heidts Mustang II Front Suspension Kits

Get your street rod up and rolling and improve your vehicle's suspension, handling, and performance with one of these Heidts Mustang II front suspension kits. Kits include: * Crossmember * Tubular upper and lower full A-frame style control arms * 11 in. diameter brake rotors * Bearings * Seals * Shocks * Springs * Stock-type spindles * Manual rack and pinion mounted to the front of the crossmember for additional engine clearance * Outer tie rod ends * Rubber spring cushions * Spindle nuts * All necessary mounting hardware

5.0 out of 5 stars ( 5 )

$2,700.00

Vintage Air Gen-V SureFit Systems Complete Kits

Vintage Air Gen-V SureFit Systems complete kits are powerful and intelligent climate control systems. Available for vehicles with or without factory air, they use an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and-fin cooling coils provide outstanding performance and instant temperature adjustments. Vintage Air Gen-V SureFit Systems feature variable blower speed and dash/floor/defrost blend. They will include everything in an evaporator kit, plus all underhood components, such as compressor, engine brackets, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware, and installation instructions. Additional features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection-molded case for optimal precision, strength, and quality * Injection-molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high performance blower * Bolt-in replacement control panel

4.63 out of 5 stars ( 8 )

$2,276.99

—

$2,858.99

Strange Heavy Duty 4-Piston Forged Aluminum Strut Packages

These Strange heavy-duty 4-piston forged aluminum strut packages will give your race car the consistency you need. They are recommended for vehicles over 2,600 lbs. and are designed for drag racing only. The packages include the following: * Strange heavy-duty 4-piston calipers with brake pads * Strange 11.250 in. slotted forged steel rotors * chromoly lower control arm kit * Strange adjustable forged aluminum struts * Hypercoil springs * Spring seat bearing kit A specification sheet must be filled out prior to ordering. The bolt pattern, lower control arm rod end diameter, and coilover spring rate are needed for your application. Please call us at 1-800-230-3030 for further information.

4.5 out of 5 stars ( 2 )

$2,349.99

—

$2,614.99

Heidts Nova Subframe/Crossmember Suspension Packages

You're low ridin' and lookin' good with Heidts Nova subframe/crossmember suspension packages. Your Chevy Nova will have a lower stance and the superior handling that street rods have enjoyed for some time. Heidts suspension packages make it easy to get that timeless look. Packages include: * Heidts front subframe * Tubular upper and lower arms * Stock spindles * 11 in. rotors with single-piston calipers * Manual rack and pinion steering * Stock shocks and springs

Not Yet Reviewed

$4,247.00

Strange Medium Duty 2-Piston Forged Aluminum Strut Packages

These Strange medium-duty 2-piston forged aluminum strut packages will give your race car the consistency you need. They are recommended for vehicles under 2,600 lbs. and are designed for drag racing only. The packages include the following: * Strange medium-duty 2-piston calipers with brake pads * Strange 11.250 in. slotted forged steel rotors * chromoly lower control arm kit * Strange adjustable forged aluminum struts * Hypercoil springs * Spring seat bearing kit A specification sheet must be filled out prior to ordering. The bolt pattern, lower control arm rod end diameter, and coilover spring rate are needed for your application. Please call us at 1-800-230-3030 for further information.

5.0 out of 5 stars ( 1 )

$2,169.99

—

$2,489.99

Classic Performance Pro-Touring Stage 1 Kits

Classic Performance Pro-Touring Stage 1 kits provide the ultimate in performance for an affordable price. They are made with the quality you have come to expect from Classic Performance Products. Included with the Stage 1 kits are front and rear performance sway bars, lowered springs, gas-charged monotube front and rear shocks, and mounting hardware.

4.0 out of 5 stars ( 2 )

$2,560.99

Classic Performance IFS Front Suspension Packages

Classic Performance IFS front suspension packages are designed to convert the entire front suspension of your classic car. You can now enjoy the smooth ride and handling of independent suspension, while lowering the ride height of your vehicle. Order the package recommended for your vintage application. Features include: * New crossmember * Tubular upper and lower control arms with polyurethane bushings * Manual rack and pinion with tie rod ends * Coil springs (some kits may include adjustable billet coilovers with springs) * Heavy-duty forged steel spindles * Brake calipers and rotors

3.57 out of 5 stars ( 7 )

$2,299.99

Classic Performance Pro-Touring Stage 2 Kits

Classic Performance Pro-Touring Stage 2 kits provide the ultimate performance for an affordable price. They are made with the quality you have come to expect from Classic Performance Products. Included with the Stage 1 kits are front and rear performance sway bars, lowered springs, adjustable coilover shocks, and mounting hardware.

4.33 out of 5 stars ( 3 )

$2,560.99

—

$2,652.99

American Powertrain Tremec T-56 Magnum Manual Transmissions and Installation Kits

American Powertrain Tremec T-56 Magnum manual transmissions and installation kits are designed to withstand up to 700 lbs.-ft. of torque. Their gears feature substantially increased face widths and 2-piece laser-beam welded construction, allowing for greater control of the tooth angles, pitch, and alignment. The transmissions also include a bolstered one-piece countershaft to resist distortion, and a stronger input shaft. Magnum's new synchronizers are built with fine-tooth angles, redesigned shift forks—and an extensively modified transmission case to prevent leaks under high-stress conditions and increase overall power-handling capabilities. Nearly two dozen models are available; choose the kit recommended for your vehicle application. Kits include: * Cryo-hardened steel driveshaft slip yoke with 1330 style U-joint * Mechanical speedometer conversion * VSS wiring harness for electronic speedometer of EFI ECU * Reverse light wiring, weather seal harness, non-polar * Reverse lockout wiring harness * ISO-X ballistic, low-profile transmission mount * Steel roller pilot bearing * White shift knob with black 6-speed shift pattern

Not Yet Reviewed

$4,750.95

—

$4,995.00

Zumbrota Remanufactured Transfer Cases

Zumbrota remanufactured transfer cases are put through a proprietary cleaning method, and arrive looking like new. But before they ship, each unit goes through complete inspection, component replacement, and quality control process to assure dependable, reliable shift-ability. Zumbrota rebuilds units from New Process, Borg Warner, and other major manufacturers to fill fitments for foreign and domestic passenger cars, trucks, and SUVs. Benefits of Zumbrota remanufactured transfer cases include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All cases are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent replacement of seals, bearings, viscous couplers (when applicable), and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty

3.86 out of 5 stars ( 7 )

$2,001.99

—

$3,852.89

RAM Truck Pulling Custom Order Clutch Kits

RAM truck pulling clutch kits are custom-assembled for your specific application. These units feature a heavy-gauge steel cover with welded spring guides and a steel pressure ring. Flywheels are available in 30 or 40 lb. weights, as well as in billet aluminum. The clutches can be set up with either 5135 or 5191 compound iron discs with 1 to 10 splines. Single disc slipper-style clutches can be used with engines producing up to 800 hp, or where very limited slipping is desired. These clutches utilize the same quality components as the RAM dual disc pulling clutches. These units can be assembled with your choice of sintered iron disc materials and flywheel weights. Dual disc clutches will allow a more controlled slip as the vehicle comes out, without severe wear or every-round maintenance. Dual disc clutches are built to fit different stock depths or deep bellhousings.

3.0 out of 5 stars ( 2 )

$2,299.99

iDEAL Equipment Electric/Hydraulic ATV Lift Benches

iDEAL Equipment electric/hydraulic ATV lift benches are up to the challenge of lifting all ATVs on the market today. Featuring a new and innovative retractable ramp system, with a pivot approach ramps that fold out of the way as the lift raises and become wheels stops. Keeping the safety of the technician in mind, a single point hand-held pendant controls lift bench functions for raising or lowering the platform, eliminating the need to use hands or feet to disengage manual safety latches. These features limit injury, while saving time and space, making your shop area more productive. Features and benefits: * Available in blue or black powdercoat finish * Lifting capacity 2,200 lbs. * Six locking positions * Extended length of 27.5 in. with full width approach ramp * Wheel stop * Overall length is 116.5 in. long, fully lowered * Platform is 88.6 in. Long x 50 in. wide * Maximum lift height 47.2 in. * 110 V integrated electric/hydraulic power unit

Not Yet Reviewed

$4,410.00

iDEAL Equipment Electric/Hydraulic UTV Lift Benches

Designed to fit the largest UTVs, iDEAL Equipment electric/hydraulic UTV lift benches feature a 2,200 lbs. capacity, along with a 65 in. x 88.6 in. platform. Featuring newly designed drive on pivot ramps that fold down and out of the way to become wheel stops. While an innovative retractable center ramp slides out of the way making for a safe, unobstructed workspace. Keeping the safety of the technician in mind, iDEAL Equipment electric/hydraulic UTV lift benches UTV side extensions incorporate innovative center drop panels providing unmatched service access, including motorcycle service, without removing the extensions. A single point hand-held pendant controls raising or lowering the bench, eliminating the need to use hands or feet to disengage manual safety latches. These features limit injury, while saving time and space, making your shop area more productive. Features and benefits: * Available in blue or black powdercoat finish * Lifting capacity 2,200 lbs. * Six locking positions * Extended length of 27.5 in. with full width approach ramp * Overall length is 116.5 in. long, fully lowered * Platform is 88.6 in. L x 65 in. W * Maximum lift height 47.2 in. * 110 V integrated electric/hydraulic power unit

Not Yet Reviewed

$4,920.00

On Sale

Ranger RP-30FCH Oil Filter Crushers

The Ranger RP-30FCH oil filter crusher applies 30,000 lbs. of crushing force against used oil filters that need to be completely drained of residual oil. The units manual stainless steel handle is ergonomically placed on the side of the crusher to safely manage its two-way stop-and-start operation. Save on waste disposal costs and storage space for your shop with the RP-30FCH oil filter crush press from Ranger Products. Specifications of the Ranger RP-30FCH oil filter crushers: * Welded steel plate construction * Electric-hydraulic power unit features 2 horsepower motor * Spring-loaded shutoff switch stops operation when door is opened * Transparent door for a convenient view of the crushing process * Powered by a 2 hp electric-hydraulic pump with 2-gallon reservoir * Rugged floor stand is designed to accommodate up to 55-gallon drums for efficient fluid handling * Maximum crushing pressure of 30,000 lbs. * Filters are reduced to 20 percent of their original size with 95 percent of residual oil removed * Fulfills EPA and other mandated environmental standards * Saves on waste disposal costs and storage space * Cycle time approximately 8 to 15 seconds, depending on filter size * No-mess design operates clean and efficiently to lessen spill hazards * Ergonomic controls feature manual cycles

Not Yet Reviewed

$3,095.00

$2,895.00

Ranger RML-1500XL Motorcycle/ATV Lifts

If you're looking for lifting capacity and capability, the Ranger RML-1500XL Motorcycle/ATV lifts deliver! A long list of features includes an extended work platform, 12-gauge steel construction, built-in retractable swivel casters, reversible bolt-on side decks, a cheater ramp, automatic safety locks, support poles, and a single hydraulic lifting cylinder and retracting rear wheel deck. The RML-1500XL Motorcycle/ATV lifts are a combination of power, solid construction, and user-friendly features. While there are copycats everywhere, just because it looks like a Ranger doesn't mean it works like one or lasts as long. Ranger's RML-1500XL Motorcycle/ATV lifts are rugged and tough with the muscle to prove it! Features: * With little effort, you can easily position, secure, and raise motorcycles, bobbers, stretched choppers, trikes, and other wheeled and recreational vehicles with ease * Features 12-gauge welded-steel construction, a non-skid diamond-plate platform surface and full travel automatic safety locks that allow various working heights * Side decks can be easily removed to provide a more compact work area for closer access to bikes when performing maintenance work or cleaning detail * A humongous 1,500 lb. lifting capacity handles just about anything that rolls * Retractable, built-in, full-swivel casters provide stow-and-go capability even when loaded * Precision ball bearings improve rollability and are virtually maintenance-free * A gentle slope, textured diamond-plate approach ramps, and a secondary cheater ramp means even ground huggers can be loaded effortlessly * Lift gets its power from a potent commercial-grade hydraulic power system that produces big lifting muscle right off the ground—dual-function power unit provides either air or hydraulic pump operation * User-friendly controls increase productivity, reduce injuries, save money, and improve job satisfaction * A wide base frame combined with full perimeter tie-down rings provides a stable work environment ensuring bikes and choppers remain upright; tip-over concerns remain a thing of the past * Chrome alloy hydraulic cylinder provides smooth, controlled operation and an extended-stroke ram means the RML-1500XL stands tall for improved ergonomics * A rigid tubular-steel wheel vise provides better stability and features a hardened steel crank and ergonomic handle for fast and easy set-up. Durable non-slip rubber contact plates help protect expensive wheels. * A removable rear deck provides drop-down clearance and accessibility for wheel and suspension work * A secondary rear deck with built-in dyno-rollers makes easy work out of wheel rotations and turns your motorcycle lift platform into a motoring test simulator * Rear vertical support poles provide a secure and stable support for hoist straps, as well as tie-downs for elevated bike testing or other floating required services * A removable tool and parts tray can be positioned at multiple Quick-Lock positions located on the perimeter of the lift platform

1.0 out of 5 stars ( 1 )

$3,295.00

American Powertrain ProFit Tremec TKX Manual Transmission and Installation Kits

American Powertrain ProFit Tremec TKX manual transmissions and installation kits put the power to the pavement with unmatched durability and versatility. Tremec has normally sourced their aftermarket transmissions from the OE side, such as the Magnum T-56 and the T-5, but this new design is made from the ground up as a strictly aftermarket transmission. Designed to fit classic muscle cars and customs, the TKX has a tighter, more streamlined case, and features 600 lbs.-ft. of torque capacity and are capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. The compact design provides clearance in most transmission tunnels without floor modifications, while case strength has increased from previous models with the new 3-piece aluminum housing and gaskets at all flanges simplifies installation and eliminates fluid leaks. Additional features include: * Designed with your specific vehicle application in mind * Available with multiple gear ratio configurations for compatibility for multiple applications with three shifter locations * Multi-cone synchronizers and synchronizer rings are made of sintered bronze and carbon for superior shifts * All gears are supported by caged needle bearings to reduce end play * Gears and shafts are made from ASTM 4615 grade steel and provide increased torque carrying capacity * TKX manual transmissions have 31-spline output shafts for added strength, built-in reverse light switches, and cruise control safety switches * The TKX also has separate GM and Ford case patterns and input configurations—with integrated GM and Ford transmission mount patterns * Installation kits include a driveshaft slip yoke made from cryogenically hardened steel, a polyurethane transmission mount, a steel roller pilot bearing, and a reverse light wiring harness

5.0 out of 5 stars ( 1 )

$4,395.00

—

$4,485.95

Vintage Air Gen-V Magnum Max SureFit Systems Complete Kits

Vintage Air Gen-V Magnum Max SureFit Systems climate control complete kits offer powerful and technologically advanced control. They employ an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate, state-of-the-art, high-density aluminum heat exchangers pack the maximum possible performance and reliability within the confines of your dash. Each complete kit includes everything from the evaporator kit with Magnum Max blower, plus all under-hood components, such as the compressor and bracket, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware, and detailed installation instructions. Select the Vintage Air Gen-V Magnum Max SureFit complete kit designed for your vehicle. Features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength, and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * New electronic control panel included * Stamped firewall cover assembly * Quiet high performance blower

Not Yet Reviewed

$2,609.99

Vintage Air Gen-IV SureFit Systems Complete Kits

Ditch the cables for the totally cool Vintage Air Gen-IV SureFit Systems complete kits. These fly-by-wire systems are fully electronic servo motor controls--there are no cables or capillary tubes to route. Gen-IV systems are model-specific and offer climate-control technology for real-deal, bi-level airflow and "just right" temperature air blending. Vintage Air SureFit Gen-IV all-in-one systems are delivered with an evaporator kit, a condenser and drier package, brackets, mounting hardware, and instructions for a professional finish that maintains your car's value and cool looks. Chill your classic car the electronic way with Vintage Air Gen-IV SureFit Systems complete kits.

Not Yet Reviewed

$2,329.99

—

$2,556.99

Scott's Hot Rods IFS Packages

Scott's Hot Rods IFS packages are the ultimate improvement to the ride quality and handling of your classic vehicle. Starting with a ground-up, clean-sheet design, these independent front suspension kits are custom-fit to your specific chassis. Optimized steering and suspension geometry provide modern handling, while adding the convenience and feedback of rack-and-pinion steering. Designed and fabricated in-house ensures precise, accurate fitment. These IFS packages are available in a wide array of ride heights, suspension options, brake configurations, and even wheel bolt patterns! Features include: * Stock, mild, or low ride height configurations * One-piece, boxed steel crossmember construction * Frame/chassis-specific frame notches and reinforcement plates * Fully adjustable, tubular upper and lower control arms * Oversized serviceable ball joints * Built-in anti-dive geometry * Rack and pinion steering * Forged steel spindles (stock or drop-height options) * Available with Wilwood brake packages in multiple color choices * Available air bag and multi-level coilover suspension options

5.0 out of 5 stars ( 4 )

$3,386.99

—

$3,682.99

iDEAL Equipment Electric/Hydraulic Motorcycle Lift Benches

iDEAL Equipment electric/hydraulic motorcycle lift benches feature a new and innovative retractable ramp system, with a pivot approach ramps that fold out of the way as the lift raises. Keeping the safety of the technician in mind, a spring-loaded drop-down panel in the table provides easier access to the rear wheel for service, while a single point hand-held pendant controls lift bench functions for raising or lowering the platform, eliminating the need to use hands or feet to disengage manual safety latches. These features limit injury, while saving time and space, making your shop area more productive. Features and benefits: * Available in blue or black powdercoat finish * Lifting capacity 2,200 lbs. * Six locking positions * Extended length of 27.5 in. with full width approach ramp * Wheel stop * Overall length is 116.5 in. long, fully lowered * Platform is 88.6 in. L x 31.5 in. W * Maximum lift height 47.2 in. * 110 V integrated electric/hydraulic power unit

Not Yet Reviewed

$3,770.00

Ranger R980XR Tire Changers

Ranger R980XR tire changers are space-savers that perform basic tire changes quickly and safely. They install flush against the wall, so it stays out of the way, and the included non-marring duck heads are perfect for a wide variety of wheels. Designed to perform and built to last, R980XR tire changers are equipped with powerful motors and gearboxes to work systematically at a controlled speed for easy tire removal and installation. The ergonomic controls are sensibly placed to minimize excessive reaching, walking, or bending, and large storage trays provide ample space for accessories. Features: * Inflation gauge with integrated air dump valve * Inflation pressure regulator/limiter * Brush * Alloy steel mount/demount head * Plastic polymer mount/demount head * Oiler/lubricator * Air regulator * Breaker bar * Large soap/lubricator bucket

Not Yet Reviewed

$4,795.00

iDEAL Equipment Electric/Hydraulic UTV Frame Lift Benches

Premium products at an affordable price. iDEAL Equipment electric/hydraulic UTV frame lift benches are frame engaging utility and all-terrain vehicle lifts allowing for easy wheel and suspension service. Featuring a 2,500 lbs. lift capacity, along with a 24 in. wide x 88.9 in. long platform, with flip-up extension platforms, and a small lift footprint providing a safe, unobstructed work area. Keeping the safety of the technician in mind, iDEAL Equipment electric/hydraulic UTV frame lift benches come with a portable or fixed pedestal control stand and fully operational control panel, with electro-magnetic lock release, eliminating the need to use hands or feet to disengage manual safety latches. These features limit injury, while saving time and space, making your shop area more productive. Features and benefits: * Available in blue or black powdercoat finish * Lifting capacity 2,500 lbs. * Three locking positions * Platform is 88.9 in. Long x 24 in. wide * 4.75 in. minimum height * 43 in. maximum lift height * Load bearing hinged platform extensions * Four 4.75 in. x 6.5 in. rubber contact lift pads included * 110 V integrated electric/hydraulic power unit

Not Yet Reviewed

$4,070.00

Ranger R76LT Tire Changers

If your general repair shop is looking for a swift tire changer that is fast, safe, and easy to use, the Ranger R80EX is the equipment your shop needs. The Ranger R76LT eliminates some of the add-ons that are specifically made to assist operators with tricky run-flats, low-profile tires, and particularly stubborn beads. Most passenger vehicle and pick-up tires don't have those problems, so this machine's tilt-back design simply offers what you want, and nothing more. The professional-grade R76LT features a large turntable that provides an internal clamping capacity of 30 in. and an external clamping capacity of 26 inches. A sturdy body, rigid 45mm hexagonal vertical shaft and hardened-steel horizontal outrigger support arm eliminates flex during all tire service procedures to reduce the likelihood of expensive wheels getting damaged. Bead seating and tire inflation is simple and effortless with Ranger's exclusive TurboBlast portable bead seating system. For ease of use, ergonomic controls are sensibly placed to minimize excessive reaching, walking, or bending. Key features and specs: * 3 hp (220 VAC 50-60 Hz) motor * Advanced drive belt system—spreads wear evenly throughout the machine, so belt functionality is not weakened over time, and the entire system is protected by the tire changer chassis * (4) clamps (internal/external) * Dual pneumatic cylinders prevent the equipment from vibrating too much, less movement means less friction— cushions are installed to soften the end of each stroke, preserving the seals, wear bands and piston rods so the whole design is self-lubricating and easy to maintain * Adjustable pneumatic blade * Tilt-Back Tower design * Vertical shaft/Tool head positioning * Inflation system/Inflation gauge and integrated air dump valve * Inflation pressure regulator/limiter * Water Filter * Oiler/Lubricator * Air regulator * Bead tool/Tire iron * Multi-functional alloy-steel mount-demount head—makes it easy to switch between functions without making adjustments. The tool head is gentle on tire beads when removing and replacing tires * Durable nylon mount-demount head is exceptionally good at protecting alloy rims and custom wheels * Large Soap Bucket/Soap brush * Powerful, TurboBlast bead seating system * Tool tray/Bin storage * Motorcycle turntable clamps (optional)

Not Yet Reviewed

$3,586.99

On Sale

BendPak RJ9W Rolling Lift Bridge Jacks

BendPak's RJ9W is a rolling bridge jack with 9,000-lb. capacity which is ideal for use on the BendPak HDS-18E four-post lift, especially if your vehicles have an unbalanced center of gravity—which is generally associated with heavier trucks and SUVs. The RJ9W rolling bridge comes standard with easy-roll wheels that fit inside the runway channels on standard four-post lift models and provide effortless gliding along the runways for easy positioning and adjustability. The BendPak rolling bridge jack rollers are made of hardened stainless-steel and zinc plated for maximum durability. Rubber contact pads are essential lifting components and increase rise and firmly engage your vehicle's undercarriage lift points—durable, non-marring surface ensures vehicle is not scraped or damaged during rolling bridge jack or car lift operation. Additional product features and specs: * Stackable adapters—give you the ability to stack and unstack BendPak contact pads that increases the versatility of your rolling bridge jack and are also useful for lifting vehicles that may have drastically different front-and-rear suspensions (with two rolling bridge jacks employed at once, the front may need an extra adapter to ensure an even lift) * BendPak's rolling bridge jacks include a pneumatic-hydraulic power unit that comes attached to the jack—the car lift runs off its own power unit, so there's no "sharing" of hydraulic power between the two (an airline must be attached to the rolling bridge jack with 125 psi and 10–20 cfm) an easy foot pedal control is included for safety and convenience * Three lock levels—with three lock positions, your rolling bridge jack can be raised to the level most comfortable for you so you can find the perfect height for the perfect job as you also adjust the height of your car lift * Optional air-line kit available (sold separately)

Not Yet Reviewed

$4,295.00

$4,095.00

30 Results Found For "controller"