Free Shipping on Orders Over $125 at Summit Racing

Peterson Fluid Systems R4 Oil Pumps

Peterson Fluid Systems R4 oil pumps utilize a revolutionary twisted lobe rotor design, allowing for all-aluminum rotors in all sections—saving a huge amount of weight while also increasing performance. Offered in wet and dry sump styles, the pumps are designed with shallow-depth screw-in fittings, creating low-profile modular units that can be outfitted with numerous options to be suited for a variety of applications. Hundreds of models are available; select the options that best suit your application. Peterson Fluid Systems R4 oil pumps feature: * 6061-T6 billet aluminum * CNC-machined for precision * Unique twisted 4-lobe rotor * Tab mounting system to save weight * Low profile for easier mounting * Wet sump pumps are single stage * Dry sump pumps are offered in 2 to 8 stages * Stages refer to total number of pumping bodies including one pressure section

4.5 out of 5 stars ( 2 )

$2,054.99

—

$2,506.99

American Powertrain Tremec T-56 Magnum Manual Transmissions and Installation Kits

American Powertrain Tremec T-56 Magnum manual transmissions and installation kits are designed to withstand up to 700 lbs.-ft. of torque. Their gears feature substantially increased face widths and 2-piece laser-beam welded construction, allowing for greater control of the tooth angles, pitch, and alignment. The transmissions also include a bolstered one-piece countershaft to resist distortion, and a stronger input shaft. Magnum's new synchronizers are built with fine-tooth angles, redesigned shift forks—and an extensively modified transmission case to prevent leaks under high-stress conditions and increase overall power-handling capabilities. Nearly two dozen models are available; choose the kit recommended for your vehicle application. Kits include: * Cryo-hardened steel driveshaft slip yoke with 1330 style U-joint * Mechanical speedometer conversion * VSS wiring harness for electronic speedometer of EFI ECU * Reverse light wiring, weather seal harness, non-polar * Reverse lockout wiring harness * ISO-X ballistic, low-profile transmission mount * Steel roller pilot bearing * White shift knob with black 6-speed shift pattern

Not Yet Reviewed

$4,750.95

—

$4,995.00

On Sale

iDEAL Equipment 2-Post Clear Floor Lifts

iDEAL Equipment 2-post clear floor lifts are premium vehicle lifts featuring low profile swing arms, adjustable height swivel pads, and single point cable lock release. The rigid construction and arm configuration provides for stable lifting, making them perfect for super-duty and light-duty trucks along with most passenger cars. Available in two styles; bi-symmetric, 3-stage, 180-degree rotatable lift arms, with direct 'pull' drive cylinders, and a lift capacity of 10,000 lbs. or symmetric lift arms, with direct "push" drive cylinders, and a lift capacity of 12,000 lbs. iDEAL Equipment 2-post clear floor lifts are ALI certified, equipped with automatic arm restraints, hose guards, door guards, and finished with a durable powdercoat finish for a high-quality lift at a terrific value! Features and benefits: * Adjustable height swivel pads * Stackable height adapters * Certified Duro power unit * Limited warranty, 5-year structural and 1-year parts

Not Yet Reviewed

$5,270.00

$4,970.00

Forgeline Carbon Forged Series CF205 Custom-Order Wheels

If you appreciate the world's most advanced wheel technology, want to stand apart from the crowd with unique styling and finish options, and have the means to afford the very finest, then Forgeline's Carbon Forged Series CF205 custom-order wheels are quite literally created just for you! Custom made-to-order, Forgeline Motorsports engineers and builds every set of forged wheels one-at-a-time from scratch for each individual customer and each unique vehicle application. Within the limits determined by the wheel style and the forging from which it is made, in most cases, Forgeline can create a custom size, lug pattern, and backspace/offset to create the perfect fitment for almost any application! The ultra-lightweight Carbon+Forged CF205 wheel combines a weight-optimized CNC-machined forged aluminum center with Forgeline's revolutionary proprietary carbon fiber barrel to deliver the ultimate in technological advancement, exclusive styling, and unparalleled performance. The CF205's take advantage of a carbon fiber barrel with a lightweight racing-inspired ten spoke forged aluminum center design, open-lug hub center, and aggressive I-beam machining details to yield a wheel with absolutely impressive performance metrics: very low static mass, very low rotational inertia, minimal deflection, and excellent fatigue strength! (Note: Carbon+Forged carbon fiber barrel preserves the standard high-gloss natural carbon weave finish). These wheels are intended for Street use. Not recommended for track applications. Customer must complete the Instruction sheet attachment for all wheel and related component information before a final price and availability can be provided. Finished price and availability will depend on the final configuration. Non-Returnable; each custom wheel is made-to-order. As mentioned, the price will vary depending on size selected and the chosen options. Achieve the look and fit you're after with the Forgeline custom wheel for your ride. All custom-order wheels are Special Order and Non-Returnable.

Not Yet Reviewed

$4,700.00

—

$4,850.00

GSI Machine and Fabrication Air Ride Bolt-On Front Suspension Kits

GSI Machine and Fabrication offers Air Ride bolt-on front suspension kits for a variety of applications—including many 1960s and '70s era Chevrolet trucks. These 100 percent bolt-in front crossmember kits include all the necessary components to replace your old worn-out suspension with new, modern air ride. Custom-designed tie rod adapters require no modification to the spindle; while narrowed track width facilitates driving and turning low. Wheel position has been moved forward 1 in. to center the wheel in the wheel opening; and upgraded steering powers rack and pinion. Kits are designed to use "clamshell" style motor mounts with a GM 350 engine; LS, LT, and big block engines are compatible with the use of GSI motor mount adapters (available separately). Everything has been carefully planned and designed to obtain the best drivability and easiest installation possible. Notes: * When installing an LS-based engine, the use of an F-body style oil pan is required * The rack and pinion unit is a late '80s Mustang-style with a 3/4-36 spline * Removal of inner fender well is required * Power steering hoses and fittings can be found at most speed shops or online retailers * Recommended wheel specs: 8.5 in. wide with 5.5 in. backspace or 9 in. wide with 6.0 in. backspace * Misc steering parts such as U-joints and shafts are not included * Designed around 71/72 C10 spindles, making this front end compatible with several brake kits Key features: * Re-engineered suspension and steering geometry * Raised crossmember for increased ground clearance * 61 in. track width * 8.5 in. adjustable suspension lift * Built-in limit stops * Updated steering to power rack and pinion unit * Easy alignment with eccentric cams at all four lower control arm pivots * Designed to lay frame when using up to a 30 in. tall tire

Not Yet Reviewed

$4,499.99

EMAX Industrial Plus Silent Air Piston Compressors

EMAX Industrial Plus Silent Air piston compressors are quiet. The most common complaints about compressors are their high noise levels. EMAX Silent Air units not only still the noise, but they also do it with a big cfm output and lower rpm. Featuring their Whisper 100 system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling intake air through a series of baffle plates and prefilter media inside the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer structure; plus, it also provides secondary filtration for cleaner air. Industrial Plus Silent Air piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with a built-in fan. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. All EMAX Industrial Plus compressors have low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Their 15 Service Factor means the motors can be pulled 15 percent over full load. Depending on the application, many Silent Air piston compressors feature totally enclosed, fan-cooled (TEFC) motors that keep harmful dust and particulates out of the motor. This allows them to be used in dusty commercial and industrial environments without worrying about maintenance. They have 100 percent copper windings with pre-wired magnetic starters (necessary on any motor over 15 amps). These are high-quality, name brand, premium efficiency motors that meet all UL and CSA requirements. Some lower horsepower models are equipped with name brand, open-drip (OPD) motors. The running and starting windings on these motors are all 100 percent copper-wound for premium efficiency, reliable performance, and durability. These units also meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Plus Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * Raised-pump mounting platforms that open the underside of the crankcase to cooling air flow * Automatic belt tensioners for much easier and quicker adjustments and alignment * Selectable continuous-run or automatic start/stop operation to maximize performance and reduce wear * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Dual-timer automatic tank drains eliminate maintenance * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings

4.75 out of 5 stars ( 16 )

$4,578.90

—

$4,980.00

QuickJack 6000ELX Car Lifts

There's a lot you can do with an extra 3 in.--QuickJack 6000ELX car lifts are designed to raise 3 in. taller than previous models and of course, they provide the same portability, safety, and convenience in your garage that QuickJack is known for. They also provide an extended lift point spread (53 to 76 in.) and longer frame length (86.75 in.). Features: * 6,000 lb. capacity * Lifts higher without sacrificing QuickJack's patented super-low profile when fully lowered * Built with 14-gauge steel * Open center design * Automatic safety locks * Integrated ultra-durable urethane rubber wheels that allow you to roll them into position * Easy to store

5.0 out of 5 stars ( 1 )

$2,324.99

ATI TH400 Transmissions

ATI Performance Products TH400 transmissions offer great performance for 400 c.i.d. or larger big blocks. Modifications and options include: * Fully blueprinted and equipped with high-flow lube circuits, increased torque capacity, and hard chrome oil rings * Sprags replaced with heavy-duty units * Clutch packs are assembled for individual applications * Compu-Flow valve body standard * Special low-gear sets for increased launch capability * Lightweight options available to upgrade the transmission

4.0 out of 5 stars ( 1 )

$2,505.99

—

$4,659.99

ATI TH350 Transmissions

ATI TH350 transmissions are durable and effective high performance 3-speed transmissions. Modifications and options include: * Fully blueprinted and equipped with high-flow lube circuits, increased torque capacity, and hard chrome oil rings * Sprags replaced with heavy-duty units * Clutch packs are assembled for individual applications * Compu-Flow valve body standard * Special low-gear sets for increased launch capability * Lightweight options available to upgrade the transmission

Not Yet Reviewed

$2,046.99

—

$2,956.99

Banks Power Ford 1997-2005 6.8L V-10 Class A Motorhome PowerPack Systems

Is your motorhome "shift-happy"? If so, Banks PowerPack systems can give your Ford 6.8L V-10 Class A coach a whole new attitude! With a swift kick of performance, Banks PowerPacks optimize your engine's airflow for increased power, prolonged engine life, and better mileage. The systems include proven bolt-on power adjusters like: Ram Air with a Super Scoop; stainless heat-shielded 5-tube TorqueTube exhaust manifolds—with a patented PowerPickle pulse converter; a low-restriction Dynaflow muffler; and a Monster exhaust with a tailpipe and tip. An OttoMind engine calibration module may be included, depending on the application. All of these components pack the power for all speeds under all conditions with plenty of torque when you need it the most. Plus, they can raise your average mpg by 7.4 percent! You can end the shift-happy behavior of your Ford V-10 motorhome with a Banks Power PowerPack system.

Not Yet Reviewed

$3,009.00

Ranger R76LT Tire Changers

If your general repair shop is looking for a swift tire changer that is fast, safe, and easy to use, the Ranger R80EX is the equipment your shop needs. The Ranger R76LT eliminates some of the add-ons that are specifically made to assist operators with tricky run-flats, low-profile tires, and particularly stubborn beads. Most passenger vehicle and pick-up tires don't have those problems, so this machine's tilt-back design simply offers what you want, and nothing more. The professional-grade R76LT features a large turntable that provides an internal clamping capacity of 30 in. and an external clamping capacity of 26 inches. A sturdy body, rigid 45mm hexagonal vertical shaft and hardened-steel horizontal outrigger support arm eliminates flex during all tire service procedures to reduce the likelihood of expensive wheels getting damaged. Bead seating and tire inflation is simple and effortless with Ranger's exclusive TurboBlast portable bead seating system. For ease of use, ergonomic controls are sensibly placed to minimize excessive reaching, walking, or bending. Key features and specs: * 3 hp (220 VAC 50-60 Hz) motor * Advanced drive belt system—spreads wear evenly throughout the machine, so belt functionality is not weakened over time, and the entire system is protected by the tire changer chassis * (4) clamps (internal/external) * Dual pneumatic cylinders prevent the equipment from vibrating too much, less movement means less friction— cushions are installed to soften the end of each stroke, preserving the seals, wear bands and piston rods so the whole design is self-lubricating and easy to maintain * Adjustable pneumatic blade * Tilt-Back Tower design * Vertical shaft/Tool head positioning * Inflation system/Inflation gauge and integrated air dump valve * Inflation pressure regulator/limiter * Water Filter * Oiler/Lubricator * Air regulator * Bead tool/Tire iron * Multi-functional alloy-steel mount-demount head—makes it easy to switch between functions without making adjustments. The tool head is gentle on tire beads when removing and replacing tires * Durable nylon mount-demount head is exceptionally good at protecting alloy rims and custom wheels * Large Soap Bucket/Soap brush * Powerful, TurboBlast bead seating system * Tool tray/Bin storage * Motorcycle turntable clamps (optional)

Not Yet Reviewed

$3,586.99

Ranger R745 Tire Changers

Ranger R745 tire changers are rigid tower tire machines designed to handle the needs of heavy-volume tire shops. A sturdy body, rigid 45mm hexagonal vertical shaft, and hardened-steel horizontal outrigger support arm eliminate flex during all tire service procedures—to reduce the chance of expensive wheels getting damaged. A supersized turntable provides an internal clamping capacity of 21 in. and external clamping capacity of 18 in. With a long list of time-saving features, you'll safely mount low-profile performance tires and wheels with little effort. Standard features: * Inflation gauge with integrated air dump valve * Brush * Water Filter * Tool tray / storage * Breaker bar * Oiler / lubricator * Air regulator * Large soap * Lubricator bucket * Inflation restraint

5.0 out of 5 stars ( 1 )

$2,895.00

Forgeline Carbon Forged Series CF201 Custom-Order Wheels

If you appreciate the world's most advanced wheel technology, want to stand apart from the crowd with unique styling and finish options, and have the means to afford the very finest, then Forgeline's Carbon Forged Series CF201 custom-order wheels are quite literally created just for you! Custom made-to-order, Forgeline Motorsports engineers and builds every set of forged wheels one-at-a-time from scratch for each individual customer and each unique vehicle application. Within the limits determined by the wheel style and the forging from which it is made, in most cases, Forgeline can create a custom size, lug pattern, and backspace/offset to create the perfect fitment for almost any application! The Carbon+Forged CF201 wheel combines a weight-optimized CNC-machined forged aluminum center with a revolutionary proprietary carbon fiber barrel to deliver the ultimate in technological advancement, exclusive styling, and unparalleled performance. The CF201 takes advantage of its carbon fiber barrel with a lightweight racing-inspired five V-spoke forged aluminum center design and aggressive I-beam machining details to yield a wheel with absolutely impressive performance metrics: very low static mass, very low rotational inertia, minimal deflection, and excellent fatigue strength! (Note: Carbon+Forged carbon fiber barrel preserves the standard high-gloss natural carbon weave finish.) These wheels are intended for Street use. Not recommended for track applications Customer must complete the Instruction sheet attachment for all wheel and related component information before a final price and availability can be provided. Finished price and availability will depend on the final configuration. Non-Returnable; each custom wheel is made-to-order. As mentioned, the price will vary depending on size selected and the chosen options. Achieve the look and fit you're after with the Forgeline custom wheel for your ride. All custom-order wheels are Special Order and Non-Returnable.

Not Yet Reviewed

$4,700.00

—

$4,850.00

BendPak Steel Approach Ramps

BendPak steel approach ramps make it easier to get your low-profile car on to the lift without risk of damage. Their ramps offer heavy-duty construction, extended lengths, a low-rise design, a textured surface for better tire grip, and extra width to support big wheels and vehicles. BendPak ramps include brackets and necessary hardware to set them up. Choose a pair of ramps designed for your BendPak lift.

2.0 out of 5 stars ( 1 )

$2,150.00

—

$4,295.00

Scott's Hot Rods IFS Packages

Scott's Hot Rods IFS packages are the ultimate improvement to the ride quality and handling of your classic vehicle. Starting with a ground-up, clean-sheet design, these independent front suspension kits are custom-fit to your specific chassis. Optimized steering and suspension geometry provide modern handling, while adding the convenience and feedback of rack-and-pinion steering. Designed and fabricated in-house ensures precise, accurate fitment. These IFS packages are available in a wide array of ride heights, suspension options, brake configurations, and even wheel bolt patterns! Features include: * Stock, mild, or low ride height configurations * One-piece, boxed steel crossmember construction * Frame/chassis-specific frame notches and reinforcement plates * Fully adjustable, tubular upper and lower control arms * Oversized serviceable ball joints * Built-in anti-dive geometry * Rack and pinion steering * Forged steel spindles (stock or drop-height options) * Available with Wilwood brake packages in multiple color choices * Available air bag and multi-level coilover suspension options

5.0 out of 5 stars ( 4 )

$3,386.99

—

$3,682.99

Heidts Nova Subframe/Crossmember Suspension Packages

You're low ridin' and lookin' good with Heidts Nova subframe/crossmember suspension packages. Your Chevy Nova will have a lower stance and the superior handling that street rods have enjoyed for some time. Heidts suspension packages make it easy to get that timeless look. Packages include: * Heidts front subframe * Tubular upper and lower arms * Stock spindles * 11 in. rotors with single-piston calipers * Manual rack and pinion steering * Stock shocks and springs

Not Yet Reviewed

$4,247.00

Forgeline Carbon Forged Series CF206 Custom-Order Wheels

If you appreciate the world's most advanced wheel technology, want to stand apart from the crowd with unique styling and finish options, and have the means to afford the very finest, then Forgeline's Carbon Forged Series CF206 custom-order wheels are quite literally created just for you! Custom made-to-order, Forgeline Motorsports engineers and builds every set of forged wheels one-at-a-time from scratch for each individual customer and each unique vehicle application. Within the limits determined by the wheel style and the forging from which it is made, in most cases, Forgeline can create a custom size, lug pattern, and backspace/offset to create the perfect fitment for almost any application! The ultra-lightweight Carbon+Forged CF206 wheel combines a weight-optimized CNC-machined forged aluminum center with Forgeline's revolutionary proprietary carbon fiber barrel to deliver the ultimate in technological advancement, exclusive styling, and unparalleled performance. The CF206 is based upon Forgeline's super-light CF205 but is specially engineered for six-lug Dodge Viper applications. It combines a carbon fiber barrel with a lightweight racing-inspired 12-spoke forged aluminum center design, 6-lug open-lug hub, and aggressive I-beam machining details to yield a wheel with absolutely impressive performance metrics: very low static mass, very low rotational inertia, minimal deflection, and excellent fatigue strength! (Note: The Carbon+Forged carbon fiber barrel preserves the standard high-gloss natural carbon weave finish.) These wheels are intended for Street use. Not recommended for track applications. Customer must complete the Instruction sheet attachment for all wheel and related component information before a final price and availability can be provided. Finished price and availability will depend on the final configuration. Non-Returnable; each custom wheel is made-to-order. As mentioned, the price will vary depending on size selected and the chosen options. Achieve the look and fit you're after with the Forgeline custom wheel for your ride. All custom-order wheels are Special Order and Non-Returnable.

Not Yet Reviewed

$4,850.00

Zumbrota Remanufactured Manual Transmissions

Zumbrota remanufactured manual transmissions are some of the most dependable 5-speed, 6-speed, and transaxle units available. Each transmission is put through tremendous testing and inspections to assure the highest quality possible to use in your vehicle. Benefits of Zumbrota remanufactured manual transmissions include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All housing and top covers are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent inspection of internal parts, including gear wear checks, main shaft straightness test and synchronizer testing * 100 percent replacement of seals, bearings, and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty

3.71 out of 5 stars ( 21 )

$2,099.99

—

$4,266.99

Zumbrota Remanufactured Transfer Cases

Zumbrota remanufactured transfer cases are put through a proprietary cleaning method, and arrive looking like new. But before they ship, each unit goes through complete inspection, component replacement, and quality control process to assure dependable, reliable shift-ability. Zumbrota rebuilds units from New Process, Borg Warner, and other major manufacturers to fill fitments for foreign and domestic passenger cars, trucks, and SUVs. Benefits of Zumbrota remanufactured transfer cases include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All cases are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent replacement of seals, bearings, viscous couplers (when applicable), and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty

3.86 out of 5 stars ( 7 )

$2,202.99

—

$3,852.89

Moser Engineering 9 in. Housing and Axle Packages

Moser Engineering 9 in. housing and axle packages give you the freedom to choose the components that you prefer, while still fitting your vehicle without any modifications. They include a steel housing, an axle shaft set with wheel studs, and bearings. You can order them with brakes, or to fit your OEM brakes or a specific brake kit. Available in a multitude of options, these packages are a perfect fit for your everyday driver or performance vehicle.

Not Yet Reviewed

$3,114.00

20 Results Found For "low"