Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
86 Results Found For "Steel"
Callies Compstar Crankshafts
You're installing value without compromising quality with Callies Compstar crankshafts. Finished and inspected by Callies, Compstar cranks maintain proper geometry and design. Hardened with deep nitride, They're ideal for all types of abusive racing environments and available in a wide variety of strokes and journal sizes to fit most common cubic inch requirements. All rod journals are drilled and counterweights are profiled for piston clearance. Sometimes you need to race within a budget, but with Callies' consistent grind and polish, as well as their precise stroke and index, you don't need to compromise on quality. Choose Callies Compstar crankshafts--they're better by design.
( 10 )
$1,011.00
—
$1,051.00
On Sale
Ranger 1 1/2 Ton Transmission Jacks
When it comes to your behemoth of a transmission, let Ranger do the heavy lifting! Ranger super-duty 1 1/2 ton transmission jacks have an incredible 3,000 lb. lifting capacity--so they're designed for those jobs when a normal transmission jack just doesn't cut it! Features: * Foot operated pump * Alloy-plated ram * Two-stage design * Extra-wide base * Safety overload system * Adjustable saddle tilts two ways * Saddle slides the other two ways * Heavy-duty steel swivel casters * Two push/pull handles * Heavy steel construction for maximum durability * Sealed hydraulic unit prevents contamination * Double-sealed hydraulics for longer service life * Heavy-duty chain anchors keep loads secure * Two-stage design provides an extended lifting height of over 79 in. * Steel roller bearings are included underneath the table and on the ends of the adjustment screw to minimize friction * Fine-thread adjustment screws with oversized knobs make adjusting the table a cinch * System overload system prevents the jacks from being used beyond their rated capacity * Extra-wide base * Four heavy-duty swivel ball bearing casters provide a low center of gravity and maneuverability
( 2 )
$1,100.00
$1,025.00
BendPak MLS-18 High Jack Stands
The BendPak MLS-18 high jack stands are designed to support raised heavy-duty vehicles and facilitate maintenance and inspection procedures. These support stands are designed to be used in sets of four, six, or eight, and must be placed under a level, raised vehicle at the support points designated by the vehicle manufacturer. For extra support exactly where you need it most, count on the BendPak MLS-18 mobile high-lift jack stands. They're capable of holding up to 18,000 lbs. each. The high jack stands are sold individually, order the quantity needed. Features and specs: * Tripod design evenly distributes weight under load * Each leg is equipped with an 11 sq. in. floor pad * Can be easily moved and placed under a vehicle by means of two 3 in. diameter wheels * Equipped with a foldaway transport handle * Center tube is spring-assisted to facilitate adjustment of the stand * Adjustable from 48.7 in. up to 74.5 in. * 9-pin positions * 1-inch diameter self-locking ACME screw for fine adjustment of the stand height
Not Yet Reviewed
$1,325.00
Ranger RWB-1TD Heavy-Duty Teardown Work Benches
Ranger RWB-1TD heavy-duty teardown work benches are sure to become your dedicated work area. When you're looking for maximum versatility and efficiency, these work benches offer a 500 lb. working capacity, over 9 sq. ft. of tabletop, a removable polyethylene fluid catch, a lockable drawer, and a height-adjustable shelf. These work bench/teardown table/storage facility units sit on four heavy-duty (two locking) 4 in. swivel casters. Plus, they are given an electrostatic oven-baked glossy red powdercoat that will look great for years. Now, there is no project too small or too big when your garage or shop is equipped with Ranger RWB-1TD heavy-duty teardown work benches.
Not Yet Reviewed
$1,050.00
Sanderson Headers Zoomie Headers
These are the real deal! Sanderson Zoomie headers have patented leak-free flanges and include bolt-in baffles for street use. Offering the classic dragster look, these headers are available in several finishes to complete and complement your hot rod or roadster. Features include: * 16-gauge primary and collector tube thickness * 3/8 in. thick flange * Patented flange design requires no gaskets * Header bolt set * Baffle set
( 9 )
$1,189.51
Classic Performance Engine Install Kits
So you're ready to swap in a super lightweight engine that will require no maintenance, yet cranks out unbelievable horsepower and torque—giving you a truck you can hop in, turn the key, and go! Now, Classic Performance offers engine install kits to upgrade and finish off your conversion with ease. These CPP kits will work on most all LS engines. Order the model recommended for your vehicle and engine application. Classic Performance engine install kits include: * Engine mount perches * Engine mount adapters * Engine pads * Full-length ceramic coated headers * Transmission crossmember * Mounting hardware
Not Yet Reviewed
$1,344.99
—
$1,413.99
Auto Dolly Ginormous Tandem Axle Dolly
Auto Dolly Ginormous tandem axle dollies are giant-sizes dollies that hold enormous weight--a massive 8,000 lbs. per dolly! These super-high weight capacity Ginormous dollies are built from super-strong 1/4 in. steel and given an extra layer of strength and 12 casters. The casters are made from heavy-duty, non-marring polyolefin with a crown profile for less resistance. Plus, they have the ability to pinch small debris out of their path. The dollies also feature a durable powdercoated finish and are delivered fully assembled. Now, you can move high-capacity tandem vehicles and trailers you never thought you could, with Auto Dolly Ginormous tandem axle dollies.
Not Yet Reviewed
$1,069.99
On Sale
Flaming River Tilt Floor Shift Steering Columns
Flaming River tilt floor shift steering columns feature large tube diameters and compact shrouds to create a unique custom look. Designed specifically for use with floor shifters and available in a variety of styles, lengths, and shaft sizes, they come complete with a billet dress up kit (tilt, turn signal lever, and hazard knob), and wiring. They are manufactured from high-quality 304 grade stainless steel, will never rust, and are available in a variety of finishes--including a paintable mill finish, black powdercoated, or polished. Mill finish columns are shipped chemically clean and can be painted to match or highlight any interior with only minor preparation. Key column units (see Ignition Key Location above) include an integrated ignition key located at the 3 o'clock position, with no welded-on attachments or extra relays required. Keyed columns are complete with a key assembly, wiring, and ignition switch.
( 109 )
$1,162.99
Flaming River Custom Order Tilt Column Shift Steering Columns
Flaming River custom order tilt column shift steering columns feature a large tube diameter and a compact shroud to create a unique custom look. They are manufactured from high quality 304 grade stainless steel in a paintable mill finish, or polished to a high luster. The columns will never rust and are chemically clean and can be painted to match or highlight an interior with only minor preparation. These custom order steering columns are built to your needs, and require a specification sheet filled out prior to ordering.
Not Yet Reviewed
$1,249.99
—
$1,297.99
ATI Super Damper Supercharged Series Harmonic Balancers
These Supercharged series dampers place the powerful protection of ATI Super Damper inside of the crankshaft blower pulley. Available in 66 to 77-tooth 8mm pitch, and 40 to 51-tooth 14mm pitch, these balancers eliminate torsional crankshaft vibrations. These balancers exceed SFI 18.1 specs, have laser-engraved 360 degree timing marks, and are finished in a black zinc chromate. Numerous pulley offsets are available to keep the blower drive as close to the engine as possible, reducing the bending moment to the crankshaft nose.
( 18 )
$1,116.00
—
$1,359.99
Sanderson Headers Jayster Headers
Sanderson Headers Jayster headers are a new take on the classic Lakester-style headers. Named after designer Jay Wangerine, the unique 4-into-1 design catches the eye like nothing else. Constructed from high-quality materials and designed to offer the best fitment, these headers are sure to stand-out on the street or at the show. Modernize your classic open fender hot rod with Sanderson Headers Jayster headers. Features include: * 16-gauge primary and collector tubing * 3/8 in. thick header flange * Patented gasket-less flange design * Available in several finish options
( 1 )
$1,243.88
Flaming River Custom Order Tilt Floor Shift Steering Columns
Flaming River custom order tilt floor shift steering columns feature a large tube diameter and a compact shroud to create a unique custom look. They are manufactured from high quality 304 grade stainless steel in a paintable mill finish, or polished to a high luster. The columns will never rust and are chemically clean and can be painted to match or highlight an interior with only minor preparation. These custom order steering columns are built to your needs, and require a specification sheet filled out prior to ordering.
Not Yet Reviewed
$1,001.99
Carrillo Pro-A Connecting Rods
Carrillo Pro-A connecting rods are your choice connection to economical high performance. They offer a lightweight design for high engine speeds and limited cylinder pressures. These tapered connecting rods are crafted from robust forged steel that's heat-treated, shot-peened, and subjected to continuous quality checks to meet their stringent tolerances. On this quest for perfection, Carrillo has created their Pro-A rods with a symphony of precision that will make your engine sing at a price that will have you humming a happy tune. From their design engineers to their craftsmen, from premium materials through the forging process to shipping, they strive to put you in the winner's circle. Do you need rods? Choose Pro-A connecting rods from Carrillo--the people dedicated to creating success.
Not Yet Reviewed
$1,174.96
ididit Universal Tilt and Telescoping Floor Shift Steering Columns
Universal tilt and telescoping floor shift steering columns from ididit are unique in that they not only tilt, but they also telescope 1 1/2 in. toward the driver. These columns are available in a different finishes and lengths to fit your specific needs.
( 2 )
$1,006.00
—
$1,423.00
ATI Serpentine Conversion Pulley Kits
ATI serpentine conversion pulley kits contain everything you need to convert your stock 6-rib serpentine belt to an 8 or 10-rib. If you are requesting more boost, causing your 6-rib belt to slip, then these kits are for you. The wider 8-rib belt gives you more belt surface, which can create more boost without slippage. ATI also offers a 10-rib kit for those who need even more boost. These conversion kits include a damper, a power steering pulley, a tensioner with a bearing, and an alternator pulley.
Not Yet Reviewed
$1,080.00
—
$1,184.04
FTI Performance ESR Series Torque Converters
FTI Performance ESR Series torque converters are designed for mildly modified vehicles. They're built using Torrington bearings, race-prepped sprague hardened impeller hub, hardened turbine hub and splines, a new steel pilot, and laser-cut mounting ring. These units are available in a variety of sizes, advertised flash stall ratings, and numerous other options. Order the torque converter recommended for your transmission application.
( 65 )
$1,059.00
Classic Performance 1962-67 Nova MINI Subframe Kits
Eliminating the factory strut rods and adding adjustable forward control arm mounts, these Classic Performance 1962-67 Nova MINI subframe kits also improve steering response and add stability and over 2 in. of ground clearance. By getting rid of factory strut rods, you are able to maintain proper alignment without the use of a lockout plate and gain a free working up and down motion in the lower control arm. The results are better ride quality and positive road feedback. The Classic Performance 1962-67 Nova MINI subframe kits feature a one-piece, 1/4 in. thick steel crossmember that ties both frame rails together by bolting in where the factory strut rod mounts were located, providing additional strength. They also add only 2 lbs. to the car after removing the heavy factory strut rods and bulky strut rod mounts. There is no cutting or welding required. The rear of the lower control arm mounts in the factory location and the original camber adjustments are used. The front of the lower control mounts to the new crossmember and adds a forward caster adjustment to guarantee a perfect, simple, and hassle-free alignment. Please specify stock height or 1 1/2 in. drop coil springs and black or silver powdercoated control arms when ordering. The Classic Performance 1962-67 Nova MINI subframe kits also include: * 2 one-piece tubular upper and lower control arms * Coil springs * Rubber spring perches * Front shocks * 4 alignment cam kits * Grade 8 mounting hardware * Low-friction, long-life bushings * Premium upper and lower ball joints
( 2 )
$1,098.99
Bed Wood and Parts Bed-In-A-Box Standard Kits
Bed Wood and Parts Bed-in-a-Box standard kits include your unfinished wood choice, mild (paintable) steel bed strips, and zinc coated hardware. Offered in dozens of domestic and exotic choices, the wood is ready to accept your favorite finish thanks to Bed Wood's 3-stage sanding process. They are neatly packaged in a single box, eliminating the mishaps and additional costs that often occur with multiple packages. Revitalize your truck bed the easy way with a Bed Wood and Parts Bed-in-a-Box standard kit designed to fit your application!
Not Yet Reviewed
$1,074.00
Distinctive Industries Touring II Seats
Distinctive Industries Touring II seats offer original appeal with a new level of comfort and stability. The Touring II seats begin with a bolstered steel frame, which is TIG-welded and electrostatically coated for strength and durability, and then covered with their high-quality foam--so the bolstered frame supports the bolstered foam, creating a strong base. Distinctive Industries has painstakingly patterned the seats to closely mimic the original upholstery's design and details to complement your existing original interior. The Touring IIs also feature 20-position reclining seat backs--a real solution to a problem that has existed with the original seats for decades. Distinctive Industries Touring II seats will fit your restoration with classic style covering a modern feel, support, and value.
Not Yet Reviewed
$1,366.99
Banks Power Ford 1999-2006 6.8L Stinger Systems
Banks Power Ford 1999-2006 6.8L Stinger systems will strengthen your truck's muscle and durability with impressive gains in horsepower and torque. They're manufactured from quality materials to ensure performance, durability, and more hauling muscle. Kits include the following components: * Ram Air intake with air filter housing * 3.50 in. stainless steel Dynaflow muffler and a tailpipe * 4.00 in. polished stainless steel tailpipe tip
Not Yet Reviewed
$1,149.00
Forgeline Heritage Series ET3 Custom-Order Wheels
Forgeline's Heritage Series wheels represent the best of their designs from over two decades of engineering and producing the finest custom-made-to-order forged aluminum wheels in retro-inspired designs that work well with virtually every class of automobile, from muscle cars to supercars to luxury vehicles. Each wheel is custom made-to-order one at a time for each individual customer and each unique vehicle application. The Forgeline Heritage Series ET3 custom-order wheels are built with true forged 6061-T6 aluminum centers, aircraft-quality ARP stainless steel fasteners, and heat-treated rim sections. The Heritage Series ET3 features a deep concave design with five large slots to create a classic and clean style. This particular wheel design pays homage to the slotted mag wheels that were popular in the 1960s and 1970s, but it has been reborn here as a modern three-piece wheel with updated engineering and manufacturing technology. Available with a stepped lip outer in 17-inch and 18-inch fitments, these wheels feature a standard powdercoated center finish with a polished outer rim. But since each wheel is custom built-to-order, Forgeline can also offer special features like custom offsets, center locking hubs, and a large choice of finish combinations. Customer must complete the Instruction sheet attachment for all wheel and related component information before a final price and availability can be provided. Finished price and availability will depend on the final configuration. Non-Returnable; each custom wheel is made-to-order. As mentioned, the price will vary depending on size selected and the chosen options. Achieve the look and fit you're after with the Forgeline custom wheel for your ride. All custom-order wheels are Special Order and Non-Returnable.
Not Yet Reviewed
$1,095.99
—
$1,221.99
Forgeline Concave Series ML3C Custom-Order Wheels
The Forgeline Concave Series ML3C custom-order wheels are quite literally created just for you! Custom made-to-order means that all Forgeline wheels are custom made-to-order one at a time for each individual customer and each unique vehicle application. This consists of not only building the style of wheel and finish color that you want but also delivering custom sizes and fitments to best match your vehicle and your intended application. Within the limits determined by the wheel style and the forging from which it is made, in most cases, Forgeline can create a custom size, lug pattern, and backspace/offset to create the perfect fitment for almost any application! The Forgeline Concave Series ML3C is built with true forged 6061-T6 aluminum centers, aircraft-quality ARP stainless steel hidden fasteners, and heat-treated rim sections. This particular wheel design borrows styling references from the Minilite Trans Am wheels, of the late 1960s and early 1970s. With ten semi-rounded soft-sided spokes for a retro look, the ML3C harks back to the golden age of racing, while delivering modern technology and performance. This Forgeline wheel is available with a flat lip reverse outer in different fitment options and features a standard powdercoated center finish with a polished outer rim. But since each Forgeline ML3C wheel is custom built-to-order, Forgeline can also offer special features like custom offsets, center locking hubs, and a large choice of finish combinations. Customer must complete the Instruction sheet attachment for all wheel and related component information before a final price and availability can be provided. Finished price and availability will depend on the final configuration. Non-Returnable; each custom wheel is made-to-order. As mentioned, the price will vary depending on size selected and the chosen options. Achieve the look and fit you're after with the Forgeline custom wheel for your ride. All custom-order wheels are Special Order and Non-Returnable.
Not Yet Reviewed
$1,271.99
—
$1,454.99
Forgeline Premier Series SO3S Custom-Order Wheels
Forgeline Motorsports designs, engineers, and manufactures the world's finest custom made-to-order lightweight forged aluminum wheels for the most discerning car enthusiasts and the most demanding applications. The Forgeline Premier Series SO3S is a three-piece wheel with a classic five-spoke design with stepped-lip competition rim halves. Each SO3S wheel is custom-built with true forged 6061-T6 aluminum centers, heat-treated aluminum rim shells, and aircraft-quality stainless steel ARP fasteners. This Forgeline wheel features a standard powdercoated center finish and polished outer lip. And since each Premier Series SO3S wheel is built-to-order, Forgeline can offer special features like custom offsets and a large choice of finish combinations. Forgeline is so serious about delivering satisfaction that all of their wheels are totally made-to-order. Each wheel's backspacing, diameter, fit, finish, and appearance are under your control. Competition drives excellence at Forgeline Motorsports; let them forge a set of wheels for you! Customer must complete the Instruction sheet attachment for all wheel and related component information before a final price and availability can be provided. Finished price and availability will depend on the final configuration. Non-Returnable; each custom wheel is made-to-order. As mentioned, the price will vary depending on size selected and the chosen options. Achieve the look and fit you're after with the Forgeline custom wheel for your ride. All custom-order wheels are Special Order and Non-Returnable.
Not Yet Reviewed
$1,245.99
—
$1,371.99
Forgeline Grip Equipped Series Schism Custom-Order Wheels
Some of the world's finest custom lightweight forged aluminum wheels are right here—and we get them from Forgeline Motorsports! Forgeline Grip Equipped Series Schism custom-order wheels are a tapered and split 5-spoke design with some weight saving features and a focus on high performance. These 3-piece wheels are produced from forged 6061-T6 aluminum centers and heat-treated rim shells, assembled with hidden stainless steel fasteners and Heli-Coil inserts. Forgeline is so serious about delivering satisfaction that all of their wheels are totally made-to-order. Each wheel's backspacing, diameter, fit, finish, and appearance are under your control. Competition drives excellence at Forgeline Motorsports—let us forge a set of wheels for you! Customer must complete the Instruction sheet attachment for all wheel and related component information before a final price and availability can be provided. Finished price and availability will depend on the final configuration. Non-Returnable; each custom wheel is made-to-order. As mentioned, the price will vary depending on size selected and the chosen options. Achieve the look and fit you're after with the Forgeline custom wheel for your ride. All custom-order wheels are Special Order and Non-Returnable.
Not Yet Reviewed
$1,177.99
—
$1,329.99
