Free Shipping on Orders Over $125 at Summit Racing

Inland Empire Driveline High-Strength Custom Order Driveshafts

Big power and lots of traction can twist your stock driveshaft into pieces, so replace it with something better, such as these Inland Empire Driveline high-strength custom order driveshaft assemblies. The 3.5 in. diameter tubes are custom-drawn for consistent strength, and the forged yokes are welded on using state-of-the-art processes for improved reliability. A specification sheet must be filled out prior to ordering. Please call us at 1-800-230-3030 for further information.

4.8 out of 5 stars ( 15 )

$483.49

—

$1,300.71

American Powertrain Tremec T-56 Magnum Manual Transmissions and Installation Kits

American Powertrain Tremec T-56 Magnum manual transmissions and installation kits are designed to withstand up to 700 lbs.-ft. of torque. Their gears feature substantially increased face widths and 2-piece laser-beam welded construction, allowing for greater control of the tooth angles, pitch, and alignment. The transmissions also include a bolstered one-piece countershaft to resist distortion, and a stronger input shaft. Magnum's new synchronizers are built with fine-tooth angles, redesigned shift forks—and an extensively modified transmission case to prevent leaks under high-stress conditions and increase overall power-handling capabilities. Nearly two dozen models are available; choose the kit recommended for your vehicle application. Kits include: * Cryo-hardened steel driveshaft slip yoke with 1330 style U-joint * Mechanical speedometer conversion * VSS wiring harness for electronic speedometer of EFI ECU * Reverse light wiring, weather seal harness, non-polar * Reverse lockout wiring harness * ISO-X ballistic, low-profile transmission mount * Steel roller pilot bearing * White shift knob with black 6-speed shift pattern

Not Yet Reviewed

$4,750.95

—

$5,025.95

QuickJack 6000ELX Car Lifts

There's a lot you can do with an extra 3 in.--QuickJack 6000ELX car lifts are designed to raise 3 in. taller than previous models and of course, they provide the same portability, safety, and convenience in your garage that QuickJack is known for. They also provide an extended lift point spread (53 to 76 in.) and longer frame length (86.75 in.). Features: * 6,000 lb. capacity * Lifts higher without sacrificing QuickJack's patented super-low profile when fully lowered * Built with 14-gauge steel * Open center design * Automatic safety locks * Integrated ultra-durable urethane rubber wheels that allow you to roll them into position * Easy to store

5.0 out of 5 stars ( 1 )

$2,324.99

Zumbrota Remanufactured Manual Transmissions

Zumbrota remanufactured manual transmissions are some of the most dependable 5-speed, 6-speed, and transaxle units available. Each transmission is put through tremendous testing and inspections to assure the highest quality possible to use in your vehicle. Benefits of Zumbrota remanufactured manual transmissions include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All housing and top covers are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent inspection of internal parts, including gear wear checks, main shaft straightness test and synchronizer testing * 100 percent replacement of seals, bearings, and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty

3.71 out of 5 stars ( 21 )

$1,157.99

—

$7,012.99

American Racing VN506 Rally Polished Wheels

American Racing VN506 polished wheels are part of the company's Heritage Series lineup. These rims are a stylish and time-honored rallye wheel with a modern edge. Each rim is built from one-piece cast aluminum alloy to ensure superb strength, performance, and durability without excessive weight. VN506 wheels feature a unique spoke pattern design and a beautiful polished finish that gives a knockout look to your ride. They're available in various bolt patterns, diameters, and offsets—and include a polished rally center cap.

5.0 out of 5 stars ( 3 )

$340.99

—

$478.99

Zumbrota Remanufactured Transfer Cases

Zumbrota remanufactured transfer cases are put through a proprietary cleaning method, and arrive looking like new. But before they ship, each unit goes through complete inspection, component replacement, and quality control process to assure dependable, reliable shift-ability. Zumbrota rebuilds units from New Process, Borg Warner, and other major manufacturers to fill fitments for foreign and domestic passenger cars, trucks, and SUVs. Benefits of Zumbrota remanufactured transfer cases include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All cases are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent replacement of seals, bearings, viscous couplers (when applicable), and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty

3.86 out of 5 stars ( 7 )

$853.99

—

$3,852.89

Soffseal Individual Position Weatherstripping Seals

Soffseal individual position weatherstrips are designed to keep your vehicle sealed up tight. They're manufactured from high-quality materials designed to fit a single position. In fact, there are over 140 positions on vehicles that can use a seal. Soffseal individual position weatherstrip seals are built to OEM exacting tolerances, so they install easily and have a great look. Available for hardtop or convertible passenger cars and trucks, the Soffseal individual position weatherstrip seals will retain your OEM look and provide a positive seal on all exterior surfaces.

4.21 out of 5 stars ( 320 )

$3.42

—

$6.85

UREMCO Remanufactured Carburetors

UREMCO remanufactured carburetors are expertly built from core to finished product. Purchasing a reman carb can sometimes be iffy ... unless you choose wisely. United Remanufacturing Co. has over 60 years of experience in carburetor rebuilding. As fuel system rebuilders with expertise and stringent standards, they ensure you the best quality at the best price. They rebuild carburetors from most all automobile and truck manufacturers, and each one is individually inspected and rigorously tested on flow-bench engine simulators by seasoned and knowledgeable employees. All UREMCO carburetors come equipped with new needle and seats, base gaskets, gas filters, and accelerator pumps. The extensive process from disassembly, cleaning, and testing to final assembly restores these carburetors back to their original form, fit, and function. When you purchase a UREMCO remanufactured carburetor, you're buying quality, value, and, most importantly, peace of mind. Order the replacement model designed for your vehicle and engine application.

4.26 out of 5 stars ( 826 )

$263.99

DiabloSport Predator 2 Platinum Programmers

DiabloSport Predator 2 Platinum programmers are your custom tuning devices for both diesel and gas cars, trucks, and SUVs. Their P2 Platinum units offer the perfect tuning solution for enthusiasts that plan to add future upgrades, or have already upgraded their vehicles with aftermarket performance parts. They come pre-loaded with performance tunes designed to make the most of the stock setup and simple bolt-on parts like an intake or exhaust. When the serious mods come out, the DiabloSport P2 Platinum programmers really shine! Their nationwide network on CMR custom tuning dealers can write a custom tune designed with your mods in mind to make the most power possible! With custom tuning solutions available from DiabloSport's network of CMR dealers, you can tune for basically any upgrade you can think of. With their simple drag and drop custom tune loading process, you can be tuning your custom built ride in minutes. Predator 2 programmers now pair impressive data logging capabilities with the ability to store over 10 custom tunes on the device. You can keep multiple tunes on hand for any track condition or driving situation. With the easy-to-use, handheld design, you can tune in minutes and transform your ride into a Predator! Features include: * Pre-Loaded tunes for multiple driving styles * Easy-to-navigate user interface * New design with a slim, sleek, case that fits in the palm of your hand * Stores custom tunes, from third party dealers, using DiabloSport's CMR tuning suite * Store multiple tunes on device * Monitor and log up to 16 plus vehicle parameters * Reads/clears diagnostic trouble codes * USB connection for updates and downloads * Offline drag and drop tune installation

2.2 out of 5 stars ( 5 )

$532.95

—

$562.95

Hughes Performance Muscle Car Transmission Packages

Hughes Performance Muscle car transmission packages are designed and built to give customers the option to choose the transmission and converter package best suited for their needs. The transmission packages come complete with everything you need—transmission, converter, transmission cooler, transmission fluid, and more. So, whether you have a radical cam in your hot rod, or need to haul or tow a heavy load, Hughes Performance offers high-quality transmission packages to match your application needs. Note: Contents of kits vary based on transmission type and your vehicle.

5.0 out of 5 stars ( 1 )

$4,134.99

—

$5,061.99

RAM Truck Pulling Custom Order Clutch Kits

RAM truck pulling clutch kits are custom-assembled for your specific application. These units feature a heavy-gauge steel cover with welded spring guides and a steel pressure ring. Flywheels are available in 30 or 40 lb. weights, as well as in billet aluminum. The clutches can be set up with either 5135 or 5191 compound iron discs with 1 to 10 splines. Single disc slipper-style clutches can be used with engines producing up to 800 hp, or where very limited slipping is desired. These clutches utilize the same quality components as the RAM dual disc pulling clutches. These units can be assembled with your choice of sintered iron disc materials and flywheel weights. Dual disc clutches will allow a more controlled slip as the vehicle comes out, without severe wear or every-round maintenance. Dual disc clutches are built to fit different stock depths or deep bellhousings.

3.0 out of 5 stars ( 2 )

$1,849.99

—

$2,299.99

Ranger DST2420 Wheel Balancers

Ranger DST2420 wheel balancers are highly accurate and dependable, featuring proprietary digital sensor technology for critical reliability and repeatability. They're built with a gritty toughness that guarantees perfectly balanced wheels day after day, around the clock. Like all of the DST Series wheel balancers, these units feature a proven direct-axis drive system--accurate to within hundredths of an ounce, ensuring that your wheels are balanced and vibration-free. The Ranger DST2420 balancers automatically calculate the exact weight needed to achieve optimal balance for almost every tire and wheel configuration on the planet; and brightly displayed LEDs mark the exact amount and location in just six seconds. A full menu of time-saving features--including dynamic, static, and performance alloy settings--allows you to balance OEM wheel configurations and performance wheels with minimal effort and speed.

5.0 out of 5 stars ( 1 )

$3,295.00

American Racing VN506 Mag Gray Wheels with Polished Lip

As part of American Racing's Heritage Series wheel lineup, the VN506 Mag Gray wheels with polished lip offer a stylish and time-honored rallye design with a touch of modern edge. Each rim is built from one-piece cast aluminum alloy to ensure superb strength, performance, and durability without excessive weight. The VN506 wheels' unique spoke pattern, mag gray finish, and polished lip accent gives a knockout look to your vehicle. They're available in a variety of bolt patterns, diameters, and offsets—and include a polished rally center cap.

5.0 out of 5 stars ( 4 )

$255.99

—

$425.99

FTI Performance ESR Series Torque Converters

FTI Performance ESR Series torque converters are designed for mildly modified vehicles. They're built using Torrington bearings, race-prepped sprague hardened impeller hub, hardened turbine hub and splines, a new steel pilot, and laser-cut mounting ring. These units are available in a variety of sizes, advertised flash stall ratings, and numerous other options. Order the torque converter recommended for your transmission application.

4.63 out of 5 stars ( 65 )

$1,059.00

Ranger 10-Ton Long Frame Floor Jacks

Ranger 10-ton long frame floor jacks are designed for extreme lifting. These hydraulic jacks will safely lift vehicles up to 23 in. in the air, with a weight capacity of up to 20,000 lbs. They're perfect for servicing truck fleets, buses, farming or heavy construction equipment, and other vehicles that require access to very low areas. Additional features include an alloy-plated ram, a safety overload system (to prevent sudden collapse), and heavy-duty swivel casters for easy maneuvering in tight spaces. The pump handle can also be locked in 3 different towing positions, and the foot pedal control makes setup and lifting a breeze. Built to last from durable heavy steel, Ranger 10-ton long frame floor jacks offer a long lifting life that won't let you down.

Not Yet Reviewed

$1,725.00

Ranger Professional Spray Wash Cabinets with Skimmer

Ranger professional spray wash cabinets with skimmer will degrease even your filthiest car parts in no time flat. They feature a 50 gallon tank capacity, with larger solution tank to make them even more versatile and productive. An octagonal full-opening door increases access to the turntable to enhance the operator's loading capabilities. Simple operating controls, stainless steel nozzles, a gasket-free door, and a large 70 gpm pump demonstrates Ranger's commitment to enhanced performance and productivity without a single sacrifice in quality. Like all Ranger spray wash cabinets, these professional units with skimmers are built to last. Cabinets and doors are constructed with heavy-duty 12-gauge steel and then coated with an industrial two-step primer and polyurethane finish.

Not Yet Reviewed

$9,695.00

Ranger RS-750DS Parts Washers

The Ranger RS-750DS parts washers have a 53-gallon tank and come with the latest features for rapidly degreasing the biggest car parts around—making it the ultimate answer to degreasing car parts of any shape or size. Built to last, these stainless steel spray wash cabinets allow for more space to fit more parts in at a time. With the extra room, you can clean and degrease automotive parts faster than ever before! Features and specs: * 53-gallon tank with heavy-duty stainless steel construction and powdercoat finish to resist rust * Commercial-grade pump/motor combination provides washing power—made of high-quality parts like the rust-resistant stainless steel impellers—while the centrifugal pump does all the heavy lifting (a protective covering comprised of 100 percent ductile cast iron and silicon carbide seals keep the machinery inside safe and dry) * Wash cabinet is sealed with a leak-proof neoprene door—creates an edge-to-edge seal and prevents water and steam from escaping to create better water retention which improves cleaning efficiency * Heated cabinet with adjustable set point thermostat allows you to adjust the heating range up to 175 degrees F * Safety switch and timer dial for a functional machine that is both safe and efficient * A nickel-based, alloy-sheathed heater element is specifically designed for heated parts washing—ensures that your parts washer is hot and ready to go at the press of a button * Contamination-proof interior welds prevents even microscopic debris from getting into the recirculating tank to help ensure nozzles and pumps remain unclogged, redirecting unwanted debris to the trap and filter * Stainless steel nozzles are resistant to wear and clogging—sprayer nozzles have a sharply articulated spray grid to provide a powerful wash, blasting away dirt and grime * Full opening octagonal door and stainless steel handles * Dual water heaters for quick startup—water temperature is raised within seconds thanks to the dual water heaters that keep water primed and ready at all times * High-power spray jets clean parts fast—attacks dirt and grime from all angles, ensuring an even powerful wash * Automatic low water shutoff feature cuts the power when the water level gets too low, saving your dual heaters from any potential damage—switch is made from an industrial-grade stainless steel float located in the detergent tank that rises and falls with the water level * Stainless steel oil skimmer—separates oil and grime from the water which further increases the longevity of your detergent solution (oil is directed outside the cabinet into a holding container for disposal) * Removable tree rack and components basket is essential for small parts and for maximizing parts washing space, the tree rack installs and removes easily instantly extending tank space and provides space for smaller parts like bolts, nuts, and screws * Convenient tank drain pipes help you maintain your spray wash cabinet by preventing debris from accumulating on the bottom * Moveable filter basket traps any particle larger than 1/8 in., so you can be sure that your tank water remains free of any build up that could cause harm and can be easily removed to gain access to the cleansing tank for maintenance * Non-marring casters make maneuvering even this bulky piece of equipment a breeze and the urethane casters ensure that your floor remains safe * Convenient drain tank—large built-in pipe drains that redirect and remove sludge from the parts washer floor, which helps keep the washer clean and functioning smoothly * A friction-drive turntable is the system behind the parts washer, and it cuts out the risk of motor damage by preventing jams that might otherwise occur within the cabinet and tank

Not Yet Reviewed

$15,895.00

TCI PRO-X Torque Converters

These TCI PRO-X torque converters are designed specifically for Top Sportsman, Top Dragster, and Outlaw Street Car classes. Able to handle 2,500+ hp applications (including multi-stage, nitrous-assisted, supercharged, and twin turbocharged engines), these high-strength torque converters feature a TCI exclusive--HDT (Heat Dissipating Technology) Coating--further enhancing their ability to deliver unsurpassed consistency and durability. Features include: * Hand-built steel stator * Forged mounting cover * 3 sets of heavy-duty internal bearings * Furnace-brazed turbine and pump assembly * Built for GM, Ford, and Chrysler transmissions * 4 or 6-bolt flanges and optional billet front available

Not Yet Reviewed

$1,794.95

Moser Engineering Semi-Float Custom Order Alloy Axles

These NHRA and IHRA-accepted premium alloy axles from Moser Engineering are custom-built specifically for your vehicle. They are induction heat-treated to optimize torsional strength, and then 100 percent magnafluxed. That gives the axles the strength of a race-only application at a high performance, street axle price. Complete the above Instructions to collect the specs needed or call us for expert assistance. They are shipped directly from the supplier, so shipping times may vary. Moser can make any axle for your needs, whether you have a difficult-to-fit rear-end setup or you need your axle shortened and re-splined. They come available with a press-fit or screw-in stud axle flange and a choice of stud diameters. Studs are not included. All Moser axles are custom-made. Call 1-800-230-3030 for more information. Non-Returnable; obviously, each axle is custom and built to order. Prices may vary depending on chosen options. Get the axles you need from Moser and Summit Racing ®. All custom-order axles are Special Order and Non-Returnable.

5.0 out of 5 stars ( 15 )

$243.00

—

$635.00

GearStar GM 200-4R Level 2 Transmissions

GearStar offers Level 2, 3, and 4 GM 200-4R performance transmissions, custom built by one of their master technicians from start to finish, then dyno tested with converter to the equivalent of 100 miles, ensuring the transmission and converter package is in perfect operating condition before leaving their facility. GearStar GM 200-4R Level 2 transmissions deliver improved performance, a straightforward installation, and a surprisingly affordable price tag. A great replacement for an older 2-speed Powerglide or a 3-speed Turbo Hydra-Matic, you don't have to make major adjustments, plus the fourth gear lets the engine rotate at a lower rpm, reducing fuel consumption and wear and tear on the drivetrain. You can also change the larger rear axle ratios without affecting street-ability. Features and specs: * 400 hp and up to 400 lb.-ft. of torque * Stall: 1,800 to 2,400 * Master overhaul kit with high-energy frictions and new steel plates * Wide carbon fiber intermediate band * Transgo recalibration shift kit * New valve body separator plate * Original equipment-style filter * High-capacity servo * New Torrington bearings * Bushing kit * Thrust washer kit * High-capacity 10-vane pump assembly with new rotor and slide * Hardened stator shaft * New vanes and hardened rings * 0.500 boost valve * Updated pressure regulator valve * Extra-capacity direct drum assembly * Hardened sun shell * Reinforced forward drum assembly * New speedometer drive gear * New speedometer driven gear * Vacuum lock-up system * Installation kit: -- Universal fill tube and stick -- Universal throttle valve pressure cable -- Universal transmission mount -- Universal converter cover (plastic)

Not Yet Reviewed

$6,745.00

Ranger RL-8500 Brake Lathes

The revolutionary Ranger RL-8500 combination brake lathes use independent DC servo motors to control the cross feed and spindle feed drives, eliminating the need for complex mechanical gear boxes and transmissions typically found on mechanically-driven lathes. The ruggedly built RL-8500 brake lathes are capable of faster, easier, and more accurate rotor/flywheel and drum/flywheel resurfacing than any other brake lathe in its class. Infinitely adjustable feed rates allow you to easily modify cut speeds with the simple turn of a dial. Now you can reduce or increase the cut time for the best finish results, whether you're speeding through an initial rough cut or a single-pass micro-finish. These Ranger lathe packages include the lathe, a sturdy bench and large tool storage backboards, so you can hang all your adapters within close reach. One of the common problems that plague other brake lathes is the vibration and chatter transfer that directly affects the tool-tip and leaves an imperfect cut on the machined surface. The RL-8500 brake lathes by Ranger are specifically designed to address this issue by eliminating the need for gear-driven mechanical drives and variable-speed transmission devices.

Not Yet Reviewed

$11,395.00

On Sale

UniSteer Rack and Pinion Conversion Kits

From the people who doing steering right--UniSteer rack and pinion kits deliver the feel and performance of precision. Their conversion kits are well-engineered and built to match the factory suspension, so installation is easy and performance is assured. UniSteer bolt-on rack and pinions are offered in both manual and power kits to fit your application needs. When you want to improve handling, reduce effort, and enhance responsiveness of your driving experience in your classic ride, turn to the experts at UniSteer for a rack and pinion conversion kit. UniSteer stands behind their products with a 2-year, Unlimited Mile Warranty.

3.8 out of 5 stars ( 10 )

$2,683.99

$2,415.59

Roadster Shop SPEC Chassis Kits

Roadster Shop SPEC chassis kits offer Roadster Shop quality at an affordable price point. The SPEC Series is an engineering-focused approach, using the latest in manufacturing technology, to build the lightest, strongest, and easiest-to-install complete chassis systems. These technologies have been used to streamline procedures resulting in lower cost and shorter lead times. The SPEC independent front suspension is engineered to deliver outstanding performance in a user friendly package. It features proprietary suspension geometry designed to provide the best balance of ride quality and performance in its class. Available as On-The-Shelf, pre-configured chassis or custom specifications to suit your needs. Features and benefits of Roadster Shop SPEC chassis kits include: * Full-chassis performance at a smaller component price * Unparalleled quality * Add the strength of a full frame with no floor modifications on most applications * CNC laser-cut, TIG-welded, and contoured "Laser Rails" frame rails * No kinks, bends, or stressed areas that are prone to flex like mandrel-bent tubing * Stronger, lighter, and more precise * CNC-located factory mounts built into the frame for easy, vehicle specific installation * Frame rails accommodate mini-tubs and wider wheels * Aggressive ride heights for the modern pro-touring look * Choice of coilover or air suspension for many applications * Air suspension chassis will lay the rockers on the ground (varies with tire size) * Truck rear frame rail kick ups engineered for minimal bed modifications while allowing rockers to lie on the ground * Crossmembers and chassis bracing allow 3 in. exhaust * Adjustable, drop-out transmission mounts (tunnel mods may be necessary for larger T-56 and 4L80 transmissions) * Vehicle specific body (cab and bed on trucks), bumper, and core support mounts * Single-adjustable billet coilovers * Power rack and pinion steering * Easy-to-adjust upper A-arm eccentric mounts for fast and accurate alignments * Wilwood Pro Spindles * Parallel 4-bar rear suspension * Ford 9 in. housing with 31 spline axles * Optional mounts, coilovers, sway bars, brake packages, and rear-end gearing available on custom-order chassis * 5 x 4.75 wheel bolt pattern * Frames are shipped as bare steel

4.21 out of 5 stars ( 14 )

$13,763.99

—

$15,470.99

GearStar GM 6L80E Level 4 Transmissions

GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 6L80E Level 4 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 750 hp (GS6L80L4) 650 hp (GS6L804X4L4) * Master overhaul kit with gaskets, seals, rings, and pistons * New wide inlet filter * New bearing kit * New bushing kit * Expanded capacity clutch packs using the latest generation friction and steels: -- 3-5 reverse clutch pack -- 1-2-3-4 clutch pack -- 4-5-6 clutch pack -- Low/reverse clutch pack -- 2-6 clutch pack * Updated ACDelco pump cover (stator support) * New ACDelco pump body (bellhousing) * New pump vanes with hardened rings * Billet pump rotor * Billet 4-5-6 clutch hub * Hardened rear planetary assembly * Upgraded line boost valve and slide spring * Performance tuned valve body * New ACDelco transmission control module and solenoid body * Hardened and reinforced clutch hubs

Not Yet Reviewed

$9,745.00

—

$10,245.00

184 Results Found For "built"