Availability
Fittings & Hoses
Showing In Stock Items. Show All 37 Items.
On Sale
Earl's Performance Weld-Less Fuel Return Fittings
Earl's Performance weld-less fuel return fittings install just like rivet nuts, eliminating the need to access the inside of the tank or cell. Just drill a hole, install return tube, insert the fitting with the rubber washer, and tighten the bolt! The fitting collapses or "mushrooms" from the underside, securing it to the tank and creating a perfect seal to the tank mating surfaces. They are machined from 6061 billet aluminum and tested with tank material thicknesses up to 1/8 in. (0.125 in.). Each Earl's kit includes an oversized Viton® fluorelastomer rubber sealing washer, hex head screw with steel washer, -6AN low-profile port plug with Viton® O-ring, and two tube options--fixed and flexible nylon. Additional features: * Accommodates 6AN, 8AN, 5/16 in., or 3/8 in. hose barb adapters (sold separately) * Integrated 3/8 in. hose barb feature effectively routes returning fuel below surface level * Eliminate overhead splash * Maintain consistent fuel pressure by keeping air out of fuel system * Knurled ribbed body helps prevent rotation * Suitable for pump gas and E85 * Compatible with steel or aluminum tanks up to 1/8 in. thick * Installs on flat horizontal surfaces mounted on top of tank
( 7 )
$49.95
$44.96
JOES Racing Products Water Neck Outlets
JOES Racing Products water neck outlets are compact and lightweight. These aluminum units have a no. 16 or no. 20 fitting for your radiator hose, and the base has an O-ring for sealing to your intake manifold. JOES also offers a ported version designed with two 3/8 in. NPT ports for additional water lines.
( 1 )
$89.95
Summit Racing Equipment® Heater Hose Kits
These Summit Racing Equipment® heater hose kits are designed to connect your heater core to your intake manifold and water pump. They include a 10 ft. section of 5/8 in. diameter rubber hose, four stainless steel worn gear clamps, two brass adapters and four hose mounting clamps.
( 9 )
$42.99
On Sale
Aeromotive PTFE Stainless Braided Fuel Lines
Aeromotive PTFE stainless braided fuel lines are ideal for street and racing applications where E85, gasoline, or methanol compatible fuel hose is needed. The stainless outer braid provides impact and abrasion resistance to protect the PTFE inner liner. These liners are specially carbonized for conductivity, which is critical for fuel handling. The fuel lines provide outstanding flow capacity; they're smaller on the O.D. for the same I.D. of a comparable rubber braided line for easier routing in tight spaces. The lines deliver extended service life in any fuel, as they will not harden, micro-fracture, or permeate fuel vapor (vapor-walk) like normal rubber braided line—minimizing fuel smell in the vehicle storage area. Choose the length and AN diameter needed for your application.
( 9 )
$185.01
—
$289.33
$166.51
—
$260.40
JOES Racing Products Weld-On Bung and Cap Assemblies
JOES Racing Products weld-on bung and cap assemblies include non-vented anodized caps that are lightweight, O-ring sealed, and easy to grip. The female threaded bungs are bare 6061-T6 aluminum, so you can weld them to your fuel, oil, or water tank. These assemblies are available for fitment in multiple sized openings.
( 1 )
$44.95
—
$52.95
JOES Racing Products Temperature Gauge Manifolds
JOES Racing Products temperature gauge manifolds assist with measuring the temperature of oil, water, or any liquid. Machined from aluminum and anodized red, JOES temp tees are available to fit different tubing sizes, with 1/2 in. NPT threads for the gauges' probe adapter fitting and two 1/4 in. mounting holes.
( 5 )
$56.95
—
$56.99
JOES Racing Products Oil Inlet Fittings
JOES Racing Products oil inlet fittings feature an AN fitting on one side and NPT on the other. The fittings are machined from aluminum and then given an anodized finish for added durability. They're offered in a choice of ported and non-ported configurations to better suit your needs. The ported inlet fittings are designed with two ports to supply oil for your valve spring oilers. The non-ported fittings are available in various lengths and threads. Get the right fit for your oil inlet with JOES oil inlet fittings.
( 1 )
$29.95
—
$29.99
JOES Racing Products Oil Pressure Fittings
JOES Racing Products oil pressure fittings make it easier to connect the line to your oil pressure gauge with their extended design. These adapters are not only functional, but great looking, as well! They're machined from aluminum, red anodized for added durability, and are marked with the JOES Racing logo. Order the fitting size designed to fit your application.
( 1 )
$18.95
—
$18.99
Earl's Performance Fuel Rail and Fuel Module Quick-Connect Fittings
Earl's Performance fuel rail and fuel module quick-connect fittings provide an easy way to upgrade to billet fuel rails or an in-tank fuel module. They feature stainless steel and aluminum construction—as well as time, money, and effort savings by allowing you to retain your stock OEM-style fuel hose. These 90 degree adapters have -8 AN O-ring boss port fittings on one end, and the OEM-style 5/16 in. or 3/8 in. fuel rail-style connection on the other end. Order the size needed for your application.
( 3 )
$41.81
On Sale
Haltech Weld-On Fitting Kits
Haltech offers a variety of data acquisition components and accessories to facilitate automotive performance and engine management. These weld-on fitting kits enable you to make secure connections when plumbing key paths for the data streams. The 1/4 in. fittings are machined from mild steel or stainless steel and include a nut and ferrule. Weld-on bungs/fittings and brass nut/ferrule are also available separately. Note: Compression ferrules are single use and must be replaced when replacing probes.
Not Yet Reviewed
$21.00
$20.00
JOES Racing Products Weld Bungs
JOES Racing Products weld bungs are made from 6061-T6 aluminum. These versatile female pipe thread accessories can be welded into any aluminum tank or component that needs a fitting—and the bungs are available in a variety of the most common sizes. No matter what racing circuit you drive, there's always an occasional need for weld bungs. Keep a supply on hand from the industry's trusted source: JOES Racing Products!
( 1 )
$7.95
—
$19.61
JOES Racing Products Carburetor Fittings
Fittings you can get a grip on--JOES Racing Products carburetor fittings are designed to make your job easier and your engine bay look better. Crafted from lightweight, strong aircraft aluminum, JOES fittings have the hex moved down to where you can actually get a wrench on it. They are beautifully anodized red (#6) and blue (#8) to give your application style. Take hold of your project with great looking JOES carburetor fittings.
( 1 )
$34.99
Nitrous Outlet Fuel Tank Feed Bungs
Tap into your fuel supply to feed your nitrous craving with Nitrous Outlet fuel tank feed bungs. Made from brass and finished with nickel plating, Nitrous Outlet fuel tank feed bungs are screened to help keep debris out of your engine. Their compact design, barbed end, and included PTFE washers make for a trouble and leak-free installation.
Not Yet Reviewed
$17.99
JOES Racing Products Weld-In Chassis Bungs
JOES Racing Products weld-in chassis bungs work great for mounting components to tubing that need a little more strength. The fittings are machined from 1018 steel and are available in a variety of diameters and thread sizes.
Not Yet Reviewed
$32.95
—
$32.99
Mishimoto Powersports Silicone Hose Kits
Mishimoto powersports silicone hose kits are made out of high-grade silicone, combined with heat-resistant embedded fibers, and engineered for a direct OEM fit. These silicone hose kits add function and style to your ride by providing increased pressure tolerances and heat reduction. Plus, they are available in black, blue, red, and green.
( 1 )
$50.95
—
$90.95
Russell Speed Bleeders
Russell speed bleeders let you bleed the brake lines on just about any vehicle all by yourself. Just replace the old bleeder screws with speed bleeders. They have an internal check valve that will pump excess air and fluid out for you. A special coating on the speed bleeders' threads keep them from admitting air into the system, and keep expelled air and fluid out. When you're done, just tighten the screws and go on to the next brake cylinder.
( 269 )
$17.95
BikeMaster Replacement Crush Washers
Each time you change the oil on your motorcycle, you should also place a new crush washer on your oil drain plug. Otherwise, you risk unwanted leaks--or possibly over-tightening the bolts and stripping the pan threads. Bikemaster replacement crush washers are machined from a softer metal to provide a tight seal. They're available in various hole sizes and are sold in packages of 10. For the cost of a soda pop, it's amazing the number of headaches that one small crush washer will save you!
Not Yet Reviewed
$7.99
JOES Racing Products Micro Sprint Temperature Gauge Fittings
JOES Racing Products Micro Sprint temperature gauge fittings set you up to monitor your engine temperatures—before expensive engine damage can occur. These anodized aluminum fittings easily connect to your rubber hose water line, or your -12 AN threads on the other end. Their threaded port fittings match up to your standard temperature sensor for a speedy installation.
Not Yet Reviewed
$59.95
JOES Racing Products Expansion Plug Fittings
Replace freeze plugs in your engine block with JOES Racing Products expansion plug fittings. They're designed to install in place of your freeze plug and allow you to connect a separate hose to change the flow of your coolant. The fittings are made from durable aluminum and then red anodized for protection.
Not Yet Reviewed
$26.99
JOES Racing Products Radiator Overflow Fittings
JOES Racing Products radiator overflow fittings act as a signal to the driver indicating a possible overheating condition, as the cooling system pushes out water. With threaded bodies and nuts, these overflow fittings mount in a body panel outside the drivers compartment and are available with a 1/4 in. barb or a -4 AN male fitting.
Not Yet Reviewed
$17.95
JOES Racing Products Reducer Fittings
JOES Racing Products reducer fittings adapt your standard gauge port to 1/8 in. NPT. These anodized aluminum fittings are supplied with 1/8 in. NPT plugs—and can be used to plug existing gauge ports in JOES thermo spacer.
Not Yet Reviewed
$13.99
Helix Racing Products Carburetor Fuel Lines
Helix Racing Products carburetor fuel lines provide superior protection from abrasions and kinks, tears, oxidation, and chemical resistance. These premium opaque polyurethane fuel lines will not get hard and are available in a variety of sizes and colors. Helix carburetor fuel lines are not to be used with fuel containing more than 10 percent alcohol.
( 3 )
$11.99
—
$15.99
On Sale
Haltech Weld Fittings
Haltech offers a variety of data acquisition components and accessories to facilitate automotive performance and engine management. These weld fittings enable you to make secure connections when plumbing key paths for the data streams. The fittings are machined from aluminum and are available popular sizes.
( 2 )
$17.99
$16.00
Russell Push-On EFI Fittings
Russell push-on EFI fittings are precision-machined to ensure outstanding thread engagement. The aluminum adapters are available in various finishes, sizes, attachment styles, and configurations to fit OEM hard lines. Some models are quick-connect and/or swivel. They're designed for a positive seal, even at maximum operating pressures. Plumb your electronic fuel injection system with quality accessories from Russell Performance!
( 145 )
$31.99
—
$41.99
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster