Availability
Showing In Stock Items. Show All 268 Items.
JOES Racing Products valve cover fasteners help you to remove and replace your valve covers more efficiently. The spring ball on your extension holds the fasteners, so you can easily get them to the stud. These handy stud/accessories are great looking with an anodized finish (black is 1/4 in.-20, red is 1/4 in.-28), and are available in sets of different quantities.
( 5 )
$29.95
—
$56.95
Is your transmission or rear-end vent line blowing oil? Sounds like you could use one of JOES Racing Products' vent tanks to remedy the situation. They're offered for 1 1/2 in. or 1 3/4 in. tube mounting and flat sheet metal mounting. These units are equipped with a filter to keep dirt out of your lubricant, and 1/4 in. NPT pipe threads or an -8 AN at the bottom for your vent line.
( 20 )
$74.95
—
$129.95
Keep your valvetrain running smooth. COMP Cams High Energy hydraulic roller lifters are for use with the newly designed hydraulic roller cam series, or as performance replacements for stock hydraulic roller lifters. You must be certain that the lifters are correct for the type of block used.
( 73 )
$38.95
—
$80.95
K&N premium oil filters for powersports vehicles utilize an innovative, highly efficient synthetic-blend filtration media designed to be compatible with synthetic, petroleum-based, and blended oils, including the high concentrations found in synthetic racing oils. The heavy-duty canister is engineered to be exceptionally durable, and a 17mm welded hex nut can be used for quick and easy filter removal. Engineered to support exceptionally high flow rates while providing outstanding protection from harmful engine contaminants, each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers. For a high-performance design with outstanding filtration, order the K&N premium powersports canister oil filters best suited for your application. More product features include: * Pleated synthetic-blend filtration media * Pre-drilled nut for safety wire attachment * Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength * Designed to operate with all synthetic, conventional, and blended motor oils
( 94 )
$8.50
—
$17.99
With S&S Cycle's wide selection of Harley-Davidson® parts, you're sure to find the parts you're looking for, including head bolt kits. These kits include steel 12-point head bolts and washers that are designed to exceed the needs of your high performance engine.
( 1 )
$102.95
—
$199.95
These UNI Filter push-in crankcase breather filters are made of a washable urethane that needs no oil or special cleaners. A clogged breather can cause gaskets and seals to leak, while reducing horsepower and responsiveness. Easily increase your engine performance and longevity by adding one of these UNI Filter push-in crankcase breather filters to your machine.
( 3 )
$18.99
Hot Cams valve shims will work with OEM cam adjustments, as well as hot cam adjustments. They are made from 4140 cold rolled steel and are available in several thicknesses and diameters. Hot Cams valve shims are a must for any powersports application to keep it running at full power.
( 6 )
$89.99
—
$114.99
FilterMAG MC/SC series magnets are geared toward the motorcycle industry. They feature a polished chrome or flat black facing to fit the individual needs of the discriminating bike owner.
( 5 )
$84.99
MotoRad crankcase breather caps provide the oil circulation and air ventilation that your engine needs to run properly. Made from heavy-duty steel, MotoRad caps perform well under pressure. Many of these direct fit, high-quality crankcase breather caps are given a zinc plated finish for optimal rust resistance. Get replacements that perform and fit like the originals--MotoRad crankcase breather caps.
( 2 )
$4.99
—
$9.99
S&S Cycle billet oil pumps are designed and built for your V-Twin. They feature a smoother design from beautiful strong billet and pressure relief towers that are .300 in. shorter than your OEM oil pump. Kits may include: * Pump with cover * Mounting bolts * Supply and return gears * Driveshaft with keys and snap rings * Check ball and spring * Pressure relief valve and spring * Check ball and release valve cover screws with O-rings * Miscellaneous hose fittings, plugs, screws, and gaskets
Not Yet Reviewed
$499.95
Easily installed, easily removed--S&S Cycle Quickee adjustable pushrods are designed for a simple, trouble-free installation that does not require removal of the gas tank, rocker assemblies, or even the rocker box cover! Innovative Quickees feature threaded adjusters that screw into the pushrods until the threads disengage and the adjuster simply slides into the pushrods, making your installation or removal easy. Then, once the pushrods are installed and adjusted, the locknut keeps the adjuster from moving. They will work with stock and aftermarket cams, as well as stock pushrod covers. S&S proven performance makes life easier with their Quickee adjustable pushrods.
( 1 )
$209.95
—
$336.95
ARP Pro Series cylinder head studs are cold-forged to ensure molecular integrity. They're heat-treated prior to thread rolling and machining. ARP Pro Series kits are also available with 12-point nuts, and all studs come complete with hardened parallel washers for an even load distribution and accurate torque readings. With hundreds of models ready to ship, these cylinder head fasteners can be ordered for virtually any style engine.
( 798 )
$218.99
Let your engine breathe with JOES Racing Products valve cover breather tubes. They're available in aluminum or steel and each tube has two baffles to keep oil from splashing into the filter. Your engine will breathe--and perform--better when you weld JOES Racing breather tubes to your valve covers.
Not Yet Reviewed
$16.95
COMP Cams twin cam Thumpr camshafts are designed as a serious performance upgrade with hard-hitting sound! They feature an aggressive design that provide a thumping exhaust note and they provide a great performance upgrade to any 103 cu. in. and larger twin cam engine. The cams feature a sophisticated "Endurance Ramp" lobe design that makes great power but is easy on the tappets and valve train for long life. They feature a wide power band and pull great up to 5,400 to 6,400 rpm dependent upon the camshafts selected, and engine combination. The cams are made from 8620 billet steel and have been shown to make greater gains in power, acceleration, and throttle response when tested with larger throttle bodies. Put more power to the ground, and make some noise with Comp Cams twin cam Thumpr camshafts.
( 1 )
$243.95
MotoRad produces these oil filler caps for nearly every domestic and import vehicle on the road today. MotoRad is the leading supplier of oil filler caps for both the original equipment market and the automotive aftermarket, ensuring you of a quality product.
( 1 )
$2.99
—
$11.99
Why use ARP main cap studs for your motorcycle or UTV? They're machined from 8740 chromoly steel, heat-treated to 190,000 psi tensile strength, and precision J-form thread-rolled to create fasteners with the strongest threads available. The studs eliminate main cap walk and fretting—and offer the ability to obtain more accurate torque readings, easier engine assembly, and the proper alignment of caps. Order the set recommended for your powersports machine!
Not Yet Reviewed
$183.99
S&S Cycle breather reed valve assemblies improve oil scavenging and reduce oil carryover. Plus, they'll make your bike run better. The steel breather reeds of these valve assemblies are normally closed. As they open and close again during the stroke cycle, a slight vacuum is maintained in the crankcase, greatly improving oil scavenging. Enjoy your riding experience even more after you install S&S Cycle breather reed valve assemblies.
Not Yet Reviewed
$165.95
S&S Cycle cylinder studs are the perfect replacement for your OEM or S&S cases. These steel head studs are black oxide coated and strong enough to use on the largest of V-twin engines. So next time you do a top end on your Harley-Davidson®, update those head studs with S&S cylinder studs.
( 1 )
$99.95
These UNI Filter clamp-on crankcase breather filters are made of a washable urethane that needs no oil or special cleaners. A clogged breather can cause gaskets and seals to leak, while reducing horsepower and responsiveness. Easily increase your engine performance and longevity by adding one of these UNI Filter clamp-on crankcase breather filters to your machine.
( 9 )
$18.99
Mahle Original oil filters reliably prevent contaminants from entering the lubrication system and maintain oil quality, as well as the performance and efficiency of your engine. They are available in several shapes and styles to meet all your needs. Order the filter designed for fitment on your vehicle.
( 7 )
$5.99
—
$15.99
K&N Powersports oil filters are designed to satisfy the needs of racers and engine builders as well as the average motorcycle or ATV owner who wants the best oil filter available. These filters trap harmful contaminants while their design allows for high oil flow rates. They are covered by K&N's limited warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturer's recommended service intervals. For a high-performance design with outstanding filtration, order the K&N Powersports cartridge oil filters best suited for your application. More product features include: * High-efficiency media with uniform pleats * Ideal for high-end synthetic motor oil
( 27 )
$7.50
—
$15.99
ARP Powersports engine and accessory bolt kits contain professional-quality fasteners. They're manufactured with premium materials and finishes that are nominally rated at 180,000 psi tensile strength—superior to OEM bolts and better than hardware grades. Motorcycles run at very high rpms and put tremendous stress on lightweight parts. The task is holding your engine and accessories together during those times. ARP Powersports fasteners are a convenient and easy way to assemble your engine with confidence, knowing that ARP is up to the challenge. Choose the kit designed for your specific bike.
( 1 )
$91.99
S&S Cycle standard adjustable pushrods help to assure consistent valvetrain operation under all conditions. The pushrods are made from rigid chromoly steel tubing and offer a simple, trouble-free installation. You can purchase just the pushrods or as a set with pushrod covers, O-rings, and cover keepers. Replace the stock, non-adjustable pushrods in your stock or high performance application with S&S Cycle standard adjustable pushrods, available for a wide range of Harley-Davidson® bikes from 1984 and up.
( 1 )
$174.95
—
$249.95
S&S Cycle roller rocker arms were designed for superior strength and to eliminate the failure-prone stress areas found in other rockers. These replacement arms are forged from 8620 steel, heat-treated, and then shot-peened for additional strength. They feature 3/4 in. long bronze bushings, compared to the more common 1/2 in. long bushings or needle bearings. S&S Cycle roller rocker arms are available in 1.500:1 ratio, 1.625:1 ratio and 1.725:1 ratio. Order the set recommended for your bike model.
Not Yet Reviewed
$611.95
—
$652.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
