Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Summit Racing™ Direct-Fit LED Headlight Assemblies and Components
If you're looking to convert over to LED headlights in your classic car or truck, Summit Racing™ direct-fit LED Headlights bulbs will help you see the light. Available with options that include sealed or unsealed, round or rectangular, and single or dual-beam capabilities, you're sure to find what you're looking for. Add some modern capabilities to your favorite ride with the Summit Racing™ direct-fit LED headlights best suited for your application.
( 101 )
$79.99
—
$199.99
Summit Racing™ Premium EFI Intake Manifolds
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 87 )
$199.99
—
$339.99
Summit Racing™ Hydraulic Roller Lifters
Summit Racing™ hydraulic roller lifters are designed with two things in mind: High quality and affordability. We think you'll be happy with the results. These lifters are made to fit your OEM hydraulic roller camshaft engine with no modifications.
( 6 )
$199.99
—
$251.99
Summit Racing™ Hydraulic Lifters
Summit Racing™ hydraulic lifters are designed with two things in mind: High quality and affordability. We think you'll be happy with the results. These lifters have a lengthened plunger, designed for less wear and to provide precise oil control through 6,000 rpm.
( 219 )
$7.99
—
$143.99
Summit Racing™ Blueprinted HEI Distributors
Get more power from a high-energy ignition than you ever expected with a brand new Summit Racing™ blueprinted HEI distributor. They feature a 50,000 V coil, medium weight advance springs, and an aluminum housing. The distributor shafts are guided by precisely aligned bushings for durability in extended street use, and most models include an adjustable vacuum advance. Separate advance springs are available, so you can fine-tune to your hearts content. Be in it to win it—with the Summit Racing™ blueprinted HEI distributor designed to fit your application.
( 1256 )
$112.99
—
$344.99
On Sale
Summit Racing™ Cast Iron Cylinder Heads for Small Chevy
Think you have to scour the local bone yards to find a decent set of GM's old double hump or fuelie cylinder head castings? Not true. In fact, we've brought back classic Chevy performance in a big way with these ready-to-run heads for small block Chevy. Our versions of the popular GM cylinder heads offer great performance for less than it would cost to rebuild an old set of double hump castings.
( 130 )
$649.99
$499.99
Summit Racing™ Classic Cam and Lifter Kits
From low-end torque to top-end horsepower--and everything in between--one of our Summit Racing™ Classic cam kits has you covered. These power-building kits include a hydraulic camshaft, lifters, and assembly lube.
( 464 )
$239.38
—
$329.98
Summit Racing™ Classic OEM Radiators
Summit Racing™ classic OEM radiators are designed to give you top performance cooling, while fitting your vehicle's mounts, so your ride can have a new radiator without having to modify brackets and fittings. The radiators are available in various styles and sizes to best fit your application or engine bay design.
( 488 )
$281.99
—
$747.99
Summit Racing™ Automatic Transmissions
Summit Racing™ Automatic Transmissions combine quality and economy to offer replacement transmissions in many styles and options. These units are remanufactured with all-new clutches, thrust washers, seals, bushings, and high-energy bands, along with other "failure prone" hard parts depending on unit. Other features include a rebuilt front pump, a valve body with shift for street and performance and high-quality seals and gaskets. You get all these impressive upgrades, along with reliable performance and extreme value. All transmissions are Dyno tested before they're shipped. Order the model recommended for your vehicle.
( 65 )
$1,849.99
Summit Racing™ Brake Rotors
There's a lot riding on your brakes, so as part of your regular maintenance, replace worn or damaged rotors with these quality upgrades from Summit Racing™. They provide a clean, true contact surface needed for effective braking and long pad life. These stock style rotors are designed with a non-directional finish for improved braking power, high durability, excellent pedal feel, and reduction of brake noise, while their machined non-friction surface ensures optimum balance and fitment. If you want predictable braking, install Summit Racing™ brake rotors—available for fitment on a variety of makes and models.
( 23 )
$54.99
—
$64.99
Summit Racing™ Direct-Fit Restoration Seat Foam
Old seat foam over time can deteriorate, losing its shape and support. Summit Racing™ direct-fit restoration seat foam is designed to replace the worn-out foam in your OEM seats, providing you with comfortable support and the right contours to fill out your expensive seat cover(s) to their original shape. Recapture the "factory-fresh" look and feel of your ride; start your upholstery restoration with Summit Racing™ direct-fit restoration seat foam.
( 186 )
$74.99
—
$94.99
Summit Racing™ OE-Style Harmonic Dampers
Summit Racing™ OE-style harmonic dampers are ideal for those mild street rebuilds that don't require the expense of a high-buck race damper. They feature durable nodular construction with bonded elastomer between the inner and outer rings. The balancers also have engraved timing marks, which means no timing tape! Summit dampers are available in a variety of sizes for many engine balance applications. Models are available for hundreds of vehicles; order the OE replacement recommended for your ride.
( 671 )
$71.99
—
$137.99
On Sale
Summit Racing™ Vortec Cast Iron Cylinder Heads
Deliver power-building airflow to your engine with Summit Racing™ Vortec cast iron cylinder heads. These heads outflow the early model small Chevy heads with wide-open intake runners, efficient combustion chambers, and a high-performance valve job. They are made from a strong cast iron alloy that makes them less brittle than comparable Vortec heads on the market. For performance and great value, select the Summit Racing™ Vortec cast iron cylinder heads preferred for your build.
( 76 )
$649.99
$499.99
Summit Racing™ 64cc Aluminum Cylinder Heads for Small Chevy
Don't sacrifice quality for a low price--get both with our Summit Racing™ 64cc aluminum cylinder heads for small Chevy. The lightweight heads are cast from A-356 aluminum alloy and have 200cc intake ports, 64cc combustion chambers, phosphorous bronze valve guides, and ductile iron valve seats for use with unleaded gas. They're also end-milled and drilled for accessories. The fully assembled heads have 2.02 in. intake and 1.60 in. stainless steel exhaust valves, valve springs, 7 degree valve locks, 3/8 in. rocker arm studs, and 5/16 in. guideplates.
( 30 )
$1,329.99
Summit Racing™ Street / Strip Series 8mm 300 Ohm Ignition Wires
With Summit Racing™ branded, all-100 percent silicone 8mm constructed wire, a 300 ohm per foot wire-wound EMI suppression core, high-heat silicone boots, and stainless steel and brass terminals, you get all the high-end features a wire set can offer, without breaking the bank! - Dual silicone high tear-resistant jacketing with fiberglass matting gives you the highest heat protection and superior terminal pull-off values in the business - Our 300 ohm per foot wire-wound magnetic suppression core maximizes the voltage output of your ignition system, while maintaining high EMI resistance values - Stainless steel terminals with posi-lock hardened clips and brass terminals are used for superior connection and consistent voltage delivery - Ultra-high heat silicone spark plug boots provide superior radiant heat protection - High dielectric strength properties virtually eliminate voltage leakage and blow through Installing our Summit Racing™ high-end 8mm sets will give you the confidence, reliability, and performance you expect from Summit Racing™ products.
( 1030 )
$36.99
—
$82.99
Summit Racing™ Valve Spring and Retainer Kits
Installing a new camshaft is a sure way to improve horsepower—just remember that the rest of the valvetrain must be upgraded for proper operation. These Summit Racing™ valve spring and retainer kits include everything you need to keep your engine running in top shape after a cam swap. Each set features high-quality valve springs, steel retainers and locks, and Viton® seals. They're available in multiple size options.
( 77 )
$104.99
—
$126.99
Summit Racing™ Stainless Steel Fuel and Brake Hard Lines
Summit Racing™ stainless steel multipurpose hard lines are ideal for plumbing your brake or fuel systems. These Marine-grade, 316L Polished stainless lines feature a standard 0.028 in. wall thickness for strength while remining workable and are soft-annealed for easier flaring, cutting and bending compared to other stainless steel lines. Molybdenum is also added for ultimate corrosion resistance. These lines meet SAE J1677 and ASTM A249 specifications. They're rated for a minimum burst pressure of 5,945 psi (and higher depending on line OD) and have been pressure tested and checked for safety. Order the tubing diameter needed for your applications. NOTE: Stainless steel is more difficult to bend and flare, compared to typical steel line. We recommend that a professional-grade flaring tool be used with these lines. Stainless steel can also be difficult to seal when replacing an existing brake or fuel line. The previously installed line can create a wear pattern on the flare seat which will not allow the new stainless steel flare to seal properly. When replacing an existing line we recommend a thorough inspection of the existing brake fitting, fuel fitting, junction block, wheel cylinder, brake caliper, etc. It's possible that the existing component may need to be replaced for a proper seal.
( 12 )
$45.99
—
$58.99
Summit Racing™ OE Replacement Flywheels
Summit Racing™ OE replacement flywheels offer a great fit and an economical price. They are manufactured from ductile iron and offer original fit and function. Replace your old flywheels with Summit Racing™ OE parts.
( 74 )
$96.99
—
$194.99
Summit Racing™ Direct-Fit Dash Pads
Summit 1981-87 dash pads are made to OEM specifications, they are made with foam-backed vinyl, like the originals with a protective UV coating to help prevent ultraviolet damage. Designed from GM Blueprints and materials, to fit and look like the originals. Each dash pad features steel reinforced inserts and uses all factory mounting locations and hardware. No modifications are needed for installation in your truck. Select the color to match or complement your interior. These are considered Best Quality parts.
( 8 )
$76.99
—
$593.99
Summit Racing™ LT1 Optispark Distributors
Replace your stock LT1 Optispark distributor with our all-new Summit Racing™ LT1 Optispark I or II distributors. These distributors feature an aluminum housing with heavy-duty oilite bushings, and a glass-reinforced cap with high dielectric strength and aluminum terminals.
( 126 )
$240.99
—
$261.99
Summit Racing™ Cylinder Head Bolt Kits
Summit Racing™ offers cylinder head bolt kits that will keep consistent clamping force on your heads and not your wallet! Our kits contain strong, high-quality steel bolts with either a black oxide or zinc plated finish for added durability. Some kits also include washers. Stay on budget--let Summit Racing™ help complete your cylinder head installation with our selection of cylinder head bolt kits.
( 85 )
$44.99
—
$53.99
On Sale
Summit Racing™ Direct-Fit Restoration Exterior Trim Molding
Summit Racing™ Direct-Fit Restoration exterior trim moldings highlight the body of your vehicle, providing a finished look you can be proud of. Made with quality materials and finishes, our trim pieces are available to restore the decorative and protective pieces found along the edges of the doors and windows, as well as on the body panels of cars and trucks. Complete your classic's aesthetics with the Summit Racing™ Direct-Fit Restoration exterior trim moldings reproduced for your vehicle.
( 6 )
$261.99
$44.99
—
$1,064.99
Summit Racing™ Camshafts
Here's a simple high performance solution! Our Summit Racing™ camshafts feature straight-grind, and are designed for use with hydraulic flat tappet lifters. The tight lobe separation will boost your torque, throttle response, and mid range power for exciting action at the track and on the road.
( 164 )
$179.99
—
$199.99
Summit Racing™ Connecting Rod Bearings
These Summit Racing™ connecting rod bearings are just what you need to freshen up your engine. Why? They use silicon aluminum bi-metal construction. Silicon aluminum is the choice for many of today's engine manufacturers because of its high fatigue strength and superior temperature threshold. Bearing wear is dramatically reduced and the fatigue strength is greatly improved.
( 119 )
$22.99
—
$30.99
