Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Edelbrock Marine Carburetors
Designed and calibrated from Edelbrock for use in marine applications, these Edelbrock carbs comply with U.S. Coast Guard safety standards. Cast surfaces are protected by a Chromate conversion coating which is used as a corrosion inhibitor. Other features include modified bowl venting, specially designed throttle shafts, an accelerator pump seal, a 3/8 in. inverted flare fuel inlet fitting, tube in airhorn for fuel pump vent, a 5 1/8 in. flame arrestor flange, a universal throttle lever, and revised secondaries for improved transient performance. Also included with every Edelbrock carburetor are instructions for installation, set up, and basic tuning.
( 71 )
$621.95
Edelbrock Single-Feed Fuel Line Kits
Designed to fit all Edelbrock square-bore carbs, Edelbrock single-feed fuel line kits provide a clean and custom plumbing solution for your Edelbrock carburetors. The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing. Edelbrock single feed fuel line kits are the right choice for your hot rod.
( 383 )
$38.95
—
$53.95
Edelbrock Marine-Duty Performer RPM 454 Cylinder Heads
Designed for 396-502 c.i.d. big block Chevy engines, these Edelbrock cylinder heads include heavy-duty exhaust valves that provide the added durability needed for marine applications, and have one-piece, stainless steel intake valves with hardened tips and swirl-polished heads. The high-velocity flow capabilities of Edelbrock Performer RPM cylinder heads provide increased torque across a wide rpm range that's ideal for marine use. They're cast from A356 aluminum and heat-treated to T6 specs. Their oval-port heads have 110cc chambers and their rectangular port heads have 118cc chambers. Both the oval and rectangular port heads are hard-anodized to protect the aluminum in the harsh marine environments.
( 2 )
$1,780.50
Edelbrock Heat Insulator Gaskets
Edelbrock heat insulator gaskets are designed to help prevent fuel percolation in Performer series carburetors exposed to extreme underhood temperatures. They are available in both open and ported styles, and come complete with extended-length carburetor studs.
( 233 )
$32.95
—
$43.95
Edelbrock Performer Fuel Line and Fitting Kits
Edelbrock Performer fuel line and fitting kits include the braided flex hose and pre-assembled ends to connect your fuel filter to the mechanical fuel pump—or, in racing applications, to the fuel pressure regulator. These kits are available in a variety of styles, providing leak-free installation in minutes. When plumbing a fuel system, trust the aftermarket performance expertise of Edelbrock!
( 116 )
$50.95
—
$69.95
Edelbrock Chromoly Pushrods
Edelbrock chromoly pushrods are manufactured from high-quality 4130 chromoly steel tubing that's been surface hardened for maximum durability. The rods have precision-formed swedged ends for a high-quality fit. Some pushrod sets incorporate a black oxide finish for added corrosion resistance. Order the length and diameter needed for your vehicle application.
( 39 )
$197.95
—
$288.95
Edelbrock Stainless Steel Braided Fuel Lines
Designed for use with Edelbrock's single and dual feed fuel line kits, these high-quality stainless steel braided lines make it simple to complete your installation of any Edelbrock fuel pump to fuel filter. Russell anodized aluminum fittings are included.
( 43 )
$58.95
—
$97.95
Edelbrock Carburetor Inlet Fittings
Edelbrock carburetor inlet fittings are must-have accessories when installing or tuning your Edelbrock carburetor. These fittings are manufactured from quality materials and are available in several styles to suit all of your carburetor needs.
( 98 )
$21.95
—
$23.95
Edelbrock Dual-Feed Fuel Line and Filter Kits
Designed especially for Edelbrock Thunder Series AVS carburetors, these dual-feed lines include chromed steel components and a stainless steel braided line for high-quality looks and performance. Some kits include a great looking polished or anodized filter.
( 26 )
$133.95
—
$153.95
Edelbrock Performer RPM Marine Intake Manifolds
Edelbrock Performer RPM Marine intake manifolds are designed specifically for demanding marine applications. They feature a low-rise, dual-plane design with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and feature brass lined front water crossovers and two brass flange inserts to cover the rear water openings in the cylinder heads. The brass lined crossover and inserts protect the aluminum from salt water corrosion.
( 3 )
$605.95
—
$611.95
Edelbrock Performer RPM Vortec Intake Manifolds
Edelbrock Performer RPM Vortec intake manifolds are based on their highly successful Performer family. They're designed for street rods, marine applications, and a host of engine swaps using small block Chevy V8s with 1996 and later Vortec (L31) cast iron heads or Edelbrock's E-Tec aluminum heads. They accept single square bore carbs only and have an external water bypass boss machined into the front of the water crossover for use on 1996 and later Vortec production engines. Their 1,500 rpm to 5,500 rpm power band makes them an excellent choice for a wide range of setups.
( 21 )
$617.95
Edelbrock Inline Fuel Filters
Clean fuel equals better performance and Edlbrock inline fuel filters will help. They offer a variety of filters that will keep your go-juice from being contaminated: billet aluminum high-flow filters with different levels of micron filtration, aluminum anodized filters for your nitrous set-up, and even replacement filters for your EFI fuel delivery system. Edelbrock inline fuel filters screen out the bad stuff so your engine gets the good stuff.
( 51 )
$39.95
—
$43.95
Edelbrock Sure Seat Valve Springs
Upgrading your camshaft? Get maximum performance with matching valve springs. Edelbrock's Sure Seat valve springs are made of the highest quality spring wire and are precision-wound to exact specifications. They are designed for use on OEM heads when used in conjunction with their Performer-Plus, Performer RPM, and Torker-Plus camshafts. They'll work with the stock rotators (if applicable) and fit the spring pockets perfectly.
( 42 )
$69.95
—
$208.95
Edelbrock Choke Cables
Control your manual choke with Edelbrock choke cables. They are 72 in. long and use a 3/8 in. mounting hole on the dash, and can be used on any manual choke carburetor.
( 36 )
$26.95
Edelbrock Valve Seals
Edelbrock valve seals are umbrella-shaped for dual-purpose use. Made from high-temperature Viton® material, they help to prevent oil seepage down the valve guides.
( 24 )
$39.95
Edelbrock Valve Spring Retainers
Edelbrock's valve spring retainers are made of superior-quality steel, and are machined and heat-treated for strength. They have a black oxide finish for rust and corrosion protection. And when matched with Edelbrock's valve stem lock kits and valve springs, Edelbrock valve spring retainers will give you the reliable valvetrain performance you need for your street rod, daily driver, or competition vehicle.
( 9 )
$92.95
—
$339.95
Edelbrock Dual-Quad Fuel Line Kits
Are you looking for quality fuel lines for your dual-quad setup? These dual-quad fuel line kits from Edelbrock feature two ports to supply fuel to two Edelbrock carbs when used with a dual-quad intake manifold.
( 22 )
$90.95
—
$114.95
Edelbrock Choke Cap Kits
These Edelbrock choke cap kits are designed to rebuild your electric choke cap. They include a choke cap, a gasket for the cap, three screws, and three locking tabs.
( 17 )
$46.95
Edelbrock Fuel Line Kits and Accessories
Designed to take the guesswork out of carb swaps, these fuel line and filter kits provide a quick, leak-free installation in a matter of minutes. They'll work with all Performer and some other brands of carbs and are available in different forms for a variety of applications.
( 37 )
$50.95
—
$133.95
Edelbrock Air Cleaner Spacers
Edelbrock air cleaner spacers are designed to fit between your carburetor neck flange and the air filter assembly. They come in different heights to allow for the right amount of clearance you need for your application.
( 59 )
$14.95
—
$19.95
Edelbrock Low-Profile Vacuum Fitting Reducers
Edelbrock low-profile vacuum fitting reducers facilitate the easy installation of your double pump Holley carburetor. Their low-profile design will clear your double pumper's fuel bowl when used with Edelbrock's Performer and Torker II small block Chevy intakes.
( 27 )
$24.95
Edelbrock Cylinder Head Gaskets
Edelbrock cylinder head gaskets provide the best sealing solution for your engine. Edelbrock relies on industry-leading manufacturers to ensure their head gaskets will provide optimum fit and sealing properties when used with Edelbrock cylinder heads. These replacement gaskets are machined from high-density materials to precise specs--for applications from the 1940s and up.
( 58 )
$58.95
Edelbrock Exhaust Gaskets
When installing new headers, or putting them back on after working on your vehicle, it's important to use a new set of gaskets. Edelbrock exhaust gaskets are made of EnCore HTX-900--a high-density, non-asbestos, fiber/metal core composite material consisting of two graphite coated, heat-resistant, fiber-blended sheets that are mechanically and chemically fused to an expanded steel core. The finished product provides high heat resistance, excellent load retention, and unmatched sealing performance on exhaust manifolds and headers. A 50 percent recovery rate allows for gasket expansion in the event your header loses the proper header bolt torque. Edelbrock exhaust gaskets are the perfect choice.
( 46 )
$32.95
—
$36.95
Edelbrock Intake Manifold Gaskets
Edelbrock intake manifold gaskets offer precise sealing to make more power! Properly sealing an engine is vital to making maximum horsepower, and these intake gaskets will allow for optimum flow and performance. Edelbrock synthetic fiber composite gaskets are impervious to most chemicals, and when compressed, will conform to any imperfections on the sealing surface. Produce maximum power with the maximum sealing of Edelbrock intake manifold gaskets.
( 466 )
$40.95
—
$329.95
