Availability
Showing In Stock Items. Show All 26 Items.
JOES Racing Products shock reservoir mounting kits are designed to hold canisters from 1.5 to 3 in. diameter securely in place. They're available for panel mount or in a variety of tube sizes. Keep your small fire extinguishers, shock reservoirs, and other cylindrical items safely mounted with JOES Racing Products shock reservoir mounting kits.
( 4 )
$69.95
JOES Racing Products offers a variety of components to fabricate your own A-arms, including control arm shafts, steel tubes, and adapters for use with bearing-type mounts. Use these parts to repair an existing A-arm or to build a custom model.
Not Yet Reviewed
$73.95
—
$124.95
JOES Racing Products heim joints are offered in steel and aluminum. These strong one-piece rod ends are available in several right hand and left hand thread sizes for your Junior and Micro Sprint front and rear axles.
( 2 )
$5.95
—
$13.95
JOES Racing Products tubular upper control arms feature a dual-hole 1/2 in. aluminum or steel shaft precision-machined to close tolerances, minimizing flex and binds. They are manufactured from high-quality 0.095 in. steel tubing and have a black powdercoated finish for maximum durability. All control arms are tested on JOES control arm fixtures, allowing them to produce the most rigid parts on the market.
Not Yet Reviewed
$137.95
Give your sway bar the JOES replacement sway bar swivel eyes! These assemblies unbolt so you can make quick sway bar changes, as well as keep your bar from binding. JOES Racing replacement swivel eye assemblies include a swivel eye, nuts, and shaft.
Not Yet Reviewed
$74.95
JOES Racing Products bearing-style control arms feature four sealed roller bearings that eliminate nearly all resistance, providing a rotating action that's incredibly smooth. Machined housings retain two bearings on each side, eliminating weld distortions that can create binding; and spacers hold the bearings rigidly in place, while the tight shaft tolerances eliminate unwanted suspension movements. These arms are modular and can be unbolted, so you can install them on frames that require the A-arm mount to be on the backside. JOES Racing also offers just the "tube only" sections (SLBA). Additional features include: * Arms are TIG-welded in lengths of 7 to 12 in. * Available in 1/4 in. increments * Available with straight, 10 degree, or 20 degree screw-in ball joint sleeves * Slotted aluminum or steel cross shafts * Tubular arms are steel construction with a black powdercoat
Not Yet Reviewed
$89.95
—
$199.95
Reduce flex with JOES Racing Products Micro Sprint torsion arms. They are offered in several styles for the front and rear, but all are black anodized and laser-etched to look as awesome as they perform. The rears feature a machined spud to allow your shock end to run bind-free. They are built by racers for racers. Strong-arm your racer with JOES Racing Micro Sprint torsion arms.
Not Yet Reviewed
$74.95
—
$129.95
JOES Racing Products tubular upper slotted/slugged control arms feature a dual-slotted hole aluminum or steel shaft designed to accept JOES slugs (sold separately). They are precision-machined to close tolerances to minimize flex and binds, are manufactured from high-quality 0.095 in. steel tubing, and have a black powdercoated finish for maximum durability. All control arms are tested on JOES control arm fixtures, allowing them to produce the most rigid parts on the market.
( 1 )
$149.95
JOES Racing Products control arm nut plates are designed so that you only need one wrench to change shims, slugs, or entire control arms. They keep your hands away from hot headers, speeding the time it takes to change control arms or make camber/caster adjustments. The nut plates are manufactured from durable steel and include two hex nuts for installation.
( 1 )
$38.95
JOES Racing Products Micro Sprint V2 front spindles are lighter than the originals, while keeping the same strength. These innovative spindles were designed with the racer in mind by having more axle boss and thrust bearing clearance than any other spindle on the market. All those struggles from installing your spindle onto your axle are now non-existent due to this JOES design. Version 2 (V2) will even fit old-style axle bosses without the large corner reliefs making your life easier when assembling. JOES spindles can be used on either the right or left side of your axle. Additional features and specs: * Standard 10-degree spindle * Precision CNC-machined from 7075 T-6 to ensure dimensions are held to a tight tolerance * Utilizes heavy-duty Oilite bushings for consistently smooth and maintenance-free turning * Steering arm mounting holes are 3/8 in. diameter * Steering arm holes are 2 1/8 in. center-to-center * Includes optional safety C-clip for spindle nut * Snout: 1 in. diameter/2.56 in. length * Fits 2.08 in. kingpin (axle) boss * Fits 5/8 in. diameter king pin * Steering arm/caliper mount hole dimensions are 3/8 in. diameter x 2 1/8 in. center-to-center
Not Yet Reviewed
$94.95
JOES Racing spindle nuts are available in sizes to fit Wide 5 and 5 x 5 spindles. Multiple holes in the spindle nut and a slotted retainer allow you to locate the locking tab after the hubs are torqued. Secure the spindle nut assembly at the exact torque spec you want, then set the locking tab so they cannot back-off.
Not Yet Reviewed
$28.95
JOES Racing Products Micro Sprint spindle split nuts utilize a cinch bolt system to securely lock down your hub at any torque setting. They are made from 6061-T6 aluminum with 1 in.-14 thread. Tired of using plastic nyloc nuts to hold on your Micro Sprint hubs? JOES has the solution in their spindle split nuts.
Not Yet Reviewed
$19.95
JOES Racing Products Torrington coilover thrust bearing kits are perfect for 3 in. coilover springs and JOES spring pre-loader. They allow easier adjustments and include one bearing with two washers. Tune your coilovers with JOES Torrington thrust bearing kits.
Not Yet Reviewed
$24.95
Get the most from your sway bar with JOES Racing Products sway bar adjuster assemblies. These adjusters feature a swivel eye that helps to eliminate binding under travel and load, and can be removed easily for fast sway bar changes. They help you to squeeze in setup changes with minutes to go in the last practice. JOES Racing Products sway bar adjuster assemblies are available in a choice of diameters to suit your application.
Not Yet Reviewed
$139.95
JOES Racing Products Micro Sprint adjustable chassis birdcages give your team a whole new level of options to find the perfect balance point for maximum speed—and fine-tune your adjustments to the smallest increment. These double bearing birdcages have laser-etched adjustment marks to make it easy to record your settings. They feature a championship-proven 5 1/2 in. center-to-center to deliver the forward bite you need with maximum drive off the rear tires.
Not Yet Reviewed
$169.95
There can be huge advantages to using a spring pre-loader on your race car. JOES Racing Products coilover spring pre-loaders allow you to run a soft spring but pre-load it so it has a high-static load. You'll gain the benefits of running a heavy spring to get you into and through the center of the corner, along with the benefit of a lighter spring for more traction coming off the corner. JOES spring pre-loaders feature: * Improved friction band for advanced performance * Anodized to prevent galling * Coarse threads for faster, easier adjustments * Torrington bearing included * Fits all major shock brands * Now available for 3 in. and 5 in. springs * Built in-house for improved quality control and technical support
Not Yet Reviewed
$289.95
—
$349.95
Give your sway bar JOES swivel eyes! These replacements unbolt so you can make quick sway bar changes, as well as keep your bar from binding. Add JOES Racing replacement swivel eyes for easy changes.
Not Yet Reviewed
$44.95
JOES Racing Products panhard bar mounts are available to fit different sizes of round axle tubing. They're easy to use—just loosen the bolts and slide the panhard mount, as little or as much as needed. Built to JOES high quality standards, the mounts are CNC-machined from billet aluminum and anodized to withstand the roughest racing conditions. Order the mounts needed for your application.
Not Yet Reviewed
$46.95
JOES Racing Products Micro Sprint front bushings will support your V2 spindle and reduce friction. These heavy-duty oil impregnated bronze bushings are the correct replacements for your Micro Sprint front spindle.
Not Yet Reviewed
$6.95
JOES Racing Products metric bushing bolt-in A-arms deliver quality materials and precision machine work. They feature strong steel construction with a durable black finish, steel bushings, and ball joint plates that are K5208 ball joint compatible.
Not Yet Reviewed
$149.95
JOES Racing Products sway bar mounts are the bolts used to mount your sway bar to your vehicle's chassis. The bolts are made from 7/8 in.-9 threaded stock, 10in. long with a 2 1/8 in. fixed eyelet welded on the end. They are zinc plated and include two jam nuts.
Not Yet Reviewed
$39.95
JOES Racing Products replacement sway bar adjuster brackets work great to fix wreck damage. They are anodized and etched for great looks. When you just need the brackets, only these JOES replacements are perfect.
Not Yet Reviewed
$99.95
JOES Racing Products Micro Sprint torsion stops fit the popular 7/8 in.-48 spline found on most Micro Sprints. They're crafted from aluminum, given a black finish, and tagged with the JOES logo. Hold your torsion bar in place and have a way to adjust your car's height with JOES torsion stops.
Not Yet Reviewed
$29.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
