Availability
Showing In Stock Items. Show All 22 Items.
Equip your roll cage with JR Race Car helmet bar kits. These weld-in bars are rule book requirements for the NHRA and IHRA. Added protection and safety can be accomplished with these rough cut and bent chromoly tubing kits. Race smart; use JR Race Car helmet bar kits to complete your upper roll cage.
( 3 )
$42.90
Competitive drivers make a lot of custom alterations to their vehicle. Many times it involves attaching an add-on component to the chassis. JOES Racing Products can solve routine mounting issues with their line of roll bar clamps. Constructed of 6061-T6 aluminum, these handy units allow you to weld any aluminum accessory to the clamp, then tighten it around the frame tubing with two Allen screws. A simple and secure anchor! JOES clamps are available in various diameters, as well as an extended version.
( 10 )
$23.95
—
$44.95
Now you can easily mount parts or accessories to your chassis! Simply weld or screw JOES Racing extended roll bar clamps to any aluminum device that you want to bolt to the frame. Tighten two Allen screws and the component is securely attached. JOES extended clamps are constructed of 6061-T6 aluminum and available in sizes to fit several tube diameters.
Not Yet Reviewed
$26.95
Helmets are expensive and a safety necessity. Hang yours with JR Race Car Jr. Dragster helmet hooks. These aluminum hooks keep your helmet secure when not racing and trailering. Take care of your helmet and anchor it to one of JR Race Car's helmet hooks.
Not Yet Reviewed
$25.73
Get your race car through the corner faster using JOES Racing Products slotted/slugged type control arm roll center plates. They are designed to change your race car's front roll center. The plates feature precision-machined slots that accept JOES slugs (sold separately), allowing you to easily change the roll center right at the track. They are manufactured from rigid steel and can be welded on any frame.
Not Yet Reviewed
$21.95
JOES Racing Products control arm nut plates are designed so that you only need one wrench to change shims, slugs, or entire control arms. They keep your hands away from hot headers, speeding the time it takes to change control arms or make camber/caster adjustments. The nut plates are manufactured from durable steel and include two hex nuts for installation.
( 1 )
$38.95
JOES Racing spindle nuts are available in sizes to fit Wide 5 and 5 x 5 spindles. Multiple holes in the spindle nut and a slotted retainer allow you to locate the locking tab after the hubs are torqued. Secure the spindle nut assembly at the exact torque spec you want, then set the locking tab so they cannot back-off.
Not Yet Reviewed
$28.95
JOES Racing Products offers a variety of components to fabricate your own A-arms, including control arm shafts, steel tubes, and adapters for use with bearing-type mounts. Use these parts to repair an existing A-arm or to build a custom model.
Not Yet Reviewed
$23.95
Shed some weight with JOES Racing Products Micro Sprint tubular king pin assemblies (when combined with JOES V2 spindles--sold separately). Intentionally designed to reduce weight and be easily assembled with two Allen keys, the king pins are precision machined to aircraft standards from high-strength 4340 steel and feature a replaceable cap. Lose weight, simplify assembly, and reduce maintenance with JOES Micro Sprint tubular king pin assemblies. Features: * 5/8 in. (.625) diameter * 3.800 pin length (below shoulder) * Lightweight tubular assembly * Anodized and threaded cap eliminates snap rings * Designed with two different sized Allen wrenches (3/8 and 1/4 in.), so one set of Allen keys will allow you to tighten up your king pin
Not Yet Reviewed
$29.95
JOES Racing Products Micro Sprint steering arms are made from solid 6061-T6 aluminum and given a durable black finish. They're designed to be rigid and lightweight to work with nearly all Micro Sprint spindles. Circle the track with winning confidence and JOES components.
Not Yet Reviewed
$29.95
Adjusting the bump steer in your race car sometimes requires shimming up the rack. JOES Racing Products rack and pinion spacers are designed to eliminate the need to stack up a bunch of washers. They feature one-piece billet aluminum construction that will add to the rigidity of your rack mounting, creating a solid steering feel. The spacers are anodized gray for a great look and are available in different thicknesses to get the right setup.
Not Yet Reviewed
$27.95
—
$30.95
JOES Racing Products Torrington coilover thrust bearing kits are perfect for 3 in. coilover springs and JOES spring pre-loader. They allow easier adjustments and include one bearing with two washers. Tune your coilovers with JOES Torrington thrust bearing kits.
Not Yet Reviewed
$24.95
JOES Racing Products tapered control arm spacers are designed to adjust the caster without putting your control arm in a bind. They feature a slotted, one-piece design that lets you change camber without removing the control arm bolts. The spacers are machined out of aluminum, anodized, and laser-engraved with the size listed clearly.
Not Yet Reviewed
$20.95
JOES Racing Products Jr. Sprint steering arms are made from solid 6061-T6 aluminum. They bolt directly onto the car's front spindles and work for either the left or the right spindle. Circle the track with winning confidence and JOES Jr. Sprint components.
Not Yet Reviewed
$42.95
JOES Racing Products panhard bar mounts are available to fit different sizes of round axle tubing. They're easy to use—just loosen the bolts and slide the panhard mount, as little or as much as needed. Built to JOES high quality standards, the mounts are CNC-machined from billet aluminum and anodized to withstand the roughest racing conditions. Order the mounts needed for your application.
Not Yet Reviewed
$46.95
Give your sway bar JOES swivel eyes! These replacements unbolt so you can make quick sway bar changes, as well as keep your bar from binding. Add JOES Racing replacement swivel eyes for easy changes.
Not Yet Reviewed
$44.95
JOES Racing Products sway bar mounts are the bolts used to mount your sway bar to your vehicle's chassis. The bolts are made from 7/8 in.-9 threaded stock, 10in. long with a 2 1/8 in. fixed eyelet welded on the end. They are zinc plated and include two jam nuts.
Not Yet Reviewed
$39.95
JOES Racing Products Micro Sprint torsion stops fit the popular 7/8 in.-48 spline found on most Micro Sprints. They're crafted from aluminum, given a black finish, and tagged with the JOES logo. Hold your torsion bar in place and have a way to adjust your car's height with JOES torsion stops.
Not Yet Reviewed
$29.95
JR Race Car jackshaft supports are designed to add consistency and reliability to your ETs by supporting your jackshaft. They help prevent belt whip and reduce jackshaft deflection. The supports include a bearing plate for dual-bearing setup, bearings, spacer kit, and hardware. The JR Race Car jackshaft supports are fully adjustable for any belt length and engine angle; a longer jackshaft may be required in some engine situations.
Not Yet Reviewed
$49.57
JOES Racing Products torsion bar bushings will keep your torsion bars running free! Made from durable, lightweight bearing-quality plastic, they offer the benefit of increased wear resistance for longer bushing life, as well as less mating component wear. JOES bushings are available in common wall thickness and are sold in sets of four.
Not Yet Reviewed
$39.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
