Availability
Showing In Stock Items. Show All 9 Items.
On Sale
Holley Sniper 2 EFI Power Distribution Modules (PDM) are cost-effective and optional accessories that isolate the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. The PDM also distributes power to your EFI fuel pump and a single fan (second fan can be ground triggered through the included input/output harness). Two additional 2-amp circuits can power low-current accessories like gauges or to trigger relays. Battery and a switched 12 V source are all that's required from your vehicle to power the PDM. Product details: * Provides conditioned Power, Ground and Switched connections for ALL components within a Sniper 2 EFI install. (Throttle Body, Fuel Pump, HyperSpark Ignition System, and Optional Fan) * 3 relay channels – 15 amp Powertrain (Sniper throttle body and ignition system) 25 amp - Fuel pump output – 25 amp fan output * LED status indicators, show you which channel is triggered at a glance * Removable cover for easy accessibility, with wiring diagram built into the lid, like a fuel panel
( 7 )
$189.95
$170.95
On Sale
Holley Sniper 2 EFI 3.5 in. LCD touch screen controllers give you access to a wide range of tuning options. These hand-held controls can be used as a fully customizable data monitor—and with the unit's 3 1/2 in. display, your Sniper EFI system vitals can be viewed at a quick glance! Monitor a vast number of parameters in pre-configured, multi-gauge, and monitor screens—or customize your own with Holley Sniper 2 EFI 3.5 in. LCD touch screen controllers. Features and benefits include: * Full-color, backlit 3 1/2 in. touch-screen LCD * Laptop-free tuning changes to help optimize mileage, drivability, and performance * Basic tuning options allow simple adjustments of basic fuel, fuel learn, basic idle, spark, and more * System tuning options allow modifications to outputs, engine setup, and ignition setup * Advanced tuning options allow fine-tuning of fuel, closed loop, learn, and idle—including IAC parameters and idle spark * Set up ECU data-logging, download data-logs, or upload and download global folders with the SD card, update ECU firmware, and adjust rev limiters 1 and 2 * Includes the touch screen controller, mounting sleeve, power and extension harness, and SD card * Screen dimensions – 3.350 in. wide x 2.850 in. tall x 0.700 in. thick * Sleeve dimensions – 3.625 in. wide x 2.925 in. tall x 1.000 in. thick
( 1 )
$279.95
$251.95
On Sale
These Holley Sniper 2 EFI PDM main harnesses includes the switched 12V power wire, main battery power and ground, coil input wire, and HyperSpark distributor connector. They feature a braided split wire loom to keep the wires protected and your engine bay clean! They are intended to be used on applications with a PDM, and do not include a fuel pump relay. Holley Sniper 2 EFI PDM main harnesses include: * One 5 ft. 12 gauge main battery power wire * One 5 ft. 12 gauge main battery ground wire * One 30 amp fuse * One 20 ft. 20 gauge fuel pump trigger wire * One 3 ft. 20 gauge coil input wire * One 5 ft. 20 gauge switch 12V ignition wire
( 4 )
$145.95
$131.35
On Sale
Holley Sniper 2 EFI main wiring harnesses include the switched 12 V power wire, main battery power and ground, fuel pump relay, coil - input wire, and HyperSpark distributor connector. This harness is braided split-wire loom to keep the wires protected and your engine bay clean! Holley Sniper 2 EFI main wiring harnesses feature: * One 5 ft. 12 gauge main battery power wire * One 5 ft. 12 gauge main battery ground wire * One 30 amp fuse with cover with mounting tab for a secure installation * One 40 amp 5-pole relay with mounting tab for a secure installation * One 20 ft. 12 gauge fuel pump 12 V power wire * One 3 ft. 20 gauge coil input wire * One 5 ft. 20 gauge switch 12 V ignition wire
( 1 )
$212.95
$191.65
On Sale
Holley Sniper 2 EFI input/output wiring harnesses give you access to two ground trigger inputs, two ground trigger outputs, the points output, tachometer output, and digital gauge output wires. The input grounds can be used for things such as AC Kick and nitrous stage activation. The output grounds can be used for electronic fan control, or A/C shutdown at WOT. This harness includes an additional 0-5 V TPS output commonly used for transmission control units, and a tach output wire to drive most common aftermarket tachometers. Additional details: * Wires come individually labeled for easy identification * 4 x 5 ft. long output wires * 2 x 5 ft. long input wires
( 5 )
$44.85
$40.37
On Sale
These K&N powersports performance air filters are ideal for extended use in dirty and dusty off-road riding and provide clean carburetion, even at high altitudes. As a rule, no jet changes are required with just a K&N filter element. K&N powersports performance air filters are washable and reusable and provide for high airflow with excellent filtration.
( 86 )
$83.99
$67.19
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
