Selected Filters


Loading...

Availability


Electrical Wiring

Part Groups

Results 1 - 24 of 31

JOES Racing Products 2-Terminal Battery Disconnect Switches

JOES Racing Products 2-terminal battery disconnect switches are for use in emergency situations to close off the current flowing from your battery with just a simple twist of the dial. These disconnect switches also can be used to help prevent battery drain--and are available either with or without the panel.

4.96 out of 5 stars ( 28 )

$37.99

—

$41.36

On Sale

Haltech Elite 4-Port CAN Hubs

Haltech Elite 4-port CAN hubs instantly integrate into your Haltech system. These plug-and-play units allow you to expand the functionality of your ECU by permitting the connection of multiple CAN-based expansion devices. Each CAN hub includes a 300mm direct connection cable to link the CAN hub to an Elite Series ECU, and two or more hubs can be connected together.

Not Yet Reviewed

$135.99


$130.00

On Sale

Haltech Solid State Relays

Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These 100 amp solid-state electrical relays are useful for high-frequency PWM control of auxiliary injectors, variable-speed fans, or pump control, etc. * Includes: 1K Pull up resistor. Note: Inductive loads must have diode suppression.

4.8 out of 5 stars ( 5 )

$62.99


$59.00

On Sale

Holley EFI Tach Input Ignition Adapters

Holley EFI tachometer input ignition adapters are for applications using a CD Box, such as an MSD 6AL, while not using timing control. They're designed for use with Sniper 2 EFI systems and external ignition control boxes with tachometer signal output. Not for direct connection to coil.

Not Yet Reviewed

$29.99


$26.87

JOES Racing Products 4-Terminal Battery Disconnect Switches

Whether you have an emergency situation that requires an immediate shutdown, or you just want to prevent various accessories from draining the power source (your battery) when your vehicle is not use, JOES Racing Products 4-terminal battery disconnect switches can come to your rescue. The back of these units are treated with rubber sealant to keep out dirt and moisture to offer long service. They're designed for vehicles equipped with an alternator, and are engineered to close off the electrical current flowing from your battery in an instant with just a twist of the dial. You won't realize how valuable these 4-terminal battery disconnect switches actually are ... until you need to use them!

5.0 out of 5 stars ( 4 )

$54.99

On Sale

Haltech 6 Circuit Fuse Boxes

Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. This replacement 6-circuit fuse box with lid is built to fit and function just like the original. A matching pin set is included. (Relays and fuses available separately.)

5.0 out of 5 stars ( 2 )

$78.99


$74.00

JOES Racing Products Switch Panels

JOES Racing Products offers a variety of high-quality switch panels from ignition to start to accessory panels. JOES Racing has numerous panel combinations to meet your needs. The ignition switches feature an aircraft-style flip cover, while start and accessory switches have waterproof boots to seal out moisture and dirt.

4.89 out of 5 stars ( 28 )

$56.99

—

$117.99

Mac's Fleece Sleeve Protectors

Mac's fleece sleeve protectors feature an integral piece of foam padding for attachment to any 2 in. strap. They'll protect the finish of your towing attachment point from abrasion during transport.

4.89 out of 5 stars ( 9 )

$15.99

JOES Racing Products Weather-Resistant Start Buttons

Whether your thing is asphalt or dirt track racing, JOES Racing Products weather-resistant start buttons come standard with weatherproof rubber boots on the front and a rubber coating on the back, sealing out moisture and dirt. They use heavy-duty contacts for a long life. With JOES Racing Products, you can start your engines and get racing!

4.0 out of 5 stars ( 4 )

$14.99

On Sale

Haltech ECU Terminals

Haltech offers a variety of wiring connectors and replacement parts for automotive performance and engine management applications, including these ECU terminals. They're available in different styles: * 8-32 Pin TYCO connector range * 26 pin, 2 row and 26/34 pin, 4 row AMP Superseal Range (E6X)

5.0 out of 5 stars ( 4 )

$17.99


$16.00

On Sale

Haltech Harness Sleeve Packs

Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These wiring sleeve packs will protect your various cables and give your harnesses a professional look. Kit includes: * Nylon sleeves: 6mm x 10m, 8mm x 5m, 14mm x 2m, 25mm x 1m * Heatshrink glue-lined sleeves: 8mm x 1.2m, 12mm x 0.6m, 19mm x 0.3m, 35mm x 0.12m * Cable ties: Small (100mm) x 20, Medium (200mm) x 10 * Fleece Tape: one roll

4.0 out of 5 stars ( 1 )

$46.99


$44.00

On Sale

Holley EFI Pro-Billet Ignition Adapters

Holley EFI Pro-Billet ignition adapters allow for plug-and-play ignition timing control when utilizing an MSD Pro-Billet distributor and Holley EFI main harness with an ignition connector. The adapters are ideal for use with Terminator X electronic fuel injection.

5.0 out of 5 stars ( 3 )

$40.22


$25.95

JOES Racing Products Switch Panel Brackets

JOES Racing Products switch panel brackets are designed to easily mount a JOES switch panel or any other panel. They can be used to mount your panel above or below your chassis tubing. The brackets are made from high-quality steel and feature pre-tapped holes, which allow for easy mounting of your switch panel--as well as other accessory items.

4.67 out of 5 stars ( 3 )

$52.95

—

$52.99

On Sale

Haltech TYCO Plug and Pin Connector Sets

For your Haltech ECU there are several wiring and connectivity accessory choices. Their TYCO plug and pin connector sets are available with different plug arrangements along with the quantity of pins needed. Choose the plug and pin kits needed for your ECU connections.

Not Yet Reviewed

$39.99


$37.00

On Sale

Haltech Elite CAN Adapter Harnesses

Haltech offers a wide range of wiring components for automotive performance applications, including this Elite CAN adapter harness. Haltech Elite CAN cables are available in many lengths to connect DTM-4 to DTM-4, 8-pin Tyco, or OBDII, or a DTM4 receptacle to 16-pin Tyco. Choose the proper connectors and length needed.

Not Yet Reviewed

$51.99


$48.00

On Sale

Haltech Superseal Plug and Pin Connector Sets

For your Haltech ECU there are several wiring and connectivity accessory choices. Their Superseal plug and pin connector sets provide weather-resistant connections, and are available with different plug arrangements along with the quantity of pins needed. Choose the plug and pin kit needed for your ECU.

Not Yet Reviewed

$92.99


$87.00

BikeMaster 12-Volt Power Adapters with Mounts

When you need a power adapter on a ride where no wired power source currently exists, these BikeMaster 12-volt power adapters with mounts come with plenty of cable and fitted ring connectors. They're fused to protect the rest of your machine's wiring and have a waterproof adapter for accessories. These power adapters are perfect for wiring custom applications on your ride and come with the mount you may need to secure them in place.

Not Yet Reviewed

$27.99

JOES Racing Products Weather-Resistant On-Off Switches

JOES Racing Products weather-resistant on-off switches feature backs treated with rubber sealant to keep out dirt and moisture. These 40 amp high-capacity ignition or accessory switches work for both asphalt and dirt track racing.

5.0 out of 5 stars ( 1 )

$17.99

K and S Technologies Hydraulic Brake Light Switches

Get peace of mind, knowing that your brake lights are functioning correctly, with these hydraulic brake light switches from K&S Technologies. Made of top-quality materials, they are activated by fluid pressure and come in different sizes to fit your needs.

3.0 out of 5 stars ( 4 )

$39.99

—

$45.99

DragonFire Racing Steering Wheel Accessory Plates

DragonFire Racing steering wheel accessory plates feature durable, all-steel construction with a powdercoat finish for protection. They're designed for use on 6-bolt steering wheels with fixed or quick-release hubs. The plates are available in different heights (deep or shallow) to fit a variety of steering wheels. Each kit includes two momentary switches, one red and one black. Wiring is sold separately.

Not Yet Reviewed

$25.99

—

$59.99

Clearance

Haltech Elite 2000/2500 GM Gen IV LS/LSX Non-DBW Terminated Harness

Haltech's Elite 2000/2500 GM Gen IV LS/LSX Non-DBW terminated harness is the fastest and most cost-effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires and this plug-and-play product allows you to be up and running in just a few hours. When installed in conjunction with a Haltech Elite ECU, this harness opens the door to virtually limitless performance modification and tuning of your vehicle. * Injector Connector harness options: Bosch EV1 or Bosch EV6 * Quick start guide will walk you through installation of the harness * Guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration * Programmable systems allow you to extract all the performance from your engine—by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions * Suits: Common U.S.-style Delco/Bosch GM alternator connector. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. Manual transmission only. * Includes: Engine harness with fuse block and firewall grommet * Notes: Please confirm your alternator connector (See the product quick start guide) and order an alternator adapter if required. (HT-040090 or HT-040091) LS2 Ignition coils and harnesses are NOT included.

Not Yet Reviewed

$670.00


$399.50

BikeMaster Replacement Blade Style Fuse Kits

You never know which fuse is going to go next, so having a BikeMaster replacement blade style fuse kit can be a ride-saver. The electrical fuses are conveniently packed in a carrying case, with multiple fuses at various amperages available. You simply pick out the match for the fuse you need to replace and pop the new one in. The kits are available in quantities ranging from 5 to 35 fuses.

5.0 out of 5 stars ( 2 )

$15.99

DragonFire Racing Laser-Etched Switches

DragonFire Racing laser-etched switches are universal and offer a great way to keep your UTV accessories straight. Each switch features cool pictograms that illuminate. From bunnies to zombies, and fans to lights, you can choose the designs you like best to outfit your off-road machine. The switches are available for nearly a dozen electrical functions (and in your choice of red or blue light). Features include: * Simple wiring design (3-prong) * Built-in LED illuminates the logo pattern * Fits in most OE standard panels * Standard mounting hole size: 1.43 in. x .850 in. * Rating: DC 12 V 20 amp, DC 24 V 16 amp * Certified: UL, CE, ROHS, and IP68 waterproof-approved

Not Yet Reviewed

$11.99

—

$12.99

JOES Racing Products Switch Flip Covers

JOES Racing switch flip covers are designed to verify that the safety switch is off when it is in the down position. These quality aircraft-style switch flip covers can also help to prevent a switch from being turned on accidentally during an emergency. Don't second-guess yourself, wondering if the safety switch is on—or off! Use switch flip covers from JOES Racing and be sure!

Not Yet Reviewed

$12.99