Computers, Chips & Programmers Ignitions & Electrical

HP Tuners Prolink+ Cables

Get access to even more vehicle data using HP Tuners Prolink+ cables to wire in up to two analog signals and one CAN bus signal simultaneously. Prolink+ cables are designed specifically for MPV12+ and MPV13. Specifications: * Two dedicated 0 to 5 V analog inputs * One CAN bus input--500kbps * 100Hz sampling rate * M8 connector to 5 wire harness * For MPVI2+ and MPVI3 interfaces Note: MPVI2+ interfaces must purchase Pro Feature Set to be able to use the PROLINK+ cable.

5.0 out of 5 stars ( 9 )

$79.99

Haltech Elite 1500 ECU

Haltech's Elite 1500 is a 2-connector, standalone ECU ideal for popular late model performance and racing applications. Recommended for 4-cylinder, drive-by-wire (DBW) or 2-rotor engines, EFI conversions, and engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 1500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 1500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Additional product details: * Supports 1 to 12 cylinder engines * 2 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range, or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * 4 x fuel injection outputs * 4 x ignition outputs * 12 x digital outputs * 10 x analog voltage inputs * 4 x synchronized pulsed inputs * 3 x dedicated inputs (knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position inputs with extensive trigger-type support * Up to 45 channels of Input & Output (I/O) expansion (via CAN) * USB laptop communication (Windows) * NSP Calibration Software, intuitive and easy to use * Outputs: Up to 4 injector and 4 ignition * Suits: Popular late-model performance and racing applications. Recommended for 4-cylinder, DBW or 2-rotor engines, EFI conversions, and engines with multiple variable camshafts. * Includes: Elite 1500 ECU with DBW and Race Functions, USB programming cable and software on a USB drive * Notes: Available with universal wiring, terminated engine harnesses, or model-specific plug-n-play adapter kits

Not Yet Reviewed

$1,625.00

On Sale

Haltech Idle Air Control Kits

Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These replacement idle air control kits include a billet 2-port housing with 2-screw style motor. They're built to fit and function like the originals. Matching plugs and pins are included.

Not Yet Reviewed

$199.00

$190.00

HP Tuners Computer Programmer Accessories

Want to maximize the performance of your current HP Tuners setup? HP Tuners offer computer programmer accessories, from USB cables to OBD-2 cables, EIO plugs, and more. These quality hardware components can be used as replacements for worn or misplaced originals, or to upgrade your existing setup.

4.64 out of 5 stars ( 22 )

$49.99

HP Tuners OBD II Adapter Cables

Take advantage of your BRP vehicle's full potential with an HP Tuners OBDII adapter cable. Plug the gray insert directly into your BRP's diagnostic port and the black OBDII-end into your MPVI2, MPVI2+, or MPVI3 interface for full functionality. This OBDII adapter cable is required for tuning any supported BRP vehicles, including Can-Am and Sea-Doo.

Not Yet Reviewed

$49.99

Rick's Motorsport Hot Shot CDI Ignition Boxes

Rick's Motorsport Hot Shot CDI ignition boxes are available for a variety of powersports applications. These Hot Shot series boxes offer an assortment of performance upgrades. Hot Shot CDI ignition boxes provide hotter spark and advanced power curves, allowing your machine to rev up to an additional 1,000 rpm over redline. They may also be used to replace defective CDI boxes on stock machines.

3.0 out of 5 stars ( 6 )

$59.95

—

$244.95

HP Tuners OBDII Adapter Cables

HP Tuners OBDII adapter cables are engineered to expand vehicle connectivity and streamline the tuning, scanning, and diagnostic process for enthusiasts and professional calibrators alike. Designed for integration with compatible HP Tuners hardware and software, these high-quality adapter cables provide reliable communication between supported vehicles and tuning interfaces, enabling accurate data transfer, enhanced compatibility, and dependable performance in demanding shop or garage environments. Whether you're accessing vehicle data, flashing calibrations, or connecting to specialized applications, HP Tuners OBDII adapter cables deliver the durability, precision, and plug-and-play convenience needed to keep your tuning workflow efficient and effective. Core features and benefits: * Application-specific connectivity—designed to connect compatible vehicles and equipment to supported HP Tuners interfaces for diagnostic, data-logging, and calibration functions * Available for select Honda® Powersports, BRP, Polaris, Indian Motorcycle, Yamaha, and other supported applications, depending on cable configuration * Helps ensure stable communication between the vehicle's factory diagnostic connector and compatible HP Tuners hardware * Plug-and-Play installation—purpose-built connectors simplify setup and eliminate the need for custom wiring in supported applications * Compatible with HP Tuners Hardware—designed for use with supported MPVI2, MPVI2+, MPVI3, and MPVI4 interfaces, depending on application requirements * Durable construction—built to withstand repeated use in professional tuning shops, service environments, and enthusiast garages * Supports Tuning and Diagnostics Workflows—enables access to supported vehicle systems for scanning, data acquisition, diagnostics, and calibration activities where available * Multiple adapter styles are offered to support different connector types, model years, controllers, and vehicle platforms (compatibility should always be verified before purchase)

Not Yet Reviewed

$49.99

Rick's Motorsport CDI Ignition Boxes

Rick's Motorsport CDI ignition boxes are designed as OEM replacement ignition boxes for an array of powersports applications. These CDI ignition boxes mount in the majority of stock locations. Rick's Motorsport ignition boxes are sold complete, including all wiring to establish all necessary connections. Rick's Motorsport CDI ignition boxes are very dependable and are used by many powersports enthusiasts.

Not Yet Reviewed

$89.95

—

$219.95