Wilwood Disc Brakes: Calipers, Brake Pads, Rotors, & more

Wilwood Bearing Cups

Wilwood bearing cups are manufactured for your drag hubs. These bearing races meet the highest specifications and strictest tolerances to ensure the highest performance and long life. Replace your outer bearing races with Wilwood bearing cups.

4.0 out of 5 stars ( 1 )

$4.86

—

$6.69

Wilwood EXP 600 Plus Super High-Temp Racing Brake Fluid

Wilwood EXP 600 Plus Super High-Temp racing brake fluid is a highly refined blend developed for extreme performance under the high heat and extreme pressure of professional motorsports. EXP 600 Plus has tested to 626 degrees F with a wet boiling point of 417 degrees F. These numbers far exceed any DOT or SAE specifications. EXP 600 Plus brake fluid has been proven to maintain a firm pedal feel and quick response and it has low-moisture affinities to slow the natural absorption rate of water vapor. For optimum performance, EXP 600 Plus should not be diluted with any other brake fluids; add new fluid to a clean system.

4.93 out of 5 stars ( 55 )

$26.53

—

$518.02

Wilwood Hi-Temp 570 Degree Racing Brake Fluid

Wilwood HI-TEMP 570 Racing brake fluid has a dry boiling point of 570 degrees F to meet racers' demands lap after lap. The lower viscosity of the DOT 3 rated formula allows ABS systems to react faster and makes bleeding brakes easier. Increased resistance to aeration and foaming improve pedal feel and consistency in severe use.

4.83 out of 5 stars ( 47 )

$15.71

—

$83.47

Summit Racing™ Master Cylinder and Pedal Pro Packs

These Summit Racing™ master cylinder and pedal Pro Packs make adding a clutch or brake pedal a simple installation. They include a Wilwood aluminum master cylinder in your choice of cylinder bore diameters and either a floor mount or firewall mount aluminum pedal with a built-in, anti-slip pedal pad. Whether you want to install a clutch or brake pedal, we'll have you covered with one of these Summit Racing™ master cylinder and pedal Pro Packs.

4.18 out of 5 stars ( 11 )

$169.02

—

$189.65

Wilwood Forged Dynalite Front Drag Race Disc Brake Kits

Wilwood's Forged Dynalite Front Drag Race disc brake kits are designed for all cars weighing less than 2,800 lbs. and those with rear drum brakes weighing less than 2,400 lbs. They feature billet 4-piston calipers, forged billet hubs, lightweight alloy-steel rotors, and PolyMatrix pads. The resulting packages produce great braking performance and also chop a whopping 50 lbs. off of your vehicle's front-end. Each kit includes CNC-machined aluminum mounting brackets and all hardware necessary for installation.

4.92 out of 5 stars ( 12 )

$857.49

—

$1,024.09

Wilwood XRD Single Caliper Dynamic Mount Drag Race Brake Kits

Making drag race vehicle builds much easier, Wilwood's XRD single caliper dynamic mount drag race brake kits package their XRD calipers and 11.25 in. super alloy scalloped and drilled rotors that are compatible with many popular drag race rear axle flange types. These kits are perfect for racing cars with wider tires that rely heavily on the rear brakes for more stopping power. These single caliper kits star Wilwood stress-flow forged aluminum XRD calipers, featuring the latest FEA (finite element analysis) computer design technology to shed weight while maintaining rigidity. Choose the configuration best suited to your vehicle's weight, power, and chassis setup. Kit features: * XRD calipers -- Forged aluminum, 4-piston -- Type III hard anodized inside and out, including piston chambers -- High temperature seals * SA scalloped rotors -- Lightweight 11.25 in. rotors -- Allow more clearance for use on typical 15 in. rear beadlock wheels -- High resistance to thermal distortion * Lug-drive dynamic rotor mounting system uses a large single internal snap-ring that retains the rotor in the hat, allowing both to heat cycle independently * BP-28 brake pads with medium to high friction that increases with rotor temperature, providing a predictable, consistent pedal feel * Rotor wear clips and premium-grade hardware

Not Yet Reviewed

$1,630.75

Wilwood Forged Superlite 6R Big Brake Front Brake Race Kits

Wilwood Forged Superlite 6R Big Brake front brake race kits are configured for unrestricted category road racing on all models of the 2000-09 Honda S2000 using 17 in. or larger diameter wheels. The 6-piston FSL6R/ST calipers used in these Big Brake kits feature a forged aluminum body with a Type III mil-spec hard anodized finish. These championship-proven kits are completed with high-temperature, high-friction, endurance race compound pads selected specifically by application, and stainless steel braided flex lines. Additional features and benefits: * Hard anodizing provides superior wear resistance in the piston bores, and high resistance to abrasion and corrosion throughout * Thermlock pistons are used to reduce heat transfer from the pads to increase fade resistance, and to extend service life by decreasing temperatures in the caliper body, fluid, and seals * Internal damper springs and controlled retraction, high-temperature piston seals assure consistent pedal height from start to finish * Caliper piston volumes are matched for full compatibility with the OE power brake booster and master cylinder, and are easily configured with manual brake conversions and balance bar pedals using appropriately sized master cylinders * Spec37 alloy GT Competition Series 12.88 in. diameter directional vane rotors are dynamically mounted to the OE hubs with weight-saving forged aluminum hats * Unsprung and rotating weight are minimized while providing high cooling efficiency and rugged durability with thermal stability in sustained high-heat competition * Mounting brackets, including all premium grade fasteners, secure the calipers to the spindles in the stock location, without the need for modifications

Not Yet Reviewed

$2,477.60

Wilwood GP320 Sprint Race Car Disc Brake Kits

These Wilwood GP320 Sprint race car disc brake kits offer increased braking torque and thermal performance. They have a definitive increase in braking and durability over traditional aluminum or steel rotor systems. These Wilwood GP320 Sprint race car disc brake kits also include composition metallic brake pads and a lightweight aluminum, dynamic mount, 3-pin rotor adapter. If you're trying to put together a performance brake system, Wilwood can help you blow away the competition.

Not Yet Reviewed

$600.60

Wilwood Starlite 55 Wide 5 Racing Hubs

Pare down the weight and keep the strength with Wilwood Starlite 55 Wide 5 racing hubs. Starlite 55 hubs have been reconfigured to eliminate unnecessary weight and components to meet or beat 8-bolt magnesium assemblies. With less weight, Wilwood Wide 5 racing hubs' high-density aircraft aluminum construction provides superior strength. Front hubs further reduce weight by eliminating bolt bosses and using a fiber-reinforced composite snap-cap dust cover. Optional drilled studs lighten your weight even more. Several options are offered to fit your application: bare or black E-coat finishes; coarse or coarse drilled studs; and standard, GM, and dynamic mount offsets. In racing, you need the beef, but not the weight. Wilwood Starlite 55 Wide 5 racing hubs offer muscle without the mass.

Not Yet Reviewed

$185.20

—

$229.32

Wilwood XRD Dual Caliper Dynamic Mount Drag Race Brake Kits

Making drag race vehicle builds much easier, Wilwood's XRD dual caliper dynamic mount drag race brake kits package their XRD calipers and 11.25 in. super alloy scalloped and drilled rotors that are compatible with many popular drag race rear axle flange types. These kits are perfect for racing cars with wider tires that rely heavily on the rear brakes for more stopping power. These dual caliper kits star Wilwood stress-flow forged aluminum XRD calipers, featuring the latest FEA (finite element analysis) computer design technology to shed weight while maintaining rigidity. Choose the configuration best suited to your vehicle's weight, power, and chassis setup. Kit features: * XRD calipers -- Forged aluminum, 4-piston -- Type III hard anodized inside and out, including piston chambers -- High temperature seals * SA scalloped rotors -- Lightweight 11.25 in. rotors -- Allow more clearance for use on typical 15 in. rear beadlock wheels -- High resistance to thermal distortion * Lug-drive dynamic rotor mounting system uses a large single internal snap-ring that retains the rotor in the hat, allowing both to heat cycle independently * BP-28 brake pads with medium to high friction that increases with rotor temperature, providing a predictable, consistent pedal feel * Rotor wear clips and premium-grade hardware

Not Yet Reviewed

$2,547.55

Wilwood AERO6 Racing Big Brake Front Brake Kits

Wilwood AERO6 Racing Big Brake front brake kits enhance the performance of your OE production based road racing vehicle. These kits feature AERO6 forged aluminum and fixed mount ST Series calipers with Thermlock pistons that deliver heavy-duty stopping power in a tough hard anodized finish. Premium-grade GT Series Spec 37 alloy rotors, high performance pads, and precision-machined hats complete the list of these matched component kits. For a strong braking advantage over the competition, bolt on the optimum performance of a Wilwood AERO6 Racing Big Brake front brake kit.

Not Yet Reviewed

$2,446.99

Wilwood XR Race-Only Brake Fluid

Wilwood XR Race-Only brake fluid is the same extreme high-temperature fluid formula used in the most demanding race series including Formula 1, World Rally Championship, FIA World Endurance, and Moto GP. XR brake fluid is formulated to deliver the absolute best, most consistent pedal feel, start to finish, even in the most adverse racing conditions. Laboratory testing indicates XR Race-Only brake fluid has a dry boiling point of 645 degrees F/340 degrees C thanks to a proprietary blend of high-performance polymer electrolytes and borate esters. This polyglycol-ether-based non-DOT4 fluid combines the lowest compressibility, lowest moisture affinity, and highest resistance to aeration of any brake fluid available. Each premium metal can with airtight safety seal ensures fresh, clean fluid upon opening.

Not Yet Reviewed

$57.12

—

$644.30

Wilwood Forged Narrow Superlite 4R Big Brake Rear Race Kits

Wilwood Forged Narrow Superlite 4R Big Brake Rear Race Kits are configured for dedicated road racing on all 2001-2006 BMW E46 M3 models. They are the engineered match for the AERO6R/ST front race kits. All emphasis is on improved front to rear balance, high durability, and high efficiency heat management, without adding unnecessary rotating or unsprung weight to the driveline and rear suspension. The FNSL4R/ST calipers used in these kits feature a forged aluminum body with a Type III Mil-Spec, medium gray color, hard anodized finish. Hard anodizing provides superior wear resistance in the piston bores, and high resistance to abrasion and corrosion throughout. Thermlock pistons are used to reduce heat transfer from the pads to increase fade resistance, and extend service life by decreasing temperatures in the caliper body, fluid, and seals. Internal damper springs and controlled retraction, high-temperature piston seals assure consistent pedal height from start to finish. Caliper piston volumes are matched for full compatibility with the OE master cylinder output and ABS controls. The calipers are also fully compatible with manual brake conversions to balance bar pedals using appropriately sized master cylinders. Spec37 alloy GT competition series 12.88 in. diameter directional vane rotors are dynamically mounted to the OE hubs with weight-saving forged aluminum hats. As is with the calipers, the hats are hard anodized for superior wear resistance and extended service life at the load bearing surfaces. Further weight reduction is achieved by accommodating the elimination of the parking brake hardware. Mounting brackets, including all premium-grade fasteners, secure the calipers to the uprights in the stock location—with minor modifications to the dust shield, as illustrated in the photos on page 4 of the assembly instructions. These championship-proven systems are completed with high temperature, high friction, endurance compound race pads selected specifically by application. Stainless steel braided flexlines are included in the kit to complete the installation.

Not Yet Reviewed

$2,162.70

—

$2,213.46

Wilwood UTV4 Race Brake Kits

Wilwood's UTV4 Race brake kits feature dynamically mounted rotors and upgraded calipers for popular side-by-side machines. Kits combine fixed mount multi-piston calipers with greater clamping force, BP-20 (high-friction) brake pads, and larger diameter floating rotors for more brake torque—improving braking on higher-powered UTVs. Forged aluminum differential-bore 4- and 6-piston calipers reduce deflection and provide more uniform engagement to increase braking force and improve feel. High-friction steel rotors are up to 20 percent greater in diameter and thicker for less distortion. Dynamically mounted rotors reduce thermal stress and prevent piston knockback from rough terrain. Order the kit designed to fit your UTV.

Not Yet Reviewed

$1,429.94

Wilwood Forged Dynalite Big Brake Front Brake Kits

With Wilwood Forged Dynalite Big Brake front brake kits, you'll be ready for show, street, or strip! Track-ready performance and high-tech style come with oversized rotors, forged billet Dynalite calipers, and high performance Wilwood SmartPads. These front brake kits are fully compatible with OE master cylinder output. Options for the caliper finish and rotor design make it simple to match the brake response and style preferences on all types of daily drivers, race vehicles, and ultra-styled show machines! The choice is yours for big stopping power--choose Wilwood Forged Dynalite Big Brake front brake kits.

4.62 out of 5 stars ( 134 )

$905.70

—

$1,461.89

Wilwood Forged Dynalite Rear Drag Brake Kits

Having disc brakes up front is a great idea and Wilwood Dynalite rear drag kits make it possible to have them in the rear, too. They're built around Wilwood's forged billet 4-piston calipers, lightweight alloy-steel rotors with machined aluminum mounting hats, and Smart Pad brake pads. This combination produces great stopping power and simultaneously reduces both rotating mass and overall vehicle weight. That lighter overall weight, in turn, can translate into lower ETs. The kits come complete with Grade 8 and aircraft-quality mounting hardware.

4.82 out of 5 stars ( 39 )

$677.41

—

$745.15

Wilwood Purple Compound Brake Pads

All drivers rely heavily on their brake pads to deliver optimum performance for safety and stopping ability, and with Wildwood Purple Compound brake pads you get just that! Wilwood Purple Compound brake pads offer long wear rates and high fade resistance for special applications where intermittent high-temp spikes occur. They provide the most aggressive friction with aluminum rotors on sprint cars, but are also compatible with steel rotors or iron rotors. So, for reliable braking power, use Wilwood Purple Compound brake pads--after all, there's a lot riding on your brakes!

5.0 out of 5 stars ( 1 )

$54.86

—

$91.84

Wilwood Composite Metallic Brake Pads

Wilwood Composite Metallic brake pads are available for use with a variety of caliper applications. Designed for auto and powersports racing use only, these high-friction pads deliver a smooth initial response. They feature fade resistance and a low wear rate during sustained high-heat braking. The pads are compatible with most rotor materials, including steel, stainless steel, iron, super alloy, and titanium. Order the set recommended for your vehicle.

Not Yet Reviewed

$67.35

—

$398.73

Wilwood Smart Pad BP-28 Brake Pads

Wilwood's BP compound SmartPad Series offers multiple friction options, allowing you to optimize brake response to track conditions and weather. Their BP-28 pads offer medium-high friction and a low-temperature response with flat torque from 100 to 1,200 degrees F. Wilwood Smart Pad BP-28 brake pads deliver a smooth predictable pedal feel, medium-low pad wear, and high performance as a street/track and race pad. They are fully compatible with steel, stainless steel, and titanium rotors.

5.0 out of 5 stars ( 4 )

$108.40

—

$292.35

Wilwood Smart Pad BP-Q Brake Pads

Wilwood Smart Pad BP-Q brake pads offer characteristics ideal for steel or iron rotors, and Wilwood's Superlite line of calipers. Okay for street use, they can be used on custom show cars, street rods, muscle cars, trucks, and SUVs. Wilwood Smart Pad BP-Q brake pads have a high performance ceramic-based formula and provide medium friction with a smooth initial response, a low wear rate at low temperatures, and the lowest dust and noise.

5.0 out of 5 stars ( 2 )

$123.88

—

$186.42

Wilwood D52-R Single Piston Floater Calipers

Wilwood's D52-R single piston floater calipers feature a lightweight 4.3 lb. forged aluminum Type III hard-anodized body with a stainless steel piston. They're offered in a variety of options, including piston diameters of 2.38 or 2.75 in.; rotor widths of 0.81, 1.04, or 1.28 in.; and rotor diameters of up to 12.50 in. The caliper fluid inlet port is centered directly behind the piston, and this eliminates any interference with slide pins. These heavy-duty brake calipers feature a lower deflection rate and higher volumetric efficiency, which makes them superior to heavier cast models. They use standard D52 pads available in a range of compounds for every application. The Wilwood D-52R calipers also use the original GM stock height and offset mounting, so there's no need to make expensive modifications. This is the pinnacle design for OEM replacement racing calipers. Order the size needed for your application.

Not Yet Reviewed

$203.22

Wilwood Forged Dynalite Pro Series Rear Disc Brake Kits

Wilwood Forged Dynalite Pro Series rear brake kits provide a complete solution for popular muscle car rear axles on applications where individual wheel parking brake assemblies are not required. FDL Pro Series rear kits package Wilwood's Forged billet Dynalite 4-piston calipers, 2-piece hat and rotor assemblies, and high-friction pads for optimized and balanced braking for all types of off-road, competition, and other customized applications. The Dynalite calipers can be optioned with a full range of finishes to reflect your personalized style, and the rotor choices provide options for high-tech show winning style, or heavy weight durability and cooling capacity for high-heat competition.

4.83 out of 5 stars ( 18 )

$946.13

Wilwood XRZ4R Radial Mount Calipers

Wilwood's next generation XRZ4R radial mount calipers combine decades of race experience, computer finite element analysis (FEA), and state-of-the-art machining to produce a race caliper that is lighter and stiffer, with zero drag. The innovative complex shape of the caliper body removes unnecessary bulk, improves brake and fluid cooling, and actually decreases deflection. Four Thermlock thermal barrier pistons reduce heat transfer to the brake fluid, and the staggered bore size front calipers provide more even engagement with improved pad wear. Piston bores are hard-anodized inside and on the surface with Type III aluminum-oxide ceramic finish for durability and are equipped with single-point bleed technology and low-profile bleed screws for easy serviceability. No-bind pad retaining pins (spare included) hold your choice of multiple 0.80 in. thick Wilwood race compound brake pads for extended service life. Select the model designed to fit your application.

Not Yet Reviewed

$879.95

Wilwood DynaPro Radial Front Drag Brake Kits

Wilwood DynaPro radial front drag brake kits put the "stop" in your stopping power, and they're lighter than your stock brakes! Compact enough to fit inside 15 in. drag wheels, these narrow front drag kits feature forged billet DynaPro 4-piston radial mount calipers—with heavy-wall stainless steel pistons to resist corrosion and slow heat transfer from the pads. High performance street/strip SmartPads are shipped with the kits for added stopping power with great fade and heat resistance. Wilwood kits also include solid steel or vented iron rotors and hardware. They bolt on without spindle or steering-linkage modifications, and are fully compatible with the factory master cylinder output. Order the model designed for fitment on your vehicle—then enjoy heavyweight stopping power with lightweight Wilwood DynaPro radial front drag brake kits.

2.5 out of 5 stars ( 2 )

$1,106.59

—

$1,126.80

124 Results Found For "Racing"