Availability
UMI Performance front sway bars are designed to reduce body roll and under-steer and increase corning capabilities, resulting in a more balanced suspension. These front sway bars are more rigid than the factory originals and will bolt directly in place with no modifications. Each kit includes new Energy Suspension end links and greaseable sway bar bushings with new zinc plated clamshells. Nearly two dozen models are available for vehicles from 1963 and up; order the sway bar recommended for your application.
( 100 )
$242.99
—
$299.99
UMI Performance sway bars are designed to reduce body roll and understeer and increase cornering capabilities, resulting in a more balanced suspension. The front sway bar is more rigid than the factory model and comes complete with new polyurethane end links and greaseable sway bar bushings. The rear sway bar is supplied with new Grade 8 mounting hardware and locknuts. UMI Performance sway bars are manufactured from 4140 chromoly steel—and formed as one piece to ensure maximum strength and performance. Each rear sway bar is heat-treated and heat-formed to maintain longer memory than a cold bent bar, while the front sway bar is CNC-bent for a precise and accurate fit every time. Order the kit recommended for your vehicle.
( 72 )
$356.82
—
$370.62
Swapping an LS engine into a classic GM A-body is nothing new. UMI Performance LSX engine mounts allow the installation of an LS engine directly into your A-body. By retaining the proper angle of the engine, you keep your pinion angles/drivetrain operating smoothly. This is a good reason to get pre-engineered mounts for the swap instead of trying to make something work. These mounts place the engine in the factory location, but also give you the ability to relocate the engine rearward up to 3/4 in. or forward 1/4 in. UMI's LS engine mounts will bolt directly to your car's frame and the LS block without modifications. Their brackets have greasable polyurethane mounts to dampen vibration, but still provide a solid feel and eliminate the need for additional modification when using the LS1 oil pan. New premium mounting hardware is also included. Getting a quality set of mounts designed for your application will definitely make the swap a lot easier
( 17 )
$170.99
—
$189.81
UMI Performance Stage 2.5 handling kits bring you the best of both worlds—combining UMI's Stage 2 handling kit with four-corner Viking coilover ride height adjustability. These Stage 2.5 handling kits feature UMI's most popular combination of front and rear springs, along with all the necessary components and hardware needed to transform your GM vehicle for improved handling, ride quality, and an impressive stance. Ride height is adjustable from stock to 2 in. below stock ride height, and the Viking shocks feature 19 settings in both compression and rebound. More than a dozen kits are available, with numerous options. Select the model recommended for your vehicle. Stage 2.5 handling kits include: * Tubular lower front A-arms with polyurethane bushings * Upper front A-arms with Delrin© bushings * Viking coilover kit * Heavy-duty front sway bar with new bushings and end-links * Front upper and lower race-quality hardware kit * Solid heat-treated rear sway bar * Tubular rear lower control arms with polyurethane bushings * Tubular rear upper control arms with polyurethane bushings * Tubular frame braces with hardware * Replacement rear-end housing bushings * Rear control arm race-quality hardware kit * UMI bolt-on rear coilover kit * Thrust bearing kit (x 2) * Spanner wrench kit Note: Rear coilover kit fits GM axle housing only. Aftermarket axle housing fitment is not guaranteed.
Not Yet Reviewed
$4,649.99
UMI Performance solid rear sway bars are designed to reduce body roll and under-steer and increase corning capabilities, resulting in a more balanced suspension. UMI Performance solid rear sway bars also are excellent at keeping your vehicle level and straight during those hard launches. These sway bars are manufactured from 1 in. solid high-carbon steel that's heat-treated and formed as one piece to ensure maximum strength and performance.
( 114 )
$159.98
—
$169.97
UMI Performance adjustable upper control arms feature CNC-machined 0.250 in. mild steel, 4140 chromoly threaded tube adapters, and a high-strength, 4140 chromoly, heat-treated, 1.000 in. solid adjuster. With UMI Performance adjustable upper control arms, you can easily make pinion angle adjustments in the garage or at the track--it's as simple as loosening two nuts! Simply turn UMI's unique chromoly on-car adjuster with the control arms on the car to quickly lengthen or shorten the control arms. Pinion angle adjustments are a must when wanting to lower your track 60 ft. times, increase traction, and reduce unwanted wheel hop. Their PTFE-lined spherical rod end design allows for "bind-free" operation, making them great upgrades for both your track and autocross-driven vehicle. Additional features include: * On-car adjustability * 3/4 in. hard chrome plated PTFE/KEVLAR® self-lubricating race rod ends * Precision CNC-machined and fully welded * CNC-machined 6061 aluminum step bushings * Durable powdercoated finish
( 68 )
$224.99
UMI Performance non-adjustable lower control arms are designed to replace the factory setup. In doing so, they minimize wheel hop and improve cornering, while lowering track ETs and helping track consistency. UMI Performance non-adjustable lower control arms eliminate the flex and bushing deflection found in the factory lower control arms. Their tubular setup is built using 1.500 in. drawn-over mandrel tubing and features TIG-welded construction for the utmost in strength and durability. The rubber OEM bushings are replaced with greasable polyurethane bushings.
( 146 )
$159.99
—
$479.99
UMI Performance double adjustable lower control arms feature 100 percent TIG-welded fabrication using drawn-over mandrel tubing. UMI Performance double adjustable lower control arms also have spherical bearing rod ends, which offer "bind-free" operation by letting the suspension articulate correctly when high handling is a concern. These control arms also work great as solid bushing drag race control arms with easy, built-in adjustment. Quick and easy on-car adjustments can be made, if needed, with a simple turn of the wrench. When you are looking for maximum performance from your vehicle, you can't go wrong with this setup. Additional features include: * 1.250 in. x 0.120 in. steel or chromoly tubing * 4140 chromoly threaded tube adapters * 3/4 in. hard chrome plated, PTFE/KEVLAR® self-lubricating race rod ends * CNC-machined 6061 aluminum step bushings * On-car adjustability using right and left hand threads * Durable powdercoated finish
( 13 )
$399.99
The GM 4-link suspension has many things going for it, but modern ingenuity and materials have made for some exceptional replacement parts—such as UMI Performance Roto-Joint rear-end housing bushings. These bushings allow full articulation of GM's rear 4-link suspension when they're used in conjunction with rod ends or Roto-Joints in the other six locations. A gentle press fit is all that's needed for installation, and a spiral retaining ring keeps them in place. Pre-greased 6061 T-6 aluminum housings use Synco Super Lube to deliver smooth action for many years. Whether you use your vehicle for road racing, corner hugging, or Sunday driving, you'll feel safe in knowing your rear suspension will fully articulate with UMI Performance Roto-Joint rear-end housing bushings.
( 7 )
$158.41
UMI Performance bolt-in Viking rear coilover kits allow full ride height, spring rate, and damping adjustability. The double shear upper mount is a direct bolt-in and holds a true 2.5 in. diameter coilover spring. The FEA designed lower bracket bolts in using the standard shock mounting hole as well as an additional reinforcement hole. Drilling one 3/8 in. hole per side is required to complete installation. The coilover kits utilize Viking shocks that are 19-way adjustable in both compression and rebound to ensure the perfect setting for every application. Viking shocks are fully rebuildable. The 2.5 in. diameter coilover springs are available in 14 in. long, 110 lb. spring rate for drag use; 14 in. long, 125 lb. spring rate for street use; and 12 in. long, 150 lb. spring rate for autocross and road race applications. The coilover kits have been tested with 1.5 in. diameter UMI trailing arms, as well as UMI's 22mm sway bar and 32mm drag anti-roll bar. Fitment with other brand sway bars and larger diameter control arms is not guaranteed. Please contact UMI for additional information regarding fitment. Key features: * Brackets manufactured entirely from 3/16 in. mild steel * Laser-cut brackets for consistency and a precise fit * TIG-welded for superior strength and clean looks * Powdercoated brackets for a long lasting finish * Viking double-adjustable shocks offer 19 compression and 19 rebound adjustments * 3 spring rate options, depending upon application * Bolt-in design * No welding required * Spacers included for use with control arm relocation brackets
( 10 )
$1,069.99
—
$1,805.99
Lower your car properly with UMI Performance lowering springs. The front springs are wound from 5160 chrome silicon wire, while the rear springs are made from 9254 chrome silicon. The linear spring rates of each provide a firm but comfortable ride with exceptional handling. Suitable for Pro-Tour, Autocross, and general cruising, these lowering springs are finished with a tough black powdercoat and are available for the front, rear, or in kits with both. Order the parts designed for fitment with your vehicle's suspension. Not all springs are alike—the proof is UMI Performance lowering springs.
( 139 )
$287.99
UMI Performance suspension lowering kits are designed to give your ride a lowered stance, with improved handling and control. Packaged with shocks and/or struts and springs, UMI utilizes premium CrSi wire wound into different spring rates to fit various applications for daily driving, street cruising, carving corners, and even light racing use. You can provide your vehicle with a different attitude and performance using a UMI suspension lowering kit.
( 1 )
$665.99
UMI Performance replacement control arm bolt kits include all-new hardware for installing upper or lower rear control arms on your vehicle. UMI Performance replacement control arm bolts are Grade 8 bolts and are zinc plated.
( 101 )
$18.99
—
$31.99
UMI Performance driveshaft safety loops are NHRA-legal and will bolt-in with minimal modifications. They're a must for tracks requiring safety loops on cars running faster than 13.99 in the quarter-mile. Constructed entirely from 0.250 in. thick mild steel, the loops have CNC-machined mounting points for a superb fit, and are fully MIG-welded for outstanding strength. They are available in different styles, covering hundreds of applications from 1964 and up.
( 41 )
$79.99
UMI Performance lift bars replace your stock rear control arms, adding tremendous track gains, while not affecting ride height and keeping ride quality at its best. These lift bars are designed to work with axle torque to load the chassis of the car, forcing the rear wheels downward, while pushing the tires into the ground for harder launches and improved 60 ft. times. These bars are designed to greatly improve traction and reduce unwanted wheel hop. Constructed from boxed mild steel tubing, they feature a 0.120 in. wall and 0.188 in. thick mounting plates and are completely CNC-machined for exact tolerances and a superb fit. These lift bars feature greasable Energy Suspension bushings that reduce bushing deflection but still make these arms 100 percent streetable. Each lift bar features the correct provisions for adding a stock or aftermarket sway bar. Sway bar holes are placed in the correct pattern to maintain the sway bar level with the rear-end. All sway bar holes are reinforced with a 0.120 in. thick steel sleeve wall, TIG-welded, and then sanded into place. The rear mounting brackets feature two settings that allow the lift bar to be lowered 2 in. or 3 in., depending upon user preference and the vehicle's suspension setup. These lift bars also correct lost geometry and instant center on a lowered vehicle. Add a set of our adjustable upper control arms for maximum rear suspension setup!
( 3 )
$479.99
UMI Performance shock mounts prevent the common issue of lower rear shock mount binding. They're a bolt-in shock relocator kit that rotates each shock 90 degrees, while leaving them in the same location. The TIG-welded lower bracket holds the shock in double-shear so that it's able to pivot freely about the lower bolt. UMI Performance shock mount kits provide your vehicle with improved structural integrity and unrestricted movement. Refer to application tab for fitment.
( 3 )
$259.99
Say goodbye to leaving the line sideways with UMI's rear drag sway bars. These kits are designed to get your vehicle consistently leaving the line straight, eliminate torque steer, and drastically improve 60 ft. times. The included adjustable end links allow vehicle preload to be set for straight launches. UMI's end links feature heavy-duty chromoly rod ends, which have a hard chrome plating and a PTFE self-lubricating race. The end links attach to the drag bars using 5/8 in. Grade 8 bolts and locknuts. These heavy-duty rear drag bars attach to the axle tubes using high-strength 4140 chromoly U-bolts, 3/16 in. thick fabricated mounts, and Energy Suspension bushings. The fabricated bushing mounts feature CNC-machined teeth to prevent sliding on the axle. Unlike some competitors' designs, UMI's sway bar mounts also feature gussets welded on each end to prevent the brackets from spreading while tightening.
( 5 )
$529.99
UMI Performance lightweight, 1 in. diameter tubular rear sway bars are CNC-bent and feature a UMI tried and true CNC-machined clamping system that allows for differential housing mounting on different diameter housings. Their chassis and differential housing mounts reduce the bind normally associated with factory-style bars. They are bolt-on but may be welded for added security. Plus, the house-made hex adjuster allows for preloading of the bar when used for drag racing, so that you launch straight. Whether you're into street, auto-x, road racing, or drag racing, UMI Performance tubular rear sway bars offer the craftsmanship and performance you want for your vehicle. Features include: * Designed to clear all rear-ends--10-bolt, 12-bolt, 9 in., M9, S60, and others * Heavy-duty, race-style chromoly spherical rod ends with PTFE race * High-strength 4140 chromoly zinc plated U-bolts * CNC-machined sway bar mounts with grip teeth and reinforcement gussets * 1 in. billet steel hex adjuster for extreme strength * Premium greasable polyurethane bushings * Durable, long-lasting powdercoat
( 9 )
$519.99
UMI Corner Max front lower A-arms are designed from the ground up to be the best performing stock mount A-arm upgrade on the market. Strong yet lightweight, they feature a removable lower mounting system to permit spring or shock changes at the track without separating the ball joints. The ball joint cup is moved forward the proper amount to add up to 4 degrees caster potential—and is loaded with either high-quality Howe standard height or premium Howe +1/2 or +3/4 in. tall ball joints. The double shear coilover mount accepts race industry standard 1/2 in. rod end shocks, and comes with spacers for all popular models. Also included is a double shear sway bar mount and corresponding end link. Order the pair recommended for your vehicle. Product features: * Camber curve and roll center height are improved to yield incredible front-end grip * Coilover-only design saves weight over spring bucket versions * A-arms enhance steering feel and straight line stability * 1.500 in. DOM steel tubing construction * Includes Delrin® bushings for smooth suspension travel and decreased deflection
( 1 )
$849.99
UMI Performance coilover conversion brackets are used to provide a double shear upper attachment point for a true 2 1/2 in. racing coilover shock and spring. Most applications will use an industry standard 7 in. stroke double rod end shock and 12 in. x 2 1/2 in. diameter coilover spring. The bracket bolts to the upper A-arm mount in order to properly locate the unit for welding. Prototyping was completed using Afco Pro-Tour Elite shocks; your brand may require additional modification. Heavy fabrication is required, as the 4054 kit is intended for use on high-end, high performance Pro-Touring builds. Order the conversion brackets recommended for your vehicle.
Not Yet Reviewed
$199.99
UMI Performance body repair washers are cut to fit the factory mount for the front core support, as well as the front and rear cab mounts (common rust areas on older GM trucks). After you've removed the cab or core support, use these repair mounts as templates to lay out the areas to be cut. Then, following some cutting, welding, and grinding, your repaired mount areas will be ready for paint to help prevent future rust. Restore your GM truck frame to like-new condition with an assist from UMI Performance body repair washers.
Not Yet Reviewed
$29.99
UMI Performance control arm adjustable bushing ends are designed to replace spherical rod ends on UMI control arms for the 1964-72 GM A-Body, 1978-88 GM G-Body, and the 1982-2002 Camaro/Firebird. They will also work on many other brand control arms for the above listed vehicles that utilize a 3/4 in.-16 right-hand threaded rod end. These bushing end replacements install simply by removing the rod end and screwing in the polyurethane bushing assembly. The new bushing ends are an ideal upgrade for worn-out rod ends or rod ends making unbearable noise. Bushing holders come supplied fully assembled with Energy Suspension fluted bushings, grease fitting, new jam nut, and durable powdercoat. Bushing width is 2.400 in. with 3/4 in.-16 right-hand thread, 0.500 in. bolt hole diameter, and 1.750 in. of thread adjustment. UMI Performance bushing ends feature threads fabricated from 4140 chromoly steel, DOM tubing and TIG-welded for superior strength and thread durability. They're available in black or red.
Not Yet Reviewed
$39.99
UMI Performance coil spring spacers are designed to allow you to achieve that perfect stance or prevent tire rub. They offer an easy way to fine tune the height of your vehicle with no cutting, welding, or drilling required. UMI Performance coil spring spacers are manufactured from zinc coated steel, are available in different thicknesses, and may be safely stacked to suit your specific vehicle application.
( 1 )
$9.99
Give your classic ride a modern feel with these UMI Performance front non-adjustable upper A-arms with tall ball joints. These control arms improve your ride's suspension geometry by providing for additional caster, as well as increased negative camber throughout suspension travel. The new geometry gives your car a better steering feel and increased lateral grip throughout the turn. Each control arm comes with UMI-designed Delrin bushings, chromoly cross shafts, and polyurethane bump stops, and is track-tested to ensure top quality that is ideal for the street, drag, Pro-touring, or autocross car. UMI Performance offers these upper A-arms in either a black or red powdercoat that will protect them and make them look great.
( 6 )
$719.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
