Turbosmart USA BOVs, Wastegates & More at Summit Racing

Turbosmart OPR V2 Oil Pressure Regulators

Turbosmart OPR V2 turbocharger oil pressure regulators provide rock solid oil pressure from a simple, inline return-less regulator that includes a serviceable and replaceable built-in 44-micron stainless steel mesh oil filter, which provides another layer of defense against debris in your engine oil damaging your turbocharger. The OPR V2s achieve target oil pressure through Turbosmart's patent pending flow control strategy, delivering a laminar flow of oil to your turbocharger, no matter the base engine oil pressure or temperature. Suitable for all known engine oils, the OPR V2s will down regulate any oil pressure to ensure the critical balances inside your turbocharger (exhaust drive, back, and charge pressures) are not compromised by over-pressurized engine oil causing consumption of oil and smoking. They eliminate trial and error with restrictors and orifice sizes, or the need to fit and plumb a return line to regulate pressure. Additional features: * Aluminum (6262 T-6) anodized body and valve * Output regulated oil pressure suits most turbochargers * Stainless steel (304) mesh oil filter * -4 AN inlet and outlet * 1/8 in. NPT sensor/gauge port * Directional inlet feed logic

4.67 out of 5 stars ( 3 )

$138.46

Turbosmart Gen-V Race Port Blow-Off Valves

Turbosmart Gen-V Race Port blow-off valves are small, lightweight, high performance components for forced-induction competition level engines. Featuring unique collar designs and internal flow structures, they are 46 to 50 percent lighter and 25 percent smaller than the competition, while flowing 330 cfm, making Turbosmart Gen-V Race Port blow-off valves the highest flowing BOVs of their type on the market. They are offered in several different anodized colors and versions to fit your race application. All are supplied with vacuum fittings, V-band assemblies, and installed springs. Additional features: * Billet 6000 Series aluminum construction * Quick-release V-band collar for ease of installation and removal * MIL-Spec hard-anodized valve guide and stem * High-temperature silicone Nomex® diaphragm * Twin 1/8 in. NPT pressure ports for convenient positioning * 2.0 in. inlet flows over 330 cfm * Collar secured cap for quick spring changes * Most Race Ports have blue spring rated -18 to -14 InHg installed * Female flange version available to suit other manufacturer's 50mm flanges (no weld-on fitting supplied) and is 46 percent lighter * HE (Hall Effect) sensor cap versions allow you to monitor blow-off valve position for diagnostic or tuning purposes * Supercharger-specific versions have a soft pink spring rated -4 InHg installed, so it can stay open at idle, when supercharger is still producing boost

4.5 out of 5 stars ( 2 )

$324.95

—

$534.95

Turbosmart Vee Port Blow-Off Valves

Turbosmart Vee Port blow-off valves are an ideal choice if you're looking for high flow, small size, and value! These BOVs feature a unique, variable exhaust port system, providing for the superior venting of excess pressure. Turbosmart Vee Port blow-off valves are the simple, yet effective solution for your application.

4.83 out of 5 stars ( 6 )

$382.95

Turbosmart Gen-V Hyper-Gate 45 Mechanical Wastegates

Turbosmart Gen-V Hyper-Gate mechanical wastegates are a direct-fit upgrade to all 4th-generation Turbosmart wastegates. Gen-V models feature a unique collar-locking system, rotatable actuator, strap-type V-band clamps, 1/8 in. NPT ports, and optional liquid cooling. The units are built with a cast stainless steel housing, aluminum top, and anodized finish—for a great-looking wastegate under any hood!

Not Yet Reviewed

$466.95

—

$471.95

Turbosmart Gen-V WG50 Pro-Gate Wastegates

Turbosmart Gen-V WG50 Pro-Gate external wastegates are cost-effective, high-performing 50mm units. They provide extensive user configurability, world-leading extended thermal performance, fatigue resistance and best-in-class flow performance for optimum control and longevity. A direct-fit upgrade to all 4th-generation Turbosmart wastegates, the Gen-V features a unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, liquid-cooling, 1/8 in. NPT ports—and provides a range of springs.

5.0 out of 5 stars ( 1 )

$555.95

—

$561.95

Turbosmart e-Boost 2 Boost Controllers

Install smarter boost management with Turbosmart e-Boost 2! These electronic boost controllers give you ultimate control over the boost curve with smart features designed to get results. Engineered to win, Turbosmart e-Boost 2 boost controllers lead the class with 60 psi max boost operating pressure. They allow you to control, monitor, map, and compensate boost, plus control water spray, methanol or nitrous injection, manage shift/warning lights, and read/monitor rpm! Their state-of-the-art software is easy and logical to use, so you can confidently control all aspects of the boost curve--set point, gate pressure, and sensitivity. Whether you have a top-level racer or street-going vehicle, if it's turbocharged, make it Turbosmart-charged with Turbosmart e-Boost 2 boost controllers!

5.0 out of 5 stars ( 2 )

$582.29

—

$689.95

Turbosmart Boost Tee Boost Controllers

Set it and forget it with Turbosmart boost tee boost controllers! These smaller and lighter manual boost controllers offer precision power, durability, and the biggest bang for your buck. Turbosmart boost tee controllers are easy to install and are cost-effective in controlling the amount of pressure going to your wastegate via their gated boost control valve. Built from high-grade brass and aluminum, these controllers allow for easy boost adjustment from under the hood with their accurate, proven detent system. Under the hood boost tees are ideal for many applications from mild to wild! Improve your turbo response and performance with Turbosmart boost tee boost controllers.

5.0 out of 5 stars ( 1 )

$98.39

—

$103.95

Turbosmart Comp-Gate 40 Wastegates

Turbosmart Comp-Gate 40 wastegates are a suitable choice for all street and race turbocharged vehicles with an external wastegate turbo system. These wastegates are designed to fit into tight engine bays, while still offering superior flow and heat-handling capabilities. Turbosmart Comp-Gate 40 wastegates feature a revolutionary actuator housing that allows for easy spring changes and gives you the ability to index the cap orientation in 12 different positions.

4.83 out of 5 stars ( 6 )

$335.73

—

$403.95

Turbosmart Gen-V HP Comp-Gate Wastegates

Turbosmart Gen-V HP (high-pressure) comp-gate external wastegates feature a new unique appearance, Gen-V architecture, more options, and more boost. Upgrades include their modularity, improved thermal management, water cooling options, and even more gate flow than ever before. Turbosmart answered the needs of the diesel tuning community years ago with their HP wastegate range. These Gen-V units take all the advances in design and entineering—such as water cooling, rotating housing, industry-leading gate flow, and 1/8 NPT reference ports—and pushes the results to new heights. The new Gen-V HP springs options alone mean as much as 50 psi of base spring pressure. Included in the box is the new Gen-V HP mechanical wastegate with 35 psi worth of pre-loaded springs (10 psi inner and 25 psi outer), all inlet and outlet weld flanges, valve seat and clamps, and basic reference port fittings needed to get set up and running. These wastegates are available in different external relief diameters.

Not Yet Reviewed

$604.95

Turbosmart Kompact Dual Port Blow-Off Valves

Turbosmart Kompact dual port blow-off valves offer high performance, OEM fitment, versatility, and affordability—in other words, everything you need! These BOVs feature dual ports that vent into both the atmosphere and the air intake, reducing turbo lag and eliminating cavitation. Turbosmart Kompact dual port blow-off valves are designed to be bolt-on replacements for plastic factory Bosch or Denso units. They use sequential timing to allow for quieter operation during normal driving, while still providing the benefits of a vent-to-atmosphere type BOV under race conditions. They are easily converted into full atmospheric or full bypass units by using the included port blanking plug.

4.54 out of 5 stars ( 28 )

$207.95

—

$482.95

Turbosmart StraightGate50 Pneumatic Wastegates

Turbosmart StraightGate50 vacuum wastegates are zero-offset butterfly-style units that allow enormous flow and almost linear control, and unparalleled boost control throughout the entire operating range. These high-flowing wastegates are simple to use, and packed with performance, flow, and features. The zero-offset butterfly valves are subjected to exhaust drive pressure equally on both halves of the valve, which pivots centrally, resulting in a self-balanced valve against any drive pressure. This means less work is required to act against even the highest drive pressures, and a wider tuning window is possible, no matter how the valve is actuated. The increased flow is achieved through the efficiency of a straight-through valve versus a poppet-style valve where the exhaust gas must be turned 90 degrees by the valve. Turbosmart pneumatic StraightGate 50s are available in a boost-based pSG50 6 psi or vacuum-based pSG50v 6 InHg versions. Both pneumatics take the electronic eSG50 version and simplify control via a traditional boost-based or vacuum-based actuator. Select the one you prefer. Key features: * 50mm (1.97 in.) butterfly-style zero-offset valve * 383.9 CFM/10.87m3 per minute flow * Stainless steel (630) butterfly and shaft * Stainless steel (347) main body * Stainless steel, heat-treated 431, V-band clamps * 6262 T-6 anodized aluminum bracket and actuator * Turbosmart unique locking collar ring * Base spring options from 6 psi to 42 psi * Suitable for single or twin port boost-based control * Stainless steel (N60) linkages and control arm

Not Yet Reviewed

$729.95

Turbosmart Power-Gate 60 Wastegates

Turbosmart Power-Gate 60 wastegates outperform other wastegates in their class with a superior flow path and high temperature resistance. These 60mm external units feature a solid, one-piece coated stainless steel valve, and a shielded diaphragm housing that ensures excellent heat-handling capabilities. They're available with a range of setups and base pressures to suit your needs. Power-Gate 60 wastegates are ideal for extreme performance turbocharged engines with external wastegate turbo systems.

Not Yet Reviewed

$592.97

—

$708.95

Turbosmart EM Plum Back Upgraded Diverter Valves

Turbosmart Plumb Back EM upgraded diverter valves combine the SEMA Award-winning EM Vehicle Integration technology and tried-and-tested BOV5 architecture. Featuring a return hose for high-flowing plumb back performance and a direct-fit billet aluminum valve utilizing a 38mm / 1.5 in. positive seal piston, these valves will provide enough flow even for seriously modified vehicles while happily working on the factory and mildly tuned cars. The Turbosmart Patented EM System allows full integration with the factory electronics of later model vehicles. Some car manufacturers have taken to fitting electronic solenoid-actuated diverter valves—and have done this to use the valve for several other purposes outside the traditional use, such as when lifting the throttle, etc. EM Technology allows full integration with these systems and the motorsport-proven reliability and performance of a mechanical, piston-based valve. Additional details: * EM 'Electro-Mechanical full OE integration * True plug-and-play recirculating upgrade * 100 percent recirculating for OE integration * High-flow BOV5 design for high boost and upgraded power levels * 38mm /1.5 in. coated aluminum positive seal piston * Boost-balance valve technology * Black anodized for a low-profile, high-quality appearance * Black silicon hose return pipe

5.0 out of 5 stars ( 1 )

$382.95

Turbosmart Hyper-Gate 45 Wastegates

Turbosmart Hyper-Gate 45 wastegates offer maximum flow in a small package. These 45mm wastegates feature a unique locking collar design for a reduced size and quicker spring changes. Turbosmart Hyper-Gate 45 wastegates are suitable for medium-large capacity street and race engines with medium-frame turbocharger systems.

5.0 out of 5 stars ( 4 )

$429.95

Turbosmart Kompact EM Dual Port Blow-Off Valves

Turbosmart Kompact EM dual port blow-off valves vent to the atmosphere and back into the air intake. These EM (Electro-Mechanical) BOVs are true plug-and-play upgrade replacements featuring a leak-proof design, lightning fast actuation, and higher pressure handling capabilities, making them high performance substitutes for your factory plastic units. They also allow you to retain complete OE control of their operation. Turbosmart Kompact EM dual port blow-off valves are all-billet CNC construction with high temperature seals and the latest patented technology. They are must-haves for hybrid or larger flowing turbos that utilize OE electronic diverter valves. By not leaking, the EM will achieve target boost without stressing the turbocharger and wastegate. Key features include: * Patent pending integrated pressure control * True plug-and-play upgrade * Integrated proprietary high-temperature solenoid valve * Billet construction with high-temperature O-rings

5.0 out of 5 stars ( 4 )

$303.95

—

$576.95

Turbosmart Murray Hose Clamps

One of the world leaders in specialty clamps, Murray Corporation, has joined forces with Turbosmart to supply the performance market with these innovative Turbo-Seal series specialty worm drive clamps. Manufactured by Murray for Turbosmart, these Murray hose clamps are designed to compensate for the effects of thermal cycling and/or the compression set of the hose. Turbo-Seal's convoluted spring-action outer band solves this problem. They also feature a unique inner band profile to provide superior sealing pressure via its two raised ribs and chamfered edges to eliminate damage to the hose when tightened. Murray's unique Dual Bead Shield concentrates band sealing pressure, thus increasing performance by up to 30 percent over standard smooth liners. Turbo-Seal tension clamps are offered in several configuration sizes.

4.46 out of 5 stars ( 13 )

$8.95

—

$36.95

Turbosmart Ultra-Gate 38 Wastegates

Turbosmart Ultra-Gate 38 wastegates are small and light, but offer maximum flow. These 38mm external wastegates feature a unique locking collar design for quicker spring changes, along with a one-piece stainless steel valve.

5.0 out of 5 stars ( 4 )

$372.95

Turbosmart e-Boost Street Boost Controllers

Attention--use Turbosmart e-Boost Street boost controllers with extreme confidence! These no-nonsense electronic controllers offer track-proven technology to achieve the results that you want from your street machine. Turbosmart e-Boost Street controllers feature 40 psi max boost operating pressure, two boost settings, a boost correction factor, auxiliary output, and an easy-to-read, 3-segment display with adjustable brightness and a flash warning. You control the set point, gate pressure, and sensitivity to afford the boldest performance from your street-tuned car. Install the track-trusted, street-ready reliability and performance of Turbosmart e-Boost Street boost controllers.

4.25 out of 5 stars ( 4 )

$375.00

Turbosmart BlackBox Electronic Wastegate Controllers

The BlackBox by Turbosmart is a dedicated electronic wastegate controller which can be used in cooperation with a range of factory, aftermarket, and Motorsport ECU's. The BlackBox wastegate controllers provide protection from the current demands and translation of basic, as well as more advanced boost control strategies into a gate position and can be used on single, or twin electronic wastegate systems for the ultimate in boost control. The BlackBox is a dual-channel, high-current capable H-bridge driver for use with the Turbosmart range of electronic external wastegates—including the StraightGate50, as well as Turbosmart's electronic poppet style gates including CompGate40, HyperGate45, ProGate50 and PowerGate60 electronic Wastegates. Additional features and benefits: * Capable of multiple strategies, the BlackBox will accept PWM (Pulse Width Modulation) inputs as used for traditional boost control solenoids, 0-5 V position target, CAN position target and CAN bus override for more advanced ECU's where control strategy can be developed natively * The Blackbox provides for auto-calibration of Electronic External Wastegates via a full sweep and includes over temp safety features using the temperature sensor inputs * The BlackBox is pre-configured with the flow vs. lift calibration data of all Electronic Actuated Wastegates from Turbosmart for simple setup and accurate boost control * Settings can be adjusted via a simple USB connection and PC based application and unlimited control strategies can be implemented with the CAN based override system where your strategy is limited only by your ECU's capability

Not Yet Reviewed

$624.95

Turbosmart In-Cabin Boost Controllers

You're in the driver seat for boost control with Turbosmart! Their in-cabin boost controllers provide enthusiasts like you with boost adjustment on the run! Turbosmart manual boost controllers are manufactured from high-grade brass and aluminum, easy to install, and offer the most cost-effective way of controlling the amount of pressure going to your wastegate. In-cabin controllers feature a detent system for ease of adjustment and a gated system to bring the boost on faster. Turbosmart in-cabin boost controllers are strong, lightweight, and they put you in control from the driver seat of your turbo machine.

Not Yet Reviewed

$145.95

Turbosmart Kompact Plumb Back Blow-Off Valves

Turbosmart Kompact plumb back blow-off valves replace your factory BOV with higher performance! These bolt-on replacements offer a smart choice in OEM fitment and value. Kompact blow-off valves are built tough from black anodized aluminum, providing superior flow and greater structural integrity under boost. Turbosmart flange-type plumb back blow-off valves are available in a range of styles to fit many models—especially those with constrained engine bay access. They're full recirculating, directing all excess pressure back into your intake system. Swap out your factory plastic units for reliability, quality, and value with these Turbosmart Kompact plumb back blow-off valves.

3.88 out of 5 stars ( 8 )

$155.95

—

$267.95

Turbosmart Gen-V WG50CG Pro-Gate Compressed Gas Wastegates

Turbosmart Gen-V WG50CG Pro-Gate compressed gas wastegates are cost-effective, high-performing 50mm units. They're designed for control strategies that actively bias the top chamber with high pressure for large boost bandwidth operation, such as CO2 drag racing or compressed-air WRC applications. A direct-fit upgrade to all 4th-generation Turbosmart wastegates, they feature a unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, optional liquid cooling, 1/8 in. NPT ports—and provide a range of springs. Turbosmart Gen-V WG50CG Pro-Gate compressed gas wastegates are engineered to win!

Not Yet Reviewed

$521.54

Turbosmart Wastegate V-Band Clamps

Turbosmart wastegate V-band clamps make installing your external wastegate easier. These clamps are designed to work with Turbosmart's flanges to create a quick connection that is strong and will prevent unwanted exhaust leaks. Turbosmart holds these clamps to the tightest standards to ensure the best fit and function possible, so you have one less thing to worry about. To make finding the right one easy, Turbosmart offers their wastegate V-band clamps in a variety of sizes to fit all of their wastegates.

5.0 out of 5 stars ( 2 )

$41.95

—

$47.95

Turbosmart ProOPR Rising Rate Turbo Oil Pressure Regulators

Turbosmart ProOPR regulators are designed for large turbocharger systems and high boost levels where additional pressure and confidence is required at high boost, high shaft speed, and horsepower levels. These rising rate oil pressure regulators are boost referenced, not unlike your fuel pressure regulator, and allow lower oil pressure at lower boost pressures and increase oil supply pressure to the bearing system at higher boost levels. Turbosmart ProOPRs feature a twin outlet system that also creates a "T" in your turbocharger oil supply line for simplicity of plumbing and connection for up to two turbochargers. And while they have a returnless inline design, they use a boost reference to create a pressure differential, targeting the appropriate bearing pressure at low and zero boost pressure to eliminate your turbocharger digesting oil, while also providing increased oil pressure at higher boost levels to provide increased protection and confidence. Additional features: * Aluminum (6262 T-6) anodized body and valve * 1/8 in. NPT sensor/gauge port * 1/8 in. NPT boost reference port * 4 AN inlet * 1/8 in. NPT regulated oil outlets

Not Yet Reviewed

$219.95