Availability
To satisfy the air and fuel demands of your high performance machine, insist on the airflow expertise of Trick Flow Specialties. Trick Flow engineers have...
To satisfy the air and fuel demands of your high performance machine, insist on the airflow expertise of Trick Flow Specialties. Trick Flow engineers have developed some of the most advanced cylinder heads and intake manifolds in the industry, all thoroughly dyno-tested in-house to make sure they deliver proven results. To take your engine to the next level, Trick Flow manufactures performance camshafts, rocker arms, and other valvetrain components, plus fuel pumps, filters, and injectors. And Trick Flow teams up with other top performance manufacturers to produce supercharger kits, cold air intake kits, gasket...
To satisfy the air and fuel demands of your high performance machine, insist on the airflow expertise of Trick Flow Specialties. Trick Flow engineers have developed some of the most advanced cylinder heads and intake manifolds in the industry, all thoroughly dyno-tested in-house to make sure they deliver proven results. To take your engine to the next level, Trick Flow manufactures performance camshafts, rocker arms, and other valvetrain components, plus fuel pumps, filters, and injectors. And Trick Flow teams up with other top performance manufacturers to produce supercharger kits, cold air intake kits, gasket sets, and more. If you want Ultimate Bolt on Performance! you want Trick Flow under your hood.
Trick Flow® 5.0L R-Series EFI NOS hardware kits include the hardware that you need to run nitrous with your Trick Flow® manifold. Kits include: * Five 5/16-24NF 12 pt. nuts * Two 5/16-18 x 7 1/4 in. long chrome socket head cap screws * Two TFS R-Series upper/lower flange gaskets * Five 5/16 x 3 in. long studs
Not Yet Reviewed
$52.99
These Trick Flow® 5.0L Box R-Series EFI NOS hardware kits include the hardware that you need to run nitrous with your Trick Flow® manifold. Kits include: * Six 5/16-24NF 12 pt. nuts * Two 12 pt. bolts 5/16-18 x 7 in. long * Two TFS R-Series upper/lower flange gaskets * Six 5/16 x 2 in. long studs * Ten 1/4-20 x 1 1/4 in. long button head screws * One flange plate gasket
Not Yet Reviewed
$42.99
These Trick Flow® TFX™ nitrous oxide spray bar installation kits allow owners of Trick Flow® box R-series intake manifolds to install a Trick Flow® TFX™ nitrous oxide system. The kits include new box upper-to-lower manifold gaskets and 3 in. studs to accommodate the added height of the nitrous spray bar.
( 1 )
$42.99
These Trick Flow® 5.0L Street EFI NOS hardware kits include the hardware that you need to run nitrous with your Trick Flow® manifold. Kits include: * Four 5/16-24NF 12 pt. nuts * Two 5/16-18 x 7 in. long 12 pt. bolts * Two TFS Street/Track Heat upper/lower flange gaskets * Four 5/16 x 2 5/8 in. long studs
Not Yet Reviewed
$43.99
Keep your engine running at peak performance at the track with the TFS Track Cap. With a 16 spark plug capacity, the Track Cap allows you to store one set of gapped, ready to use, new plugs and keep your old plugs in the order they were removed to aid in making air/fuel and timing decisions a breeze. When you're ready to turn it up a notch, the carb and nitrous jet storage holes are there to help you keep your jets organize. No more dumping a bag of jets and searching for the winning tune up!
Not Yet Reviewed
$39.99
Get maximum performance out of your small block Ford with Trick Flow® R-Series intake manifolds. They deliver substantial power increases in the 3,500-7,500 plus rpm range on heavily modified street/strip and race engines. Plus, they're made from A319 aluminum for lighter weight, have integral bosses for nitrous or fuel injection nozzles, and extra material for custom porting. For use with square bore four barrel carbs.
( 8 )
$411.99
—
$416.99
Intended for 500-plus inch, high-rpm engines, Trick Flow® R-Series intake manifolds for Ford 429/460 provide significant horsepower and torque increases. These single plane intake manifolds feature a one-piece, spider-type design with high-flow, individual extended runners and a raised plenum floor. Other features include A319 aluminum construction, extra material for custom port work, and bosses for nitrous or fuel injection. The intake manifolds are designed for use with Holley 4500 Series Dominator carbs. Overall height to carburetor mounting pad is 8.600".
( 8 )
$724.99
Turn up the heat up on big performance with Trick Flow® Track Heat® intake manifolds for your Ford 351C or Clevor. These single plane aluminum manifolds feature a high-rise, one-piece spider design and high-flowing individual extended runners for significantly more power in the 3,000-7,000 rpm range. Other features include OE 2V port locations and dimensions, a raised plenum floor for increased flow velocity and fuel atomization, integral bosses for nitrous or fuel injection nozzles, and extra material for custom porting. The manifolds will work in all 2V and 4V applications and with all square bore four barrel carbs.
( 8 )
$411.99
Trick Flow® replacement EFI upper intake plenums are computer-modeled to produce maximum torque and horsepower. The runner length and cross-sectional taper have been optimized to improve airflow throughout the rpm range—and the symmetrical, high-velocity ports distribute the air/fuel charge evenly to every cylinder. These A319 aluminum castings work well with nitrous and fit under most stock-height hoods for an easy bolt-on installation. They're available in several styles and finishes for Ford 5.0L, 351 Windsor, 4.6L 2V, 351C, and Clevor engines. The plenums must be used with corresponding Trick Flow® lower intake manifold base.
( 17 )
$374.99
—
$824.99
Trick Flow's R Series Intake Manifold is tailored around big cubic inch small block engines producing 600+ horsepower in the 3,500-7,500+ RPM range. Engineers at Trick Flow optimized the R Series intake for their Super 23® 230cc cylinder heads, but found it also performs extremely well on Trick Flow's Super 23® 215cc cylinder heads as well as other brand heads with 215cc and larger ports. The secret to the manifold's success is its CAD-optimized plenum and runner design. Trick Flow engineers incorporated a one-piece single plane, spider type design with a raised floor and a large open plenum, paying special attention to smooth airflow for equalized air and fuel distribution. The design was optimized to eliminate excess material where possible, but enough was left around the port openings so the manifold can be port matched and/or fully ported. Casting it in A319 aluminum keeps the weight low, and integral bosses cast into each runner can be drilled and tapped to accept nozzles for nitrous applications. To back up all the engineering and great features, Trick Flow dyno tested the R Series Intake Manifold to ensure it can propel you to the front of the pack!
( 4 )
$449.99
What's tall, good-looking, and makes tons of power? Trick Flow's® R-Series intake manifold for Mopar 440! Trick Flow® engineers went to work when customers requested an ultra-performance intake manifold for large cubic inch, high-horsepower, big block Mopar engines. The key to the manifold's high-power production is the CAD-optimized, one-piece single plane runner design with a large open plenum—paying special attention to smooth airflow for equal air and fuel distribution. Nitrous users will be happy to find integral bosses that can be drilled and tapped for nozzles, while all engine builders will be glad that Trick Flow® left material around the port openings so the manifold can be port matched and/or fully ported. To keep weight as low as possible, the R-Series intake manifold is made from lightweight yet strong cast aluminum. When it comes to carburetion, you'll find that Trick Flow® machined on a Holley 4500 Dominator mounting flange for maximum performance potential. Designed to produce maximum power with Trick Flow's® PowerPort 270 cylinder heads on 440-based engines working in the 3,500-7,500 plus RPM range, the R-Series intake manifold also performs extremely well with other brand cylinder heads using 270cc and larger intake ports.
( 3 )
$524.99
Tear up the track with a Trick Flow® Track Heat® intake manifold! These aluminum dual plane manifolds feature a one-piece spider-type design with extended, high-flow runners and a raised plenum floor for more horsepower and torque. Other highlights include A319 aluminum construction, integral bosses for nitrous nozzles, and extra material for custom porting. These intake manifolds deliver peak power in the in the 3,000 to 7,000 rpm range and work with all square bore-style carburetors.
( 17 )
$499.99
—
$524.99
Trick Flow® Track Heat® intake manifolds are precision CNC-machined from A319 aluminum to reduce weight and give your small block Mopar engine more power. The manifold's one-piece spider-type design with extended high-flow runners and raised plenum floor provide significant increases between 3,000 to 7,000 rpm--right where it's needed the most. Trick Flow also provided extra material around the port openings for custom port matching and added bosses that can be drilled for nitrous nozzles. Any 4150-style square bore carburetor bolts up to the Track Heat intake, and with a carburetor mounting pad height of 5.125 in., the manifold should fit under most hoods.
( 5 )
$466.99
Trick Flow® R-Series A460 Intake Manifolds deliver significant performance gains in 500-plus cubic inch engines. They are single quad intake manifolds made from lightweight A319 aluminum and include bosses for nitrous or fuel injection. The special one-piece, spider-type design with high-flow, extended individual runners and a raised plenum floor produces sizeable power increases in the 3,500-8,000 rpm range. Additional highlights include extra material for custom porting and a Dominator-style carb mounting pad. R-Series A460 manifolds can only be used with Trick Flow® PowerPort® A460 series cylinder heads.
( 3 )
$749.99
Trick Flow® R-Series single plane intake manifolds for GM LS3 bring the simplicity of carbureted-style aspiration to GM's late model aluminum powerhouse. The intakes are engineered to produce supreme power in heavily modified engines with 3,500-7,500 plus RPM powerbands. Other significant features include A319 aluminum construction, a one-piece spider-type design, high-flow individual runners combined with a raised plenum floor, integral bosses for adding nitrous, and extra material for custom porting. The manifold accepts Holley 4150-style square bore carburetors. Overall height to the mounting pads is 6.285 in.
( 3 )
$424.99
Take the guesswork—along with meticulous work necessary for accurate port matching—out of dialing in your big cube engine build for huge power numbers with Trick Flow's R-Series 11R 227 port-matched intake manifold. The A319 aluminum manifold's CNC Competition Ported runner treatment has been specially designed and machined with perfect port alignment on Twisted Wedge® 11R 227 cylinder heads. The high-flow, one-piece spider-type single plane design with raised plenum floor puts the powerband in the 3,500-7,500-plus RPM range. Integral bosses allow adding nitrous nozzles. Accepts Holley 4150-style square bore carburetors.
Not Yet Reviewed
$674.99
Trick Flow High Port® 240 cylinder heads are specifically designed for large cubic inch small block Ford engines as well as engines with high-boost super- and turbocharges, big shot nitrous oxide systems, and other mega-power combinations. They feature unique valve spacing, .750" raised exhaust runners, extra strong castings and thick decks for additional rigidity and gasket integrity, superior cooling characteristics, and most importantly, excellent airflow. Top-of-the-line CNC Competition Ported runners with a high resolution surface finish provide maximum airflow and power over the entire rpm range. The entry into the intake runner has been reshaped to help seal the area along the port roof and thicker port walls increase strength and provide more material for porting. Plus, interlocking ductile iron seats are used to handle the stresses of high heat, high horsepower applications. Other features include fully CNC-profiled combustion chambers with port-to-valve seat blending (bowl blending) and raised valve cover rails.
( 4 )
$849.99
—
$1,649.99
Trick Flow® R-Series intake manifolds for small block fords are designed for maximum power delivery on heavily modified street/strip and race engines that operate in the 3,500-7,500+ rpm range--right where it's needed the most. Vital features include A319 aluminum construction, integral bosses for nitrous or fuel injection nozzles, and extra material for custom port work. These carb-style EFI manifolds accept standard Bosch or Siemens-type fuel injectors. Overall height to the mounting pad is 6.300 in. (5.0L/302) or 6.450 in. (351 Windsor).
( 4 )
$462.99
—
$468.99
Trick Flow® High Port® 225 cylinder heads are specifically designed for large cubic inch small block Ford engines as well as engines with high-boost superchargers or turbos, big shot nitrous oxide systems, and other mega-power combinations. They feature unique valve spacing, .750" raised exhaust runners, extra strong castings and thick decks for additional rigidity and gasket integrity, superior cooling characteristics, and most importantly, excellent airflow. Top-of-the-line CNC Competition Ported runners with a high resolution surface finish provide maximum airflow and power over the entire rpm range. The entry into the intake runner has been reshaped to help seal the area along the port roof and thicker port walls increase strength and provide additional material for porting. Plus, interlocking ductile iron seats are used to handle the stresses of high heat, high horsepower applications. Other features include fully CNC-profiled combustion chambers with port-to-valve seat blending (bowl blending) and raised valve cover rails. Trick Flow® High Port® 225 cylinder heads are available fully assembled or as bare castings and sold individually.
( 3 )
$849.99
—
$1,524.99
Trick Flow® single plane, rectangular port R-series intake manifolds for your big block Chevy features high-flowing extended runners and raised plenum floors to increase horsepower and torque. They are designed for 500-plus cu. in. engines and deliver maximum power between 3,500 and 8,000 rpm. Plus, their integral bosses for nitrous injection and extra material for custom porting. For use with Dominator-style carbs.
Not Yet Reviewed
$699.99
Designed for engines that work in the 3,500-8,000 rpm range, Trick Flow® Track Heat® intake manifolds for your Ford 429/460 deliver race-like power and torque. These single plane high-rise manifolds feature a one-piece spider design, high-flow extended individual runners, a raised plenum floor for improved fuel atomization and flow velocity, integral bosses for nitrous or fuel injection nozzles, and extra material for custom porting. These Track Heat® manifolds are made from A319 aluminum and are for use with square bore four barrel carbs.
( 6 )
$699.99
Trick Flow® R-Series A460 Tunnel Ram Intake Manifolds were developed for all 8,000 plus rpm applications such as drag racing and tractor pulling. They feature a 2-piece design with interchangeable top covers so you can mount either single or dual Dominator-style carbs. They're made from thick-wall A319 aluminum for durability and the lower manifold feature bosses for nitrous and fuel injection nozzles. The lower manifold and top covers are sold separately; both pieces are required to make a complete manifold assembly. R-Series A460 manifolds can only be used with Trick Flow® PowerPort® A460 series cylinder heads.
( 2 )
$124.99
—
$849.99
Take the guesswork—along with meticulous work necessary for accurate port matching—out of dialing in your big cube engine build for huge power numbers with Trick Flow® R-Series 11R 205 port-matched carbureted intake manifold. The A319 aluminum manifold's CNC Competition Ported runner treatment has been specially designed and machined with perfect port alignment on Twisted Wedge® 11R 205 cylinder heads. The high-flow, one-piece spider-type single plane design with raised plenum floor puts the powerband in the 3,500 to 7,500-plus rpm range. Integral bosses allow adding nitrous nozzles. These manifolds accept Holley 4150-style square bore carburetors.
Not Yet Reviewed
$674.99
Trick Flow Twisted Wedge® Race 195 cylinder heads are perfect for big bore Ford Modular 2V engine builds as well as engines with superchargers or turbos, high compression E85, big shot nitrous oxide, and other mega-power combinations. The secret lies in the CNC-profiled Twisted Wedge combustion chambers and intake valves moved to the opposite side of the cam. These features provide dramatic increases in mid-lift airflow, piston-to-valve clearance, and valve-to-bore clearance for using higher lift cams and larger valves without altering bore size or flycutting pistons. Trick Flow Twisted Wedge Race 195 heads have fully CNC Competition Ported runners with a premium high resolution surface finish for ultimate performance. Larger, stronger valves and race-duty valvetrain components give these heads 8,000-plus rpm capability. Other features include OE PI-style intake inlets, patented replaceable cam bearing journals (no more junking heads because of trashed cams!), 3/4" thick decks, and 3/4"-reach spark plugs. Trick Flow Twisted Wedge Race 195 heads fit all 2V Romeo and Windsor engines and accept all OE-style camshafts, followers, lash adjusters, valve covers, and most OE Ford front covers. The heads are available fully assembled or as bare castings. Sold individually.
( 2 )
$1,449.99
—
$1,849.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
