Availability
Trail-Gear FJ-80 knuckle rebuild kits are available with or without wheel bearings. The kits contain all of the replacement parts you need to service your steering knuckles. Trail-Gear FJ80 knuckle kits will service both left and right knuckles. Trail-Gear FJ-80 knuckle rebuild kits typically include: * Gaskets, felts, seals, washers and shims * Inner axle seals and outer felt covers
( 5 )
$129.99
—
$199.99
Trail-Gear solid axle steering kits support your determination to put together your own SAS kit to lift your first-generation Tacoma. How, you ask? When you have trouble finding the right parts to link your steering to an IFS steering box, you know the answer--Trail-Gear. These TG solid axle kits utilize the same steering parts from their own SAS kits to take the guesswork out of making your own steering linkage. You'll receive an adjustable-length double-D steering shaft, a firewall plate, a steering shaft seal, and U-joints for both ends of the shaft. Trail-Gear is ready to lend a hand with their solid axle steering kits.
Not Yet Reviewed
$379.99
Got a broken OE rubber motor mount? Trail-Gear Bomb Proof engine mount kits offer the quality and strength you need. The base of these motor mounts is made from 1/4 in. plate. The surface plate that the motor sits on is made out of 3/8 in. material and has a Class 10.9 bolt that is mechanically locked to the engine mount plate--not just threaded in. Bomb Proof mounts are given a silver zinc plating that looks sharp and will last a lifetime. The bushings are made out of high-grade polyurethane for added durability, and the mount holes are slotted so that your install is easy. Upgrade your vehicle to Trail-Gear Bomb Proof engine mount kits.
( 9 )
$189.99
Trail-Gear heavy-duty steering kits solve feedback issues caused through the stock steering setup. Bigger tires and a lifted suspension are necessities for off-roading today—unfortunately, the combination can cause problems. TG kits will reduce steering vibrations, so you can enjoy a more comfortable driving experience. They offer kits for multiple applications that will strengthen your setup for more assurance on the trails. Trail-Gear steering kits include right and left-hand thread heavy-duty FJ80 tie rod ends, drag link, and hardware. The tie rods and drag link are made from hefty 1/4 in. thick wall DOM tubing. Your choice of kit may also include steering stabilizer with 9 in. stroke and hardware, or a hard-to-find 1:10 taper reamer for reaming out your stock pitman arm and steering arms.
Not Yet Reviewed
$399.99
Trail-Gear reinforcement plates will help avoid the common trail vehicle frame issues of bending and cracking on even the strongest chassis. They often need added support to strengthen them for their favorite pastimes, on and off the road. Trail-Gear thick steel weld-in plates eliminate the weak spots for long riding enjoyment.
( 2 )
$99.99
—
$199.99
Providing improved power steering for off-roading, Trail-Gear power steering pumps replace your stock models with high-performance reliability. Their TC-style pumps are built to handle extreme heat, with each one receiving a bench test to ensure quality. They are available in two styles -with or without an anodized aluminum pulley. When you are on the road, stock is okay--but for off-road, you need trail-tested gear. Order the Trail-Gear power steering pumps best suited for your application.
( 6 )
$399.99
—
$899.99
Trail-Gear Power Flow power steering pump upgrade kits remedy a common flaw in Toyota trucks. The stock pump is just barely able to supply the volume and pressure needed to run hydraulic-assist steering—putting out 1,300 psi at only one gallon per minute. The original pump is not able to provide enough fluid to run both the stock steering and the demands of a ram, especially at low rpm. Drilling out the restrictor plates in a stock pump for more volume often leads to pump failure. The answer is a replacement "TC" style pump. This provides the full fluid volume your steering box and ram are looking for, even at idle. These kits include a 1,650 psi pump, pump bracket, reservoir, reservoir bracket, belt, fittings, hoses, and hardware. The pump kits are designed to work with stock or ram drilled IFS power steering boxes. Additional notes: * The pump and bracket are designed to fit all Toyota 4-cylinder 4WD motors from 1979-95 * A large power steering fluid cooler (included) is required on the low-pressure side of the system * Pump bracket works in conjunction with stock idler bracket * If your truck is not currently equipped with power steering, you will need to purchase the idler bracket and replace the steering gearbox with one designed for use with power steering * The stock fan belt will not work with this pump and will need to be replaced with a Napa 9430 belt. Belt is included with kit. * Note: Never use ATF fluid or a semi-synthetic blend. This will void the warranty. It's okay to use standard power steering fluid or a full synthetic.
( 2 )
$899.99
Off-roading can be such an adrenaline rush! Unfortunately, it can also take its toll on your vehicle's suspension. No worries, Trail-Gear heavy-duty FJ-80 tie rod ends are available in right-hand threaded and left-hand threaded applications to keep your suspension fine-tuned for trail blazing action. They're greased to ensure the flow of lubrication throughout the part and are sealed to keep out dirt. A cotter pin and jam nut are included. Get the most out of your off-road experience with Trail-Gear suspension parts!
( 4 )
$29.99
Trail-Gear spindle nuts replace your wheel bearing retainer nuts. Usually, your stock nuts and star washers can be used several times, but with the added maintenance of an off-road rig, they probably need to be replaced. Choose these Trail-Gear kits that include two nuts, a star washer, and a flat index washer to get 'er done right!
( 8 )
$14.99
—
$69.99
Now available with a heavy-duty 25 percent higher spring rate, Trail-Gear Super Flex front leaf springs are perfect for heavier trucks and 4Runners that need that extra strength for the trail. They are also great for V6 and V8 engine swaps. Remember, if you install a heavier engine, it may be a good idea to improve your suspension. Otherwise, it's like asking your ride to do the same trail while overloaded with weight. It may get you to the trail faster, but those hills and terrain may just be too much for it to run that chassis and engine over. With these Trail-Gear Super Flex springs engineered to hold their arch and lift longer, your ride will be able to handle the weight and the trail.
( 3 )
$599.99
Replacement bushings designed to fit Trail-Gear leaf springs are made of polyurethane to slide over the bolt smoothly with just the right amount of give to prevent your fittings from falling out when you're greasing up. Polyurethane is harder and stronger than rubber for durability and ride quality. Restore positive handling and control with Trail-Gear bushings. (Note: Make sure the grease you use is compatible with polyurethane.)
( 4 )
$49.99
Trail-Gear steering knuckle replacement components are significantly stronger than OEM standards to make the most of your newer replacement steering arms. TG should be your first choice for knuckle hardware when repairing or upgrading your high-steer system.
( 3 )
$1.99
—
$16.99
Trail-Gear tie rod tubes are made from heavy-duty 1.25 in. x .250 in. wall DOM tubing that is precision tapped and powdercoated. Each of these TG rods are test fitted to ensure rod ends thread-in with the correct fit. Trail-Gear tie rod tubes are available in three lengths.
( 1 )
$129.99
Trail-Gear frame box kits will brace your C-channel frame to help you avoid costly repairs. These kits strengthen your chassis with two thick steel plates and pieces of DOM tubing for reinforcement and upper shock mounting. The upper shock mount tube comes with metal sleeves and all the necessary hardware. Trail-Gear can help you fix your frame issues for even heavy off-road use.
Not Yet Reviewed
$149.99
Trail-Gear differential carrier drop spacers and shims replace the crush sleeve and prevent the loosening of the gear setup preload. They take a little longer to set up, but you won't have to keep retorquing the pinion nut down the road to keep the proper angle on the CV joints and boots. With their easy-to-follow installation instructions, you can install these kits and be back on the trail with a smoother ride in minutes.
( 7 )
$29.99
Built to handle whatever the trail can throw at you, these Trail-Gear rear leaf springs are engineered to keep the rear of your vehicle traveling smooth and stable. Featuring a full military wrap on the front and a 1/4 on the rear, these springs will keep your rear riding right, no matter the terrain. Packed for power, they are built seven leafs strong, with an additional special torque leaf to reduce axle wrap. Keep the rear of your vehicle up and your springs strong, with these Trail-Gear rear leaf springs.
( 2 )
$699.99
Building a fully hydraulic steering system can be quite a project. Thankfully, Trail-Gear has taken all of the guesswork out of the process with these complete, user-friendly hydraulic steering kits! Everything you will need is included, such as mounting brackets specifically designed for Toyota apps. The steering pump has an all-steel housing and emits 4.5 gpm of flow and 1,650 psi of pressure. Each high-pressure hose is steel-braided with crimped-on ends. These kits are available in 6, 8, and 10 in. ram sizes, and are ideal for use with links and most leaf spring applications. Kits include: * 6, 8, or 10 in. double-ended ram and clevis kit * Orbital (100 ml, 125 ml, or 160 ml) * Full hydraulic steering pump with pulley * Tie rod kit * Double-ended ram mounting kit * Steering column * Orbital mounting kit * Reservoir with filter * Cooler * Power steering belt * Complete hose kit * All necessary hardware
( 4 )
$2,499.99
Trail-Gear steering U-joints are designed for their Tacoma SAS steering shaft. These heat-treated steel U-joints include hardware to easily connect shaft to steering column.
( 1 )
$49.99
Trail-Gear Suzuki Power Flow steering boxes were designed and engineered to provide ultimate performance for Samurai power steering swaps, as well as Sidekicks and Trackers with hydro-assist steering. These boxes are modeled after the factory box found in the 1989-98 Suzuki Sidekicks. Trail-Gear Suzuki Power Flow steering boxes come pre-tapped for hydraulic-assist and the plugs can be opened without removing the steering box from the vehicle.
Not Yet Reviewed
$690.99
Specifically designed for Toyota Tacoma trucks, the Trail-Gear Rock Defense dual T-case crossmembers provide a sturdy secure transfer case mount, while also providing superior transfer case protection while sliding across any rocks your vehicle can tackle. The Rock Defense T-case crossmembers are made from 3/8 in. thick 1010 steel, so you have confidence that your transfer case is supported and covered when you are sliding over even the nastiest rocks. These crossmember kits can be mounted either by drilling the frame and bolting the crossmember in, or simply by welding the crossmember mounting brackets to the frame and bolting the crossmember to the mounting brackets. Trail-Gear also offers single transfer case crossmember kits. Both dual case and single case crossmembers use the same mounting brackets, so that once you have your single case brackets installed, there is no need to change them when upgrading to dual cases. You simply bolt dual case crossmember into the same bracket, all that is needed is an additional T-case mount. Features and benefits: * Fits 1995-2004 Tacoma T-cases, automatic and manual transmissions, and uses your stock T-case mount(s) * Rock Defense T-case crossmember kits can be mounted either by drilling the frame and bolting the crossmember in, or simply by welding the crossmember mounting brackets to the frame and bolting the crossmember to the mounting brackets * Supplied mounting brackets are 1/4 in. thick 1010 steel and all necessary Grade 8 mounting hardware is included with top locking nuts * Both single and dual case crossmembers use the same mounting brackets, so that once you have your single case brackets installed, there is no need to change them when you upgrade to dual cases—simply bolt the dual case crossmember into the same bracket, all that is needed is an additional T-case mount (sold separately) * Crossmembers are shipped unpainted and should be painted or powdercoated before being installed
Not Yet Reviewed
$399.99
Trail-Gear leaf spring shackle and hanger kits make it easy to install shackle tubes in your frame. Kit includes frame tubes, tube jigs, offset hanger with gussets, and offset shackles. Trail Gear specializes in suspension and off-road products.
( 5 )
$279.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
