Availability
Trail-Gear heavy-duty transfer case mounts can handle the abuse of rock crawling and the ultra-low torque of dual cases. Stamped out of 1/4 in. thick steel plate and then welded on a jig to ensure the best fit possible, these mounts are fitted with polyurethane bushings and coated with zinc for lasting performance and durability. Eliminate the worries of a busted T-case mount on the trails with the installation of bomb-proof Trail-Gear heavy-duty transfer case mounts.
( 5 )
$149.99
Got a broken OE rubber motor mount? Trail-Gear Bomb Proof engine mount kits offer the quality and strength you need. The base of these motor mounts is made from 1/4 in. plate. The surface plate that the motor sits on is made out of 3/8 in. material and has a Class 10.9 bolt that is mechanically locked to the engine mount plate--not just threaded in. Bomb Proof mounts are given a silver zinc plating that looks sharp and will last a lifetime. The bushings are made out of high-grade polyurethane for added durability, and the mount holes are slotted so that your install is easy. Upgrade your vehicle to Trail-Gear Bomb Proof engine mount kits.
( 9 )
$189.99
Mount up and hit the trails with Trail-Gear front or rear lower shock mounts. They're ideal for use on a straight axle swap and are made of thick 3/16 in. plate steel. The curved bottoms weld directly to the axle housing, horizontally or vertically, with 1/2 in. mounting holes.
( 6 )
$121.48
Outfit your front bumper with Trail-Gear winch mounts. These predrilled mounts are built from a CNC-bent 1/4 in. steel plate, and they bolt in the factory frame holes for a hassle-free install. TG built them with 2 in. receiver tubing so that you can use a receiver shackle for a pull point or a recovery point. If you're looking to build your own front bumper, Trail-Gear winch mounts are great starting points to secure your pulling power.
( 10 )
$199.99
Trail Gear offers transfer case mounts with a larger mounting surface than 4-cylinder units. These T-case mounts are stamped out of thick steel plate, then welded on a jig to ensure the best fit possible as a factory replacement for V6 Toyota models 1979-1995 pickups or 1985-1995 Toyota 4Runner. These units can also be used with Trail-Gear crossmembers (not included).
Not Yet Reviewed
$199.99
Trail-Gear reinforcement plates will help avoid the common trail vehicle frame issues of bending and cracking on even the strongest chassis. They often need added support to strengthen them for their favorite pastimes, on and off the road. Trail-Gear thick steel weld-in plates eliminate the weak spots for long riding enjoyment.
( 2 )
$199.99
If you need to relocate your rear shackle mounts in order to install longer suspension springs, it's the perfect time to upgrade to Trail-Gear leaf spring shackles. These 1/4 in. steel plate units are stronger than the original factory shackles, offering more security when scaling rough terrain. Trail-Gear leaf spring shackles will use your OEM bushings or stock replacements. Order the pair designed for your vehicle application.
( 5 )
$129.99
Trail-Gear offers door panels for a variety of applications, including many 1980s era Toyota trucks. OEM interior door panels don't hold up well to the ravages of weathering and off-roading. These ABS plastic interior door panels are a durable and economical replacement for your cracked or rotted originals. They're easy to clean, look great, and help quiet road noise. Sold in pairs, with plastic push rivets included to mount both panels securely. (Note: Models are available to fit manual or power window mechanisms. Order the correct panels for your vehicle.)
Not Yet Reviewed
$249.99
Trail-Gear creeper joints are also available in a shackle mount for use with leaf springs. Using a creeper joint on the shackle end of a leaf spring reduces spring binding and increases suspension flex. Creeper joint shackle mounts are sold in pairs and do not include the shackles, bolts, or spring bushings. Three different flex ball dimensions (9/16 in., 5/8 in., and 18mm) enable you to choose the right size to match your application. Additional details: * The outer shell is a single forged piece * The inner flex ball is made from 8620 tool steel and rides on high-quality polyurethane bushings * Heavy-duty, hardened steel washers hold the joint together * Allows for up to 40 degrees of movement when used with spacers * A threaded grease fitting is provided on top for lubrication * The flex ball is drilled for cross-lubrication flow from the shell to the link mount bolt * Toyota Pickup and 4Runner use 18mm size
Not Yet Reviewed
$110.49
Trail-Gear Rock Assault 9 steering arms are CNC-machined from 1018 billet steel, and are 1 1/4 in. thick with a keyway design for added engagement. Plus, they come with a 3/4 in. hole and room for additional holes to get the perfect steering setup! Rock Assault 9 steering arms feature an angled design that moves the tie rod mounting holes closer to the center of the vehicle, allowing wheels with a higher backspacing to be used. Match up your Rock Assault 9 knuckles with these Trail-Gear steering arms--and get ready to scale boulders!
Not Yet Reviewed
$199.99
Many off-roaders enjoy the appearance and functionality of beadlock rims--that keep the tire from spinning on the rim and also holds the tire in place at low pressures. Trail-Gear Creeper Locks sectional beadlock rings, mean that you no longer have to buy a full ring to replace a portion that's been damaged on the trail or track. Just choose individual sections at a fraction of the cost! These rings have an interlocking design with aggressive knurling for a better bite into the rubber. The aluminum is thicker, so bolt heads have deeper recesses, and multiple color options allow for a solid look--or a unique mix-and-match. Order one section, or a set of six! Mounting hardware is included.
Not Yet Reviewed
$206.85
Easy to install and tough as nails, Trail-Gear leaf spring hangers will allow you to move the hangers on the frame and install longer springs. Front and rear hangers are available to make this upgrade optimal. They will be much stronger than your stock hangers.
( 7 )
$149.99
Go from forward shift to top shift with Trail-Gear Top Shift conversion kits. TG's conversion "A" kits contain the parts you need to accomplish your conversion properly. The parts are all new and machined to accept 4.7 input gears. Trail-Gear Top Shift "A" conversions include shift rails, fork, fork tube, and roll pins.
( 2 )
$199.99
Trail-Gear leaf spring shackle and hanger kits make it easy to install shackle tubes in your frame. Kit includes frame tubes, tube jigs, offset hanger with gussets, and offset shackles. Trail Gear specializes in suspension and off-road products.
( 5 )
$199.99
Trail-Gear transfer case shifters are stock replacement shifter handles and base. Get back in gear faster with these shifters. They bolt in using your stock bolts and fit the top shift gear drive transfer cases on the vehicles noted in applications.
( 1 )
$139.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
