Availability
Looking for a steering box for your Toyota's steering system? Trail-Gear IFS remanufactured steering boxes are thoroughly flushed and rebuilt. All boxes are completely tested before shipping.
( 3 )
$699.99
Trail-Gear FJ-80 knuckle rebuild kits are available with or without wheel bearings. The kits contain all of the replacement parts you need to service your steering knuckles. Trail-Gear FJ80 knuckle kits will service both left and right knuckles. Trail-Gear FJ-80 knuckle rebuild kits typically include: * Gaskets, felts, seals, washers and shims * Inner axle seals and outer felt covers
( 5 )
$129.99
—
$199.99
Trail-Gear Power Flow power steering pump upgrade kits remedy a common flaw in Toyota trucks. The stock pump is just barely able to supply the volume and pressure needed to run hydraulic-assist steering—putting out 1,300 psi at only one gallon per minute. The original pump is not able to provide enough fluid to run both the stock steering and the demands of a ram, especially at low rpm. Drilling out the restrictor plates in a stock pump for more volume often leads to pump failure. The answer is a replacement "TC" style pump. This provides the full fluid volume your steering box and ram are looking for, even at idle. These kits include a 1,650 psi pump, pump bracket, reservoir, reservoir bracket, belt, fittings, hoses, and hardware. The pump kits are designed to work with stock or ram drilled IFS power steering boxes. Additional notes: * The pump and bracket are designed to fit all Toyota 4-cylinder 4WD motors from 1979-95 * A large power steering fluid cooler (included) is required on the low-pressure side of the system * Pump bracket works in conjunction with stock idler bracket * If your truck is not currently equipped with power steering, you will need to purchase the idler bracket and replace the steering gearbox with one designed for use with power steering * The stock fan belt will not work with this pump and will need to be replaced with a Napa 9430 belt. Belt is included with kit. * Note: Never use ATF fluid or a semi-synthetic blend. This will void the warranty. It's okay to use standard power steering fluid or a full synthetic.
( 2 )
$899.99
Trail-Gear Samurai high steer kits are specifically engineered to work with stock Samurai axles--and they're a must-have for a "spring over axle" setup. They include solid-forged 8620 steel steering arms, a heavy-duty 1 1/4 in. x .250 in. wall DOM drag link and tie rod, FJ80 tie rod ends, and all necessary hardware. There's even a hard-to-find 1:10 taper reamer for reaming out your stock pitman arm. As with all Trail-Gear products, installation is easy, and these high steer kits fit all Suzuki Samurai engines.
( 4 )
$599.99
Has it been a while since you serviced your knuckles? Trail-Gear knuckle rebuild kits contain all standard replacement parts, including gaskets, felts, seals, washers, and shims to do the job done right. They even include outer felt covers--a Trail-Gear exclusive! If you're using your truck in the rocks you will want to replace these covers when you service the knuckles. Kits are offered with or without wheel bearings. Service your knuckles with Trail-Gear knuckle rebuild kits.
( 4 )
$149.99
—
$199.99
After years of development and testing, Trail-Gear fully loaded Six Shooter kits have set a new standard for Toyota knuckle strength and reliability. They totally eliminate the problem of broken steering knuckles and studs. The addition of two studs in each arm effectively prevents the steering arm from becoming loose or shearing off the studs under extreme loads. The knuckle housing was designed with thicker-than-stock material, and larger gussets have been added around the outside of the knuckle for extra strength. Precision CNC-machined, each set of knuckles and steering arms are inspected and tested for the highest quality of products that Trail-Gear can deliver. These kits include a special 6-hole shim pack for use between the top of the knuckle and the steering arm assembly. A minimum of four additional steering arm studs are required for installation.
( 3 )
$499.99
—
$699.99
Trail-Gear pitman arms are designed from solid forged steel construction, and are ideal for use with crossover steering. Replacing your pitman arm is recommended if the original is worn-out or, in most cases, if your steering box is being changed out. These strong, extra-wide one-piece arms will allow the use of FJ80 tie rod ends. They're available in flat style or with the same drop as the factory pitman arm.
( 1 )
$129.99
Trail-Gear solid axle steering kits support your determination to put together your own SAS kit to lift your first-generation Tacoma. How, you ask? When you have trouble finding the right parts to link your steering to an IFS steering box, you know the answer--Trail-Gear. These TG solid axle kits utilize the same steering parts from their own SAS kits to take the guesswork out of making your own steering linkage. You'll receive an adjustable-length double-D steering shaft, a firewall plate, a steering shaft seal, and U-joints for both ends of the shaft. Trail-Gear is ready to lend a hand with their solid axle steering kits.
Not Yet Reviewed
$379.99
Trail-Gear heavy-duty steering kits solve feedback issues caused through the stock steering setup. Bigger tires and a lifted suspension are necessities for off-roading today—unfortunately, the combination can cause problems. TG kits will reduce steering vibrations, so you can enjoy a more comfortable driving experience. They offer kits for multiple applications that will strengthen your setup for more assurance on the trails. Trail-Gear steering kits include right and left-hand thread heavy-duty FJ80 tie rod ends, drag link, and hardware. The tie rods and drag link are made from hefty 1/4 in. thick wall DOM tubing. Your choice of kit may also include steering stabilizer with 9 in. stroke and hardware, or a hard-to-find 1:10 taper reamer for reaming out your stock pitman arm and steering arms.
Not Yet Reviewed
$299.99
—
$399.99
Truck owners are very impressed by the lineup of Trail-Gear Rock Assault Ram steering assist kits. For example, the Toyota kits feature a selection of various-sized stroke hydraulic rams--with high-temperature inner and outer seals for long life and no leaks. Each ram includes a 3/4 in. rod that's a full 50 percent stronger than other rods on the market. The specially formed 1/4 in. heavy-duty plate steel brackets make installation a snap. Here are the parts included in most Trail-Gear Rock Assault Ram steering assist kits: * Ram with high-temperature inner and outer seals * Rod ends with jam nut * Ram bracket for axle housing * Ram bracket for tie rod * Two hoses * Two JIC 90 degree elbows * Two 1/4 in. NPT x #6 JIC steering box fittings * Mounting hardware * Instructions with photos These kits do require: * Trail-Gear High Steer crossover steering with 1.25 in. tie rod * Tapped steering box
( 3 )
$449.99
Providing improved power steering for off-roading, Trail-Gear power steering pumps replace your stock models with high-performance reliability. Their TC-style pumps are built to handle extreme heat, with each one receiving a bench test to ensure quality. They are available in two styles -with or without an anodized aluminum pulley. When you are on the road, stock is okay--but for off-road, you need trail-tested gear. Order the Trail-Gear power steering pumps best suited for your application.
( 6 )
$399.99
—
$899.99
If you're installing crossover steering, the time you'll save with one of these mounting kits is well worth the investment. They make swapping to the Trail-Gear IFS steering box much easier. The heavy-duty kits feature 3/16 in. inner and 1/4 in. outer frame reinforcing plates, with angled leading and trailing edges to avoid frame cracking. You'll also receive Grade 8 bolts, crimp nuts, and dependable DOM tubing to complete the project.
( 3 )
$89.99
Building a fully hydraulic steering system can be quite a project. Thankfully, Trail-Gear has taken all of the guesswork out of the process with these complete, user-friendly hydraulic steering kits! Everything you will need is included, such as mounting brackets specifically designed for Toyota apps. The steering pump has an all-steel housing and emits 4.5 gpm of flow and 1,650 psi of pressure. Each high-pressure hose is steel-braided with crimped-on ends. These kits are available in 6, 8, and 10 in. ram sizes, and are ideal for use with links and most leaf spring applications. Kits include: * 6, 8, or 10 in. double-ended ram and clevis kit * Orbital (100 ml, 125 ml, or 160 ml) * Full hydraulic steering pump with pulley * Tie rod kit * Double-ended ram mounting kit * Steering column * Orbital mounting kit * Reservoir with filter * Cooler * Power steering belt * Complete hose kit * All necessary hardware
( 4 )
$449.99
—
$2,499.99
Trail-Gear high steer crossover steering kits get you have you crawling over the rocks in no time. Stock steering just can't do the job like flexible crossover steering. TG high steer kits outfit your rig with the unbeatable quality of super beefy, solid forged steering arms, a heavy-duty pitman arm, rod ends, and durable .250 in. wall steering rods. They offer a precision fit for easy assembly and are available with flat arm or drop pitman arm, and 4-stud or 6-stud setups. Is your steering wheel on the right? TG also offers a right hand drive! If you're tired of broken stock steering arms, make the switch to Trail-Gear high steer crossover kits.
( 1 )
$549.99
—
$649.99
Off-roading can be such an adrenaline rush! Unfortunately, it can also take its toll on your vehicle's suspension. No worries, Trail-Gear heavy-duty FJ-80 tie rod ends are available in right-hand threaded and left-hand threaded applications to keep your suspension fine-tuned for trail blazing action. They're greased to ensure the flow of lubrication throughout the part and are sealed to keep out dirt. A cotter pin and jam nut are included. Get the most out of your off-road experience with Trail-Gear suspension parts!
( 4 )
$29.99
Trail-Gear Power Flow steering pump rebuild kits contain all the internal wear components needed to rebuild any TG Power Flow steering pump and get you back on the trail. Racing, rock crawling, and off-road use puts more stress on power steering pumps than those used under normal conditions, and eventually your Power Flow pump may be out of warranty and need to be rebuilt. With Trail-Gear's pump kits and step-by-step instructions, rebuilding is simple. Kit contents: * Pressure plate * Thrust plate * Rotor * Vanes * Ring * Alignment pins
Not Yet Reviewed
$79.99
Trail-Gear Toyota high steer kits feature unbeatable quality at an attractive price. Crossover steering is critical for rock crawling. The stock steering just can't keep pace with today's super-flexible suspension systems. This results in broken stock steering arms and loss of steering. These kits include super-beefy, solid forged steering arms, a heavy-duty pitman arm, heavy-duty 0.250 in. wall steering rods, and rod ends. The kits are precision-fit for easy assembly.
( 3 )
$549.99
—
$749.99
Trail-Gear universal heavy-duty hydro assist ram kits feature a heavy-duty single-ended hydraulic ram in your choice of 6 in. or 8 in. stroke. Trail-Gear's specially designed ram features a 1 1/8 in. rod for maximum strength and a 2 1/4 in. diameter bore for maximum steering force. The provided mounting brackets in kit have fitments made from 1/4 in. thick-formed steel. The specially formed brackets fit most applications to make installation a breeze, however, do take note some applications may require additional cutting and/or grinding. Hardware, JIC hoses, and steering box fittings are included. Trail-Gear recommends a 6 in. stroke for most Toyota applications and a 8 in. stroke for Dana applications. Important Note: Use only standard power steering fluid with this product. The use of ATF fluid, semi-synthetic fluid, or full synthetic fluid not recommended and void the warranty. Additional components required: high steer kit, steering box drilled and tapped for hydro assist.
( 1 )
$449.99
Clearance is the key word for off-road enthusiasts. Navigating rocks and rugged terrain leaves your thin steering mechanism vulnerable to damage--which makes Trail-Gear high steer arms invaluable to your vehicle. These pressure-forged steel brackets provide solid mounting points to raise your pitman arm and steering rods a few more inches off the ground. This additional height can mean the difference between safe adventures … or a bent and useless steering component. Trail-Gear steer arms feature tapered tie rod holes for secure contact between parts, and they compensate for angles so your rod ends can ride at the OE-standard 90 degrees. For trucks, 4Runners, Land Cruisers, and other solid front axle rides, TG high steer arms are essential equipment when you venture off the beaten path.
( 3 )
$299.99
—
$349.99
Trail-Gear tie rod tubes are made from heavy-duty 1.25 in. x .250 in. wall DOM tubing that is precision tapped and powdercoated. Each of these TG rods are test fitted to ensure rod ends thread-in with the correct fit. Trail-Gear tie rod tubes are available in three lengths.
( 1 )
$129.99
Through years of research, development, and testing Trail-Gear has developed these Rock Assault double-ended ram kits—to meet the tough demands of top-level rock crawling competitors and the toughest trails in the world. Most rams on the market only have one rod seal. Trail-Gear started with the primary and secondary rod seal to insure that fluid leakage would never be an issue. They also included two wiper seals in the design to ensure that dirt and debris stays on the trail—and doesn't invade your steering system. In addition, the ram was designed with a triple-lip piston seal for consistent steering with no drift or fluid bypassing the piston. In true Trail-Gear style, the Rock Assault kits are engineered to be the strongest on the market, so they're designed with a piston wear band and a rod bushing. This bushing allows the rod to absorb much higher side loads. The piston shaft is machined from a single piece of 4340 chromoly. Trail-Gear Rock Assault double-ended ram kits are available with a 6, 8, or 10 in. stroke. The cylinder has a black zinc plated finish, while the rod has 3/4-16 in. female threads on each end.
Not Yet Reviewed
$649.99
Trail-Gear tie rod end replacement boots are made to fit Trail-Gear tie rod ends, as well as many other popular tie rod ends. They're manufactured from a special compound of UV-resistant NBR (Naturally Blended Rubber). Trail-Gear tie rod end replacement boots are direct replacements for their hi-steer units and installation is a snap—all that's required is some grease and a pair of snap ring pliers.
( 2 )
$9.99
Reduce steering vibrations at higher speeds with Trail-Gear steering stabilizer kits. These very helpful components can help keep you riding smoothly. One end welds to the passenger side frame rail and the other end bolts onto the drag link. Keep steering vibration to a minimum out on the trails with Trail-Gear steering stabilizer kits.
( 3 )
$99.99
Trail-Gear steering knuckle replacement components are significantly stronger than OEM standards to make the most of your newer replacement steering arms. TG should be your first choice for knuckle hardware when repairing or upgrading your high-steer system.
( 3 )
$1.99
—
$19.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
