Availability
Whether you are hitting the trail, or ripping through the desert, Trail-Gear Performance bump stops will allow you to get the most out of your vehicles suspension by eliminating harsh bottom outs. Offered in 2 in. and 2.5 in. body diameters, the 2.5 in. models will absorb more impact energy and are recommended by Trail Gear for vehicles over 5,000 lbs. or trucks with highly leveraged A-arms or trailing arms. Of course, both sizes are sure to improve your overall off-road experience. Trail-Gear Hydraulic smooth body bump stops are fully rebuildable, easily tunable through the Schrader valve on top, and TG's unique automatic velocity sensitive valving technology saves you time by eliminating the need to adjust shim packs. The bump stops also help prevent damage from occurring to expensive shocks and suspension components by absorbing impacts at full suspension compression. Trail-Gear smooth body, pin top bump stops are available in 2 in., 3 in., and 4 in. travel options, and can be purchased individually or in sets that will also include four 1/4 in. thick ASTM A36 steel weld-on universal mounting brackets. Choose the size, stroke, and quantity desired for your vehicle. Hydraulic bump stop details and benefits: * Zinc-Plated SAE 1020 steel body * Hard chromed SAE 1045 steel rod * 6061 T-6 aluminum seal housing with dual PTFE coated bronze rod guides * Viton® O-ring with U-cup seal * 6061 T-6 aluminum piston * Automatic velocity sensing valve * Anodized 6061 T-6 aluminum end cap with polyurethane wiper seal * Replaceable Delrin® contact pad for smooth and quiet operation * Tunable by adjusting the nitrogen pressure and or oil volume * Schrader valve with machined aluminum cap for quick and easy pressure adjustment * Zinc-plated steel locking nut * Adjustable from 75 to 300 psi; ships pre-charged to 200 psi--a great starting point for tuning your suspension
Not Yet Reviewed
$399.99
Truck owners are very impressed by the lineup of Trail-Gear Rock Assault Ram steering assist kits. For example, the Toyota kits feature a selection of various-sized stroke hydraulic rams--with high-temperature inner and outer seals for long life and no leaks. Each ram includes a 3/4 in. rod that's a full 50 percent stronger than other rods on the market. The specially formed 1/4 in. heavy-duty plate steel brackets make installation a snap. Here are the parts included in most Trail-Gear Rock Assault Ram steering assist kits: * Ram with high-temperature inner and outer seals * Rod ends with jam nut * Ram bracket for axle housing * Ram bracket for tie rod * Two hoses * Two JIC 90 degree elbows * Two 1/4 in. NPT x #6 JIC steering box fittings * Mounting hardware * Instructions with photos These kits do require: * Trail-Gear High Steer crossover steering with 1.25 in. tie rod * Tapped steering box
( 3 )
$449.99
Trail-Gear universal heavy-duty hydro assist ram kits feature a heavy-duty single-ended hydraulic ram in your choice of 6 in. or 8 in. stroke. Trail-Gear's specially designed ram features a 1 1/8 in. rod for maximum strength and a 2 1/4 in. diameter bore for maximum steering force. The provided mounting brackets in kit have fitments made from 1/4 in. thick-formed steel. The specially formed brackets fit most applications to make installation a breeze, however, do take note some applications may require additional cutting and/or grinding. Hardware, JIC hoses, and steering box fittings are included. Trail-Gear recommends a 6 in. stroke for most Toyota applications and a 8 in. stroke for Dana applications. Important Note: Use only standard power steering fluid with this product. The use of ATF fluid, semi-synthetic fluid, or full synthetic fluid not recommended and void the warranty. Additional components required: high steer kit, steering box drilled and tapped for hydro assist.
( 1 )
$449.99
Whether you are hitting the trail, or ripping through the desert, Trail-Gear Performance bump stops will allow you to get the most out of your vehicles suspension by eliminating harsh bottom outs. Offered in 2 in. and 2.5 in. body diameters, the 2.5 in. models will absorb more impact energy and are recommended by Trail Gear for vehicles over 5,000 lbs. or trucks with highly leveraged A-arms or trailing arms. Of course, both sizes are sure to improve your overall off-road experience. Trail-Gear Hydraulic threaded body bump stops have anodized aluminum locking rings for quick and easy adjustment. They are fully rebuildable, easily tunable through the Schrader valve, and TG's unique automatic velocity sensitive valving technology saves you time by eliminating the need to adjust shim packs. The bump stops also help prevent damage from occurring to expensive shocks and suspension components by absorbing impacts at full suspension compression. Trail-Gear threaded body bump stops are available in 2 in., 3 in., and 4 in. travel options, and can be purchased individually or in sets that will also include four 1/4 in. thick ASTM A36 steel weld-on universal mounting brackets and spanner wrench. Choose the size, stroke, and quantity desired for your vehicle. Hydraulic bump stop details and benefits: * Zinc-Plated SAE 1020 steel body * Hard chromed SAE 1045 steel rod * 6061 T-6 aluminum seal housing with dual PTFE coated bronze rod guides * Viton® O-ring with U-cup seal * 6061 T-6 aluminum piston * Automatic velocity sensing valve * Anodized 6061 T-6 aluminum end cap with polyurethane wiper seal * Replaceable Delrin® contact pad for smooth and quiet operation * Tunable by adjusting the nitrogen pressure and or oil volume * Schrader valve with cap for quick and easy pressure adjustment * Adjustable from 75 to 300 psi; ships pre-charged to 200 psi--a great starting point for tuning your suspension
Not Yet Reviewed
$399.99
Trail-Gear solid axle steering kits support your determination to put together your own SAS kit to lift your first-generation Tacoma. How, you ask? When you have trouble finding the right parts to link your steering to an IFS steering box, you know the answer--Trail-Gear. These TG solid axle kits utilize the same steering parts from their own SAS kits to take the guesswork out of making your own steering linkage. You'll receive an adjustable-length double-D steering shaft, a firewall plate, a steering shaft seal, and U-joints for both ends of the shaft. Trail-Gear is ready to lend a hand with their solid axle steering kits.
Not Yet Reviewed
$379.99
Providing improved power steering for off-roading, Trail-Gear power steering pumps replace your stock models with high-performance reliability. Their TC-style pumps are built to handle extreme heat, with each one receiving a bench test to ensure quality. They are available in two styles -with or without an anodized aluminum pulley. When you are on the road, stock is okay--but for off-road, you need trail-tested gear. Order the Trail-Gear power steering pumps best suited for your application.
( 6 )
$359.99
—
$399.99
Building a fully hydraulic steering system can be quite a project. Thankfully, Trail-Gear has taken all of the guesswork out of the process with these complete, user-friendly hydraulic steering kits! Everything you will need is included, such as mounting brackets specifically designed for Toyota apps. The steering pump has an all-steel housing and emits 4.5 gpm of flow and 1,650 psi of pressure. Each high-pressure hose is steel-braided with crimped-on ends. These kits are available in 6, 8, and 10 in. ram sizes, and are ideal for use with links and most leaf spring applications. Kits include: * 6, 8, or 10 in. double-ended ram and clevis kit * Orbital (100 ml, 125 ml, or 160 ml) * Full hydraulic steering pump with pulley * Tie rod kit * Double-ended ram mounting kit * Steering column * Orbital mounting kit * Reservoir with filter * Cooler * Power steering belt * Complete hose kit * All necessary hardware
( 4 )
$449.99
Clearance is the key word for off-road enthusiasts. Navigating rocks and rugged terrain leaves your thin steering mechanism vulnerable to damage--which makes Trail-Gear high steer arms invaluable to your vehicle. These pressure-forged steel brackets provide solid mounting points to raise your pitman arm and steering rods a few more inches off the ground. This additional height can mean the difference between safe adventures … or a bent and useless steering component. Trail-Gear steer arms feature tapered tie rod holes for secure contact between parts, and they compensate for angles so your rod ends can ride at the OE-standard 90 degrees. For trucks, 4Runners, Land Cruisers, and other solid front axle rides, TG high steer arms are essential equipment when you venture off the beaten path.
( 3 )
$299.99
—
$349.99
Trail-Gear keeps your rig rolling over the toughest trails with their Rock Assault double-ended rams. The replacements offer the same strength as those in the kits. The cylinders are black zinc plated, while the 4340 chromoly rod has 3/4 in. x 16 female threads on each end. They are available in 6 in., 8 in., and 10 in. strokes and are designed with a piston wear band and rod bushing.
Not Yet Reviewed
$254.99
—
$299.99
Trail-Gear heavy-duty steering kits solve feedback issues caused through the stock steering setup. Bigger tires and a lifted suspension are necessities for off-roading today—unfortunately, the combination can cause problems. TG kits will reduce steering vibrations, so you can enjoy a more comfortable driving experience. They offer kits for multiple applications that will strengthen your setup for more assurance on the trails. Trail-Gear steering kits include right and left-hand thread heavy-duty FJ80 tie rod ends, drag link, and hardware. The tie rods and drag link are made from hefty 1/4 in. thick wall DOM tubing. Your choice of kit may also include steering stabilizer with 9 in. stroke and hardware, or a hard-to-find 1:10 taper reamer for reaming out your stock pitman arm and steering arms.
Not Yet Reviewed
$299.99
—
$339.99
Stack your Samurai's suspension with the advantages of these Trail-Gear Samurai leaf springs. They come in front and rear pairs, and can give your vehicle up to a 3 in. lift from the stock height. These quality springs are built to handle tough conditions, with a full military wrap on the fixed end. Built strong and designed to last long, they will handle all types of suspension stress and vibration. Their military wrap acts like a secondary main leaf, ensuring that you can keep going, even if one leaf fails. You can ride confidently and securely in your Samurai with these Trail-Gear leaf springs.
( 2 )
$299.99
Trail-Gear Rock Assault 9 steering arms are CNC-machined from 1018 billet steel, and are 1 1/4 in. thick with a keyway design for added engagement. Plus, they come with a 3/4 in. hole and room for additional holes to get the perfect steering setup! Rock Assault 9 steering arms feature an angled design that moves the tie rod mounting holes closer to the center of the vehicle, allowing wheels with a higher backspacing to be used. Match up your Rock Assault 9 knuckles with these Trail-Gear steering arms--and get ready to scale boulders!
Not Yet Reviewed
$399.99
Trail-Gear leaf spring shackle and hanger kits make it easy to install shackle tubes in your frame. Kit includes frame tubes, tube jigs, offset hanger with gussets, and offset shackles. Trail Gear specializes in suspension and off-road products.
( 5 )
$279.99
After years of development and testing, Trail-Gear fully loaded Six Shooter kits have set a new standard for Toyota knuckle strength and reliability. They totally eliminate the problem of broken steering knuckles and studs. The addition of two studs in each arm effectively prevents the steering arm from becoming loose or shearing off the studs under extreme loads. The knuckle housing was designed with thicker-than-stock material, and larger gussets have been added around the outside of the knuckle for extra strength. Precision CNC-machined, each set of knuckles and steering arms are inspected and tested for the highest quality of products that Trail-Gear can deliver. These kits include a special 6-hole shim pack for use between the top of the knuckle and the steering arm assembly. A minimum of four additional steering arm studs are required for installation.
( 3 )
$419.99
Specifically designed for Toyota Tacoma trucks, the Trail-Gear Rock Defense dual T-case crossmembers provide a sturdy secure transfer case mount, while also providing superior transfer case protection while sliding across any rocks your vehicle can tackle. The Rock Defense T-case crossmembers are made from 3/8 in. thick 1010 steel, so you have confidence that your transfer case is supported and covered when you are sliding over even the nastiest rocks. These crossmember kits can be mounted either by drilling the frame and bolting the crossmember in, or simply by welding the crossmember mounting brackets to the frame and bolting the crossmember to the mounting brackets. Trail-Gear also offers single transfer case crossmember kits. Both dual case and single case crossmembers use the same mounting brackets, so that once you have your single case brackets installed, there is no need to change them when upgrading to dual cases. You simply bolt dual case crossmember into the same bracket, all that is needed is an additional T-case mount. Features and benefits: * Fits 1995-2004 Tacoma T-cases, automatic and manual transmissions, and uses your stock T-case mount(s) * Rock Defense T-case crossmember kits can be mounted either by drilling the frame and bolting the crossmember in, or simply by welding the crossmember mounting brackets to the frame and bolting the crossmember to the mounting brackets * Supplied mounting brackets are 1/4 in. thick 1010 steel and all necessary Grade 8 mounting hardware is included with top locking nuts * Both single and dual case crossmembers use the same mounting brackets, so that once you have your single case brackets installed, there is no need to change them when you upgrade to dual cases—simply bolt the dual case crossmember into the same bracket, all that is needed is an additional T-case mount (sold separately) * Crossmembers are shipped unpainted and should be painted or powdercoated before being installed
Not Yet Reviewed
$399.99
Trail-Gear is the originator of forged high steer arms for Toyota Pickups and 4Runners. Each arm is pressure forged from 8620 tool steel, making them incredibly strong. All mounting surfaces are machined, including the split washer surface and the tie rod tapered holes—ensuring correct and positive contact between parts, preventing knuckle studs and tie rod ends from coming loose. Arms are angle compensated so that the rod ends ride at the factory designed 90 degree angle. * TGI-130619-KIT fits 1979-85 Toyota Pickup and 4Runner. Also fits 1979 and later Land Cruisers with a mini truck conversion * Knuckle and steering arms sold separately
Not Yet Reviewed
$349.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
