Availability
TeraFlex JK Wrangler Rzeppa high-angle factory replacement CV joints replace your worn or damaged factory units without needing to purchase expensive aftermarket U-joint upgrades. These high-angle models reduce boot failure common with 3 in. or higher lifts. TeraFlex includes low-friction grease engineered specifically for the high-rpm needs of the Rzeppa CV joint and features high-viscosity surface bonding characteristics necessary to properly adhere the grease to all moving surfaces. TeraFlex Rzeppa high-angle CV joint kits include: * CV joint assembly * High-angle CV housing cap and boot * Bolt flanges * Socket head bolts * 6mm Allen wrench * Low-friction CV grease
( 15 )
$185.66
TeraFlex Tera44 HD axle housings include front inner axle shafts and TeraFlex HD ball joints, with or without an ARB air locker and a choice of pre-installed ring and pinion gears. They are the perfect replacements for some Jeeps and the ideal upgrade for others. Transfer your existing outer components (stub shafts, unit bearings, knuckle assembly, brakes, sensors) to the new housing to beef up your Jeep with TearFlex Tera44 HD front axle assemblies. Features: * 3.25 in. x 0.5 in. axle tube * UV-protected triple-stage powdercoat for corrosion resistance * 1/4 in. thick CNC laser-cut axle brackets for extreme strength * HD forged inner knuckles * 5 x 5 in. wheel bolt pattern * Eliminates center axle disconnect * 1-Year/Unlimited Mileage Warranty
Not Yet Reviewed
$5,082.99
TeraFlex Tera30 HD front axle housings are heavy-duty with axle tubes, bracketry, and forged inner knuckles, as well as pre-installed inner seals and upper control arm bushings. They are available with or without an ARB air locker, pre-installed ring and pinion gears, and TeraFlex HD ball joints. With the bare HD axle housings, simply transfer your existing internal and outer components to the new housing! Select a kit designed for your Jeep. TeraFlex Tera30 HD front axle: * 3.25 in. O.D. x 0.25 in. wall axle tube increases torsional strength to resist bending * Asymmetric housing design for extra-long tube side strength * Pre-installed inner axle seals * HD forged inner knuckles with greater upper and lower section strength * Ductile cast iron housing with increased rib gussets * HD ductile iron differential cover * Smooth radius bottom design to glide over rocks and obstacles * Integrated lower control arm skid plates * High-flow oil passages and bottom oil drain hole for simple fluid changes * UV protected triple-stage powdercoat for corrosion resistance * 1/4 in. thick CNC laser-cut axle brackets for extreme strength * Integrated factory location upper control arm mount * Pre-installed upper control arm bushings * Proper pinion angle for lifted applications * Pre-tapped or drilled hole on spring perch for bump stop extensions * Retains all factory ESP, ABS, and speedometer sensor capability
Not Yet Reviewed
$2,883.99
TeraFlex adjustable transfer case torque shaft rods provide the added length you need. Pair these rods with TeraFlex shift linkage adapter kits when a longer torque shaft is required to mount between the linkage adapter kit and transfer case lever. The rods are available for a wide range of Jeep submodel applications.
( 1 )
$47.99
TeraFlex NP231 short shaft kits, or slip yoke eliminators, with new heavy-duty shafts, are engineered to withstand the 50 percent increase in torque generated by the extreme reduction of the Tera Low231 gears. These kits also eliminate the need to lower the transfer case in most cases by increasing the rear driveshaft length by 4 in. They include a larger output bearing and rear housing.
( 1 )
$324.37
Jeep Wrangler JK's are extremely popular for off-road use and strongly built in stock form. Anytime you're running 35 in. or larger tires you need TeraFlex axle sleeve and upper knuckle gusset kits. These kits include DOM sleeves to strengthen the axle tubes, and upper C- knuckle gussets to alleviate a weakness issue. These kits are designed to alleviate the extra stresses larger tires cause on your jeep. The axle-sleeves are made of DOM tubing and will reduce the likelihood of bending or breaking your housing. The upper gussets are 1/2 in. thick steel for extreme strength, while allowing plenty of surface area for welding. Breaking an axle is tough, breaking the entire housing or C's may leave you stranded. Give your JK the trail rating you deserve with TeraFlex axle sleeve and upper knuckle gusset kits.
Not Yet Reviewed
$180.99
TeraFlex differential covers are designed to offer extreme protection from rocks, obstacles, and other debris on the trail. These covers are available in a choice of materials and are over 3/8 in. thick to ensure ultimate protection.
( 3 )
$115.99
—
$136.49
TeraFlex axle sleeve kits are designed to reinforce the weak axle tubing on Jeep Dana 30 or 44 factory axles. These steel braces prevent unwanted bending or breaking under extreme conditions. TeraFlex axle sleeve kits include: * Short side inner axle sleeve * Long side inner axle sleeve
Not Yet Reviewed
$123.99
TeraFlex 2WD low-range kits let you gear down to power up. The 2Low kits are great little mods that allow low-range 2WD--imagine being able to steer in low range! You will have all of the benefits of true low-range gearing, while allowing the front to turn freely. They eliminate drivetrain bind and most of your 3-point turns. These kits are completely internal and do not require any external modifications. Make good use of your engine power with TeraFlex 2WD low range kits.
( 3 )
$115.99
TeraFlex CRD60 HD axle assemblies are perfect for replacing bent, broken, or damaged axles in Jeep vehicles, including Rubicon models. They can also be used as direct bolt-on upgrades for Jeep owners looking to beef up their stock axles' weak areas. Tera's exclusive Constant Radius Design (CRD) provides high ground clearance that is unaffected by pinion angle adjustments, and is compatible with all super 60 gear ratios for extreme-duty applications requiring additional ring and pinion strength. These heavy-duty axle assemblies are offered with different gear ratio options, carriers, and will accommodate 0 to 6 in. of lift. TeraFlex full-float CRD60 HD axle assemblies feature smooth profile surfaces, axle tubes, all necessary mount brackets, control arm bushings, and more!
Not Yet Reviewed
$8,796.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
