Availability
Techflex Shrinkflex 3:1 polyolefin heat shrink tubing is an effective and economical way to professionally finish the ends of almost any wire harness. The over-expanded configuration easily fits over the end of a connector, and shrinks down to one-third of its original diameter to fit snugly over the wires. Shrinkflex is the ideal way to create a tight, professional finish on any wire, hose, or cable management project. With Techflex's wide assortment of bright colors, you can attractively color coordinate the ends of their expandable braided sleeving. The tubing is also available in a variety of lengths and diameters. Techflex 3:1 polyolefin heat-shrink tubing also features: * Shrink temperature: 194°F * Flame-retardant * Versatile and economical termination solution * Broad selection of sizes and colors * Resists common automotive chemicals * Meets Mil-I-23053/5
( 13 )
$5.99
—
$12.99
By adjusting the physical characteristics of the polyethylene terephthalate (PET) filaments, the engineers at Techflex have produced Techflex Clean Cut sleeving. It has the same specifications as their other PET sleeving … with a unique advantage. Clean Cut can be cut with ordinary scissors and still maintain an extraordinarily fray-resistant end without the addition of chemical binders or adhesives. Braided for maximum coverage while still allowing enough expansion for easy installation over plugs and connectors, Flexo Clean Cut is ideal for field installers and other situations where access to a hot knife is impossible. Its fray-resistant properties allow frequent expansion of the cut end without unraveling. When cut with a hot knife, Clean Cut produces a clean, smooth, and virtually fray-free end. Additional features of Techflex Clean Cut sleeving include: * Increased braid density for better coverage * High abrasion resistance * Temperature range of -94 degrees F to 257 degrees F * Melt temperature: 482 degrees F
( 5 )
$8.99
—
$9.99
Trying to find all of the pieces to make up Deutsch DT Series stamped and formed connectors can be very time consuming. Techflex has put together kits of some of the most popular male-female configurations. These kits are available in 2-pin through 12-pin complete matched sets with everything you need to assemble your connector kits. Techflex Deutsch DT Series stamped and formed connector kits include: * Plug connector body * Receptacle body * Receptacle Wedgelock * Plug Wedgelock * Pin/male contacts * Socket/female contacts Specifications: * Wire range: 20-14 AWG (varies by kit) * Cavities: two to 12 * Sealed: yes * Contact plating: nickel * Contact style: stamped and formed
( 9 )
$6.99
—
$8.99
High-temperature Techflex stainless steel cable ties are great for harsh environments. These top-quality zip ties are perfect for securely installing heavy-duty and high-temperature sleeving products. Available in 100 lb. and 250 lb. strengths; install with stainless steel cable tie tool.
( 4 )
$4.99
—
$5.99
Techflex Insultherm Tru-Fit sleeving is a braided fiberglass (FGL) sleeving that has been heat-treated and impregnated with an acrylic binder to reduce fraying and dusting, and improve usability and performance. FGL is engineered for applications where temperatures as high as 1,200 degrees F may be encountered. Tru-Fit is used as primary insulation on low-voltage applications such as leads in toasters, coffee makers, ranges, and other appliances. FGL may also be used as insulation and protection for small heaters and resistors that operate at high temperatures, and to insulate over soldered connections when exposure to solder melt temperatures is possible. Techflex Insultherm Tru-Fit sleeving provides a sturdy, long-lasting and inexpensive insulation solution. It is flexible and expandable, and can easily be installed over applications with irregular shapes and tight turns.
( 6 )
$8.99
—
$13.99
Techflex ThermaShield Convoluted sleeving creates a thermal buffer between wires, hoses, and cables and the high-temperature environments surrounding them. ThermaShield is engineered by laminating an aluminized metallic heat shield to a layer of strong, tightly braided fiberglass insulation. This system provides superior protection from radiant heat by reflecting it away from sensitive electronics, wiring, and hoses. Techflex ThermaShield Convoluted cuts easily with scissors and endures temperatures up to 1,200 degrees F without delaminating or turning brittle. Resistant to gasoline and engine chemicals, it is ideal for any situation where protection from radiant heat is a primary concern.
( 7 )
$5.99
—
$11.99
General purpose Techflex Flexo PET sleeving is designed for use in electronics, automotive, marine, and industrial applications where cost efficiency and durability are critical. The unique braided construction and wide expandability allow quick and easy installation over large connectors and long runs. Techflex Flexo PET sleeving is braided from 10 mil polyethylene terephthalate (PET) monofilament yarns. The material has a wide operating temperature range, is resistant to chemical degradation, UV radiation, and abrasion. It cuts easily and cleanly with a hot knife and once installed, will beautify and protect wires, hoses, or cables. The wide range of available colors and sizes allows easy and systematic color coding in complex wiring schemes. Additional Techflex Flexo PET sleeving features and benefits: * Economical and easy to install * Cut and abrasion resistant * Expands up to 150 percent * Halogen-free * Resists gasoline, engine chemicals, and cleaning solvents * FMVSS 302 approved
( 4 )
$6.99
—
$10.99
Techflex Insultherm header wrap is extremely high-temperature resistant (up to 1,200 degrees F) and is commonly used to contain and manage hot gases in automotive and high performance headers and exhausts. Insultherm header wrap is manufactured from texturized fiberglass yarns that are woven into a strong and flexible wrap with vermiculite coating. Remember, when installing Insultherm exhaust wrap, overlapping 1/4 in. is perfect as this allows just enough heat out to ensure performance without damaging your exhaust.
( 17 )
$13.99
Techflex ThermaShield adhesive mats create a thermal buffer between wires, hoses, and cables and the high-temperature environments surrounding them. They are engineered by laminating a reflective aluminized metallic heat shield to a layer of strong, tightly braided fiberglass insulation. This system provides superior protection from radiant heat by reflecting it away from sensitive electronics, wiring, and hoses. With their very aggressive, high-temperature adhesive, Techflex ThermaShield adhesive mats endure temperatures up to 1,200 degrees F without delaminating, turning brittle, or suffering adhesive failure. They resist gasoline and engine chemicals, cut easily with scissors, and are ideal wherever protection from radiant heat is a primary concern.
( 2 )
$7.99
Silicone-jacketed fiberglass Techflex FireFlex sleeving is the choice of professionals in racing and other industries where protection from constant temperatures approaching 500 degrees F is mandatory. FireFlex sleeving is engineered to protect hoses, cables, and wire harnesses from damage due to exposure to extreme heat, open flame, molten splash, and welding sparks. The thick, high-temperature fiberglass sleeve is jacketed with a non-permeable, heavy silicone coating that is flexible enough to follow tight radius curves. FireFlex resists all automotive chemicals and solvents, and provides a substantial level of abrasion and puncture protection. Techflex FireFlex sleeving is completely non-conductive, will not melt, delaminate, become brittle, or support combustion under normal conditions. It provides a professional level solution to thermal protection needs in any application.
( 3 )
$9.99
—
$13.99
With Techflex split tubing installers you can add and remove wires quickly and easily. Simply gather the wires you want into one of these premium installation tools, then insert the tool and wires into any split tubing or semi-rigid sleeving like Flexo F6. Run the tool through the tubing, smooth it out with your hand and you're finished. As the tool travels along the sleeving, it deposits the wires and allows the split to close correctly.
( 7 )
$3.99
—
$6.99
Techflex knows that you are not always going to know what material you are going to need for your next project. Nothing can be more frustrating than to be in the middle of a job and find that the shrink tubing you have is not the right size. To help solve this aggravating problem, Techflex created their multi-size Shrinkflex kits. Most kits have six different diameters to work with and provide a perfect selection. They are a great addition to your shop. Don't be stuck again with the wrong shrink tubing, Techflex has you covered.
Not Yet Reviewed
$4.99
—
$6.99
Clearance
For decades, Techflex's Insultherm sleeving has been the first choice among automotive professionals and enthusiasts alike for many of their thermal protection applications. Innovative Techflex Insultherm spark plug boot insulators offer the same high-temperature protection that extends the life of expensive spark plug wires by protecting them where they need it most … at the boot. Just slip these insulators over any spark plug cable and boot (even right angle boots). Once installed, they require no clearance from hot surfaces, and can even rest directly on hot exhaust headers without affecting performance. Techflex Insultherm spark plug boot insulators are completely non-conductive and will not support combustion. They provide an easy, economical solution to the challenge of wire protection in cramped, high-temperature, high performance engine compartments. Other features of Techflex Insultherm spark plug boot insulators: * Braided fiberglass construction * Protects up to 1,200 degrees F * 3/4 in. diameter double-thickness (triple-thick at the sewn end) * Halogen-free * Resists gasoline and engine chemicals
( 13 )
$22.79
$9.50
Techflex F6 Woven Wrap sleeving has been engineered from the ground up to meet the demanding specifications of today's modern wiring harness industry. F6-WW utilizes many of the same characteristics as Techflex's original F6 split-braided sleeving; including the easy wrap around design and the extra overlap to enclose important wires in electronic communication and power systems. Available in a wide range of sizes and choice of colors, the woven construction provides superior elastic flexibility with unbeatable coverage over any harness assembly. Wire harness professionals also appreciate the increased abrasion resistance Techflex F6 Woven Wrap sleeving provides to their cable assemblies.
( 9 )
$16.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
