Availability
On Sale
These TCI Breakaway torque converters will give you about 1,000 more rpm stall speed than stock, so you'll launch and accelerate faster. TCI remanufactures them to last with furnace-brazed fins, needle bearings, and a flame-hardened hub--the same qualities that they gave their street/strip converter.
( 107 )
$713.95
$525.95
—
$663.95
Maximize your transmission's power potential! TCI sprag and drum assemblies are designed to reduce rotating mass without compromising drum integrity. They will hold up to five clutches and are hard coated for improved wear characteristics.
( 6 )
$517.95
—
$548.95
On Sale
These TCI StreetFighter converters are completely remanufactured with furnace-brazed fins, needle bearings, and a flame-hardened hub. StreetFighter converters will give you about a 3,000 to 3,500 rpm stall speed. They're recommended for use on high-compression street/strip engines and higher performance cars and are used on some of the fastest street machines the world over. Plus, some applications are available with an anti-ballooning plate for use on vehicles equipped with nitrous oxide.
( 59 )
$817.95
$574.95
—
$820.95
TCI trans-brake kits allow you to achieve maximum torque converter stall for quicker and more consistent reaction and 60 ft. times. They work like this: When the trans-brake is engaged, the vehicle can roll neither forward nor backward, and as you press on the accelerator, the engine can rev as high as the torque converter stall. Once the brake is released, power is immediately transferred to the rear tires, with less parts breakage than with a manual transmission.
( 21 )
$559.95
—
$854.95
No matter which automatic transmission your street rod or race car has, TCI Diablo shifters have you covered. Using TCI patent pending Diablo technology, the shifters have a fully configurable design that allows the user to set them up to utilize either a front or rear exit cable—and configure them for 2-, 3-, 4-, or even 6-speed transmissions in both forward and reverse shift patterns. There is no longer a need to buy and replace parts if you are changing shift order/configuration, or changing transmissions entirely. The TCI Diablo shifters are also available with an optional 2-button die-cast aluminum handle for controlling nitrous, transbrake, or shift points.
( 17 )
$521.95
—
$597.95
On Sale
TCI Maximizer high-torque towing converters are efficient units that put more of your engine's torque to the ground. Slippage is minimized, providing better gas mileage and as much as a 20-degree F reduction in transmission temperature. Another benefit is reduced engine rpm at highway speed. These torque converters are available in a variety of size options for more than a dozen Chevy, Ford, and Mopar transmission models.
( 20 )
$855.95
$505.95
—
$805.95
TCI Outlaw shifters not only ensure that you will find the right gear when you need it, but also deliver great looks. Constructed of billet aluminum with a pistol grip shifter, they are rugged enough to handle both street and race duty, while complementing the interior of any vehicle. They feature rugged construction and are perfectly suited for competition use, being compliant with NHRA/IHRA-legal reverse lockout regulations. In addition, Outlaw shifters feature a park/neutral safety switch, along with provisions for a reverse light system. A shifter cable and installation hardware are included.
( 88 )
$511.95
On Sale
These TCI Super StreetFighter converters are completely remanufactured with furnace-brazed fins, needle bearings, and a flame-hardened hub. Super StreetFighters provide the ultimate street performance with a stall speed of up to 4,000 rpm and competition-style launches. They're recommended for use on high-compression street/strip engines and higher performance cars and are used on some of the fastest street machines the world over. Plus, some applications are available with an anti-ballooning plate for use on vehicles equipped with nitrous oxide.
( 14 )
$692.95
$642.95
—
$811.95
On Sale
These Saturday Night Specials set the standard for street performance torque converters--without the high costs. Utilizing many of the same features as more expensive torque converters, the Saturday Night Specials are fully furnace-brazed, have a new hardened pump hub, and are pressure-tested and balanced prior to shipment.
( 46 )
$746.95
$505.95
—
$696.95
On Sale
These Maximizer Street Performance torque converters are built with extra reinforcement and thicker mounting surfaces to withstand the additional load and vibration put through the drivetrain by a truck with performance modifications. By providing additional stall, your truck will see better initial takeoff and will not lug the engine when using big tires. Special attention is made to match the converters to the power range of most trucks that do double duty as off-road and daily drivers. Improved rear-wheel horsepower and elapsed times are some of the results.
( 7 )
$786.95
$592.95
—
$736.95
TCI StreetFighter shifters are designed to provide ultra-reliable, ratchet-action shifting that commands your transmission and is compatible with both forward and reverse pattern valve bodies. They are are very affordable and feature an NHRA/IHRA-approved reverse lockout system, a lighted OEM-style gearshift indicator, and a shifter cover which can be custom-fitted to your transmission tunnel for a professional final appearance.
( 20 )
$759.95
The TCI 4L60 Off-Road torque converters are the first in a new series featuring a low stall speed between 1,800 to 2,400 rpm to prevent "pushing through" the brakes when off-road, at low speed, or in stopped conditions. The 4L60 torque converters are perfect for mild LS-swapped Jeeps or off-road rigs. The extra robust 10-inch converter benefits from a heat-treated steel pump hub and sprag races for increased strength and durability for trail abuse. The double-captured thrust bearings increase capacity while also reducing drag, which is critical for off-road use. 4L60 Torque Converter features: * Designed for use with mild LS swapped Jeeps or off-road applications * Heat-treated steel pump hub * Heat-treated sprag races for increased strength and durability for off-road abuse * Double captured roller thrust beatings for increased capacity and reduced drag, critical for off-road use * Furnace-brazed * Balanced * Mounting hardware included Note: Actual stall speed may differ due to engine combination, gear selection, and vehicle weight.
Not Yet Reviewed
$518.95
For serious performance, TCI machined SFI-approved flexplates are a "must have". These .140 in. thick flexplates are constructed of A514 Blanchard ground steel and are SFI 29.1 approved. TCI offers a complete line of Chrysler and Ford flexplates with GM and Ford bolt patterns for use with their adapter plate kits as well as neutral balanced flexplates with 168-tooth and 166-tooth starter rings for Chevy and Pontiac applications. Now you can speed down the track with the confidence of TCI machined SFI-approved flexplates.
( 58 )
$519.95
Whether you need stock, stamped, or heavy-duty, TCI forged flexplates are your performance solution. TCI offers popular Chrysler, Ford, and Chevy applications. Their forged selection for Chrysler includes special counterbalanced flexplates for neutral balance torque converters in cast crank applications that came with a counterbalanced torque converter. For Ford applications, TCI offers OEM-style small block plates built to precise standards with extra-thick welds to retain starter ring gear, and they are precision-balanced. Their Chevy stamped flexplates are built thicker than stock from high-tensile strength materials with extra welding to help retain the starter ring gear, and to withstand the stress of high-rpm engines and high-stall converters. For high performance, buzzing around at high rpm requires the confidence of TCI forged flexplates.
( 268 )
$531.95
—
$586.95
Are you tired of breaking your transmission's input shaft on hard launches at the track? Cure those problems for good with one of these high-strength input shafts from TCI. Made from Vaccu Melt 300 or VASCO 300 steel for maximum durability, these input shafts reduce unwanted breakage and will keep you in the hunt for a win.
Not Yet Reviewed
$788.95
TCI speedometer control units are the perfect solution to retrofitting an electronic transmission. These economical adapters pigtail into the electronic speedometer harness and have a connection to power a cable-driven speedometer. They are fully configurable for any tire size and rear gear ratio. Cables made to fit specific transmissions are sold separately.
( 1 )
$587.95
—
$597.95
TCI automatic transmission front pump assemblies are a direct bolt-in replacement for the stock piece, and they ensure proper fluid circulation and consistent line pressure in many performance applications. These easy-to-install units are precision machined, inspected, and tested for quality. TCI front pumps are available for a variety of transmission types. Choose the model that's designed for fitment on your vehicle.
( 8 )
$556.95
—
$587.95
TCI Outlaw-X shifters are compact--2.1 in. wide by 9.6 in. long--and feature a powdercoated cover with quick-release pins and a pistol-grip handle. They include Park/Neutral safety switches and provisions for a reverse-light system, as well as patent-pending gate plate technology to comply with NHRA/IHRA reverse lock-out regulations. TCI Outlaw-X shifters come with a cable and all hardware needed for installation.
( 3 )
$500.95
All piston engines produce crankshaft torsional vibration. TCI Rattler torsional vibration absorbers counteract those vibrations by using internal rollers that automatically offset the twisting forces and eliminate the root cause of torsional vibration. They are effective for the entire RPM range and extend crankshaft and bearing life while also increasing valvetrain stability. Their design does not utilize viscous fluids and they are lighter than most dampers of the same size and material construction. Rattler vibration absorbers feature steel rollers that fit loosely into a specific number of holes. By using an exact, patented, mathematical relationship, the rollers roll forward during the compression stroke and backward during the power stroke to keep engine speed variation and vibration to a minimum. The rollers are actually centrifugal pendulums that store and release energy back into the crankshaft rather than converting it to heat energy as dampers do. They are not frequency specific, but are based on the number of cylinders or the events per revolution so they are practical for street use, as well as track and drag strip use. Features include: * Standard bolt patterns * Available for internally and externally balanced engines * Etched integral timing marks can't move relative to the crankshaft * Maintains maximum effectiveness at all engine speeds * Virtually no maintenance required * No fluids, elastomers, or friction materials * No pulley or crank trigger shims required * CNC-machined to exact tolerances * SFI 18.1 certified
( 3 )
$517.99
—
$574.95
On Sale
TCI Competition torque converters are proven race winners and an excellent choice for stock and Super Stock cars. They work well with both big and small blocks, producing power between 4,500 and 7,000 rpm. You'll maintain engine rpm between shifts with their efficient design, and gain improved reliability with an oversize caged bearing supporting a new stator. ETs are more consistent and reaction times faster as a result of a stronger housing, which resists flexing and ballooning.
( 9 )
$786.95
$713.95
—
$817.95
TCI transmission crossmembers are available for a range of classic vehicles. They feature all-steel construction for maximum strength and durability with less weight than factory parts. Designed with the do-it-yourselfer in mind, TCI crossmembers offer an innovative 3-axis modular design that is adjustable for optimal fitment across a range of applications. Most models also use the original bolt holes, so crossmember installation has never been easier. A powdercoated finish resists scratches and rust and provides a clean, finished look.
Not Yet Reviewed
$538.95
TCI GM Transmission to Chrysler/Ford Engine Adapter Kits are constructed from 1/4" or 1/2" 6061-T6 aluminum and measure 18 in. tall x 24 in. wide. They may be trimmed for chassis clearance or used as a mid-mount plate. These kits are designed to retain the stock starter location.
( 1 )
$505.95
—
$771.95
These TCI transmission Master Racing overhaul kits are designed for racers who maintain their own transmissions. They contain parts that are required when freshening up an existing competition transmission. You'll receive the high performance filter, clutches, steels, seals, gaskets, and bushings normally replaced during a rebuild. In addition, kits for late model GM overdrive transmissions also include a new performance band.
( 58 )
$573.95
—
$629.95
On Sale
Designed especially for classes where a functional torque converter is required, these Circle Track converters are built to maximize efficiency and reduce slippage. These converters can reduce lap times by over a tenth of a second when compared to a stock converter. Other benefits include a rotating weight reduction of several pounds (all removed from the outside diameter, and thus improving engine braking in corners) and reduced transmission operating temperatures.
( 4 )
$610.95
—
$616.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
