Availability
Whether you need stock, stamped, or heavy-duty, TCI forged flexplates are your performance solution. TCI offers popular Chrysler, Ford, and Chevy applications. Their forged selection for Chrysler includes special counterbalanced flexplates for neutral balance torque converters in cast crank applications that came with a counterbalanced torque converter. For Ford applications, TCI offers OEM-style small block plates built to precise standards with extra-thick welds to retain starter ring gear, and they are precision-balanced. Their Chevy stamped flexplates are built thicker than stock from high-tensile strength materials with extra welding to help retain the starter ring gear, and to withstand the stress of high-rpm engines and high-stall converters. For high performance, buzzing around at high rpm requires the confidence of TCI forged flexplates.
( 268 )
$129.95
—
$228.95
Installation of these TCI 2004R/700R4 lockup wiring kits makes retrofits into non-ECM 700R4 or 2004R vehicles a snap. They allow automatic operation of the TCC in 4th gear under stable engine operation, and disengage the clutch when accelerating or downshifting. A manual override option is also provided. These TCI torque converter lockup wiring kits are constructed from OEM connectors and oil-resistant wire.
( 60 )
$159.95
TCI remote TPS are designed to be installed on your carburetor in the same fashion as a GM transmission throttle valve cable. TCI also carries two different brackets to help you install your remote TPS if you haven't already acquired one.
( 22 )
$244.95
These TCI Performance heavy-duty trans-brake solenoids are engineered with features like a precision-ground steel shaft with a bronze bushing, a shaft-pinned nut for secure placement, and a unique lip seal to prevent fluid leakage while minimizing mechanical drag. Their high-efficiency, precision-wound coil maximizes the amount of copper in the allowable space for maximum force, and their 2-wire setup ensures that a good, quality ground can be established. When you want consistency, TCI has you covered.
( 27 )
$167.95
—
$182.95
These TCI transmission Master Racing overhaul kits are designed for racers who maintain their own transmissions. They contain parts that are required when freshening up an existing competition transmission. You'll receive the high performance filter, clutches, steels, seals, gaskets, and bushings normally replaced during a rebuild. In addition, kits for late model GM overdrive transmissions also include a new performance band.
( 58 )
$197.95
—
$270.95
TCI Max Shift Racing Transmission Fluid (RTF) has been tested and proven to run up to 30 degrees F cooler, even during extreme-heat racing sessions and repeated usage. TCI RTF is uniquely formulated using a new oil-soluble molybdenum additive that greatly reduces internal friction and heat, yet it does not affect clutch and band lockup. It's made using base oils with extremely high viscosity indexes and it contains a special de-foamer agent that reduces fluid foaming, even at 10,000 rpm. In addition, TCI Max Shift RTF contains extreme pressure additives to help control gear fatigue and fracture, actually forming a fluid cushion to help prevent metal-to-metal contact.
( 84 )
$118.95
Investing in TCI transmission pans ensures the longevity of your transmission. They offer a selection of designs, depths, materials, and finishes to keep your transmission cooler and your undercarriage looking good. Skip the pans of lesser quality doomed to warp and leak; choose the policy of lasting performance from TCI transmission pans. TCI cast aluminum pans feature: * Exterior cooling fins wick away and dissipate heat * Provides additional strength and rigidity to transmission case * Ensures long transmission service-life * Include all required accessories and hardware necessary for installation TCI Max-Cool aluminum pans feature: * Black powdercoated finish * Large fluid capacity reduces internal transmission temperature * Exterior cooling fins wick away and dissipate heat * Aircraft-quality aluminum construction for strength and durability * Magnetic drain plug TCI polished die-cast aluminum pans feature: * Thicker than stock pans * Finned and polished to a high luster * Stock depth to avoid ground clearance issues * Includes drain plug for simpler fluid and filter changes * Includes necessary gaskets, filters, and installation hardware TCI chrome-plated steel pans feature: * Stock depth is easy to install * Includes drain plugs * Thicker than stock for added durability * Chrome prevents rust and adds show quality looks
( 183 )
$164.95
—
$280.95
Get maximum performance and quicker ETs with these TCI full manual valve bodies. They're engineered to allow full manual control of the valve body, for quicker shift timing and higher line pressures. You get less clutch slippage under high load, so that more power gets to the ground. They're a great choice for bracket cars, monster trucks, and virtually any off-road competition vehicle where a transbrake is either illegal or undesirable.
( 59 )
$221.95
These TCI FAST-GATE automatic shifters have been specially designed to fit most 3 or 4-speed automatic transmissions. They feature study construction capable of withstanding the demands of racing, and yet look classy enough for most street applications. The shifters have stamped components to ensure smooth, accurate movements when shifting, and the reverse lockout mechanism eliminates the chance of transmission damage from accidentally shifting into reverse. The TCI FAST-GATE automatic shifters include a stylish and durable injection-molded cover, a shifter cable, and all mounting hardware for a simple installation. All FAST-GATE shifters are compliant with current NHRA and IHRA safety regulations.
( 58 )
$205.95
—
$257.95
TCI Automotive TV cable corrector kits are the simplest way to ensure correct throttle valve cable adjustment. These easy-to-use cable kits feature durable steel construction and include parts needed for installation with popular 700R4 or 2004R transmissions. No modifications are needed, so the self-adjusting cable can be hooked up without removing the transmission. Kits are available for applications using either Holley or Edelbrock carburetors. Ensure exact shift points and the life span of your transmission with a properly adjusted throttle valve cable and TCI Automotive TV cable corrector kits.
( 61 )
$122.95
TCI speedometer gear housings are designed to replace the OEM gear housing in your automatic transmission. They install easily into the removable section of the rear tailhousing of the transmission. The TCI speedometer gear housings are available in different tooth combinations and are identified by their color. Upgrading to larger diameter tires? Changing ring and pinion gear ratios? Make sure you use one of these TCI speedometer gear housings to keep track of your speed accurately.
( 167 )
$114.95
TCI Automotive now offers a new 6 in. tailhousing to replace hard-to-find OEM parts for the PRO-X TH350 transmissions. These cast aluminum tailhousings feature a low-profile, lightweight design with improved strength for drag racing applications.
( 2 )
$109.95
TCI RollStops can keep your vehicle solidly planted until you're ready to go. They feature a waterproof 6061 T-6 aluminum solenoid valve that can withstand 3,000 psi, yet draws only one amp of current. Each kit also includes a switch, mounting bracket, inline fuse connector, and mounting hardware.
( 11 )
$130.95
—
$259.95
For serious performance, TCI machined SFI-approved flexplates are a "must have". These .140 in. thick flexplates are constructed of A514 Blanchard ground steel and are SFI 29.1 approved. TCI offers a complete line of Chrysler and Ford flexplates with GM and Ford bolt patterns for use with their adapter plate kits as well as neutral balanced flexplates with 168-tooth and 166-tooth starter rings for Chevy and Pontiac applications. Now you can speed down the track with the confidence of TCI machined SFI-approved flexplates.
( 58 )
$231.95
—
$288.95
TCI Max Shift synthetic transmission fluid was designed with heavy-duty and performance applications in mind. This product will run cooler, prevent excessive wear, and reduce internal friction. Moreover, intervals between fluid changes can be extended, since the fluid resists breakdown much better than conventional oils. For the competitive racer, this translates into quicker lap times and lower ETs. Tow vehicle and RV owners will benefit from increased transmission life, reduced maintenance, and improved mileage. Max Shift STF is compatible with conventional oils, allowing users to simply drain their existing fluid and replace it with STF. This fluid is fortified with special additives to prevent metal-to-metal contact during shock loads, improve fluid cling, eliminate foaming, and prevent transmission seals from hardening and cracking.
( 7 )
$170.95
These TCI flexplate safety shields are designed to protect both drivers and spectators from the effects of flexplate or starter ring failure. Mandatory in many classes of the NHRA, IHRA, and IMCA, each flexplate shield is manufactured from high-strength steel and certified to SFI specifications.
( 20 )
$111.95
—
$186.95
Governor recalibration kits from TCI will allow you to adjust the shift points of your transmission after it is installed in your vehicle. These kits are very useful for transmission swaps, or if you have a car that is very light, or has a low rear gear ratio. They also work great for bracket cars retaining an automatic 1-2 shift.
( 27 )
$130.95
High torque starters from TCI should be your pick for tow truck and street performance applications. These starters are OEM remanufactured with four fields of windings with high-temperature solenoids and will produce 20 percent more cranking power than stock to keep you moving. The high torque starters are resistant to heat produced by performance exhaust headers and will take repetitive cranking without failure. TCI high torque starters offer great power at a small price.
( 28 )
$266.95
—
$279.95
These universal TV/kickdown cables from TCI are designed to be economical replacement throttle valve cables. They feature an adjustable outer sheath, making them true universal replacements.
( 46 )
$194.95
TCI transmission shields are attractive, lightweight, and offer excellent protection in the event of a drum explosion. They're SFI-certified and accepted by all major sanctioning bodies. Manufactured from 6061-T6 aluminum alloy, they come with all mounting hardware for a quick installation, and receive a powdercoated finish for fluid and fade resistance.
( 44 )
$164.95
—
$268.95
Don't go to the junkyard looking for that replacement transmission yoke for your performance application--TCI has you covered. Since your application may not match with manufacturer specifications, TCI can supply you with a matching yoke without any hassles.
( 14 )
$169.95
—
$219.95
TCI high-performance intermediate sprags feature more elements than stock, to provide better holding power. They are available for a variety of applications to suit your needs.
( 2 )
$127.95
TCI EZ-TCU main harnesses are the replacements you need to keep your transmission control unit connected to performance. These are identical to the originals that came with your units, and they offer the right fit and function for your controller. Whether you need them because of damage, loss, or the desire to have a spare on hand, TCI EZ-TCU main harnesses are available as replacements so that you can continue maximum control over shift points, shift firmness, and shift speed.
Not Yet Reviewed
$225.95
These sprags and roller clutch kits from TCI are all-new OEM assemblies. Replacing the forward sprag assembly and low-reverse roller clutch is a must when building a high performance 700R4/4L60E. These forward sprags are 29-element, which makes them ideal upgrades for earlier 700R4 transmissions that were built with weaker sprags from the factory.
( 3 )
$106.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
