Availability
Tanks Inc. adjustable fuel pressure regulators allow you to dial in the proper pressure for optimum fuel performance. These billet aluminum bypass kits are available for either carbureted or EFI setups and include adapter fittings and port plug. Getting fuel from your tank to your engine, excess back to your tank, and making sure your carburetor/injectors get the perfect pressure is a big, important job. Fortunately, Tanks adjustable fuel pressure regulators are up to the challenge! Order the regulator designed for your application.
( 112 )
$98.99
Tanks Inc. MeterMatch fuel gauge interface modules will allow you to convert any ohm range fuel level sender to work with any ohm range fuel gauge. No longer do you need to drop your tank to change or customize your sender, or re-calibrate your fuel gauge. With Tanks Inc. MeterMatch device you can ensure that your gauges are accurately reading your fuel sender and more! Features include: * User can calibrate a custom ohm range (between 0 to 3,000 ohms) * Interface is compatible with nearly any short sweep fuel gauge and fuel sender combination * Module allows gauge calibration at empty, full, and two other points ensuring accurate readings—even with odd shaped gas tanks * Module allows for low and/or high set points that can trigger a blinking LED indicator to alert if gauge exceeds normal values * Screw terminal wire connections * Compact size ( 2.4 in. x 1.85 in. x 0.93 in.) * Simple rotary knob and push button calibration * Programmable voltage correction * Programmable low (or high) alarm (works with a LED indicator) * Programmable averaging can be turned on or off to help minimize needle bouncing * Gauges not included (sold separately from MatchMeter device)
( 23 )
$89.99
Tank Inc. inline fuel pumps are genuine Walbro models. Product details for model GSL392: * 255 lph pump is good for up to 600 hp at 60 psi * External inline fuel pump * 10mm X 1.0 inlet size * 10mm X 1.0 outlet size * 6.5 in. long * 1.7 in. diameter * Do not operate this pump without a fuel filter between the tank and the pump. The pre-filter should be between 20-40 microns. A second 10 micron filter should also be used after the pump before the fuel rail.
( 4 )
$98.99
Tanks Inc. offers a complete line of gas tank accessories, including fuel filler neck and cap kits. These kits are made of quality metals--steel, stainless steel, and aluminum. They are available with threaded, push-through, or pop-up style caps.
( 64 )
$52.99
—
$94.99
Tanks Inc. floor access doors are perfect for accessing fuel pumps and senders. The doors are made from18-gauge stainless steel in a choice of sizes and shapes. Tanks Inc. floor access doors feature low-profile aircraft-style stainless steel hinges, brass coin key latch assemblies, and cam-style latches.
( 45 )
$50.99
Tanks Inc. offers Russell Twist-Lok fuel hose for those demanding quality. The hose is flexible, lightweight, and ideal for most of your automotive applications. Compatible with hydrocarbon and alcohol-based fuel, lubricants, and additives, the hose works with all-AN adapter fittings. Mate them to reusable Twist-Lok hose ends pressure-rated up to 250 psi, which is suitable for most fuel and oil systems. Save yourself some assembly time and money with quality Twist-Lok hose delivered through Tanks.
( 4 )
$87.99
Tanks Inc. adjustable seat risers allow you to install your aftermarket seats at just the right height. These risers can accommodate 7 to 14 in. bolt spacing to fit most seats and brackets on the market. These adjustable powdercoated steel brackets are available in two different models, allowing up to 5 in. of height adjustment.
( 15 )
$51.99
—
$56.99
Is your ride's fuel gauge on the "level"? If you don't think you're getting the right readings or you're getting no reading Tanks can help fix the miscommunication. Their fuel level sending units are quality units built to send reliable, accurate data to your gauge so you will know exactly where you sit on fuel. Keep the communication honest with Tanks fuel level sensors on board.
( 318 )
$50.99
—
$64.99
Tanks Inc. aircraft-style flush mount caps with necks are aluminum gas fills that look great and operate with precision. The polished aluminum pieces feature high-tech cam lock caps that remove by twisting the center tab a quarter-turn. Tanks Inc. aircraft-style flush mount caps/neck kits are equipped with O-ring seals for leak-free performance—and a stainless steel chain tethered to the cap, so you don't leave it at the pump.
( 5 )
$94.99
Make your LS engine swap just a bit easier by incorporating Tanks Inc. LS fuel filter pressure regulators. They feature a fixed pressure set at 58 psi and an internal fuel filter with a nominal micron rating of 5. The bypass-style design has one inlet, one outlet, and one return. Tanks Inc. LS fuel filter regulators are offered individually or as a kit with quick-disconnect fittings.
( 39 )
$77.96
Tanks Inc. fuel pump assembly plates are necessary components when installing your GPA fuel pumps. These hangers come equipped with a wiring harness and 1/4 in. NPT supply and return line.
( 5 )
$104.99
—
$107.99
Tanks Inc. offers a line of replacement filler necks to direct fuel from the gas pump into your tank. They're made from durable galvanized steel, then powdercoated or plated with a protective finish to match the various Tanks Inc. fuel tanks. Numerous styles are available; choose the filler neck designed for your specific car, truck, or van.
( 33 )
$52.99
—
$88.99
Tanks Inc. reed switch fuel level senders provide level information via a series of reed switches positioned inside of the sealed level tube, while an external float with built-in magnets trigger the reed relays to generate an ohm resistance value. With no moving mechanical parts other than the float, Tanks' reed switch fuel level senders are extremely durable and reliable, and they provide flexibility of installation, even in tanks with baffles while reducing slosh fluctuation. They are available for standard aftermarket, VDO, GM, and early Ford and Mopar gauges. Select the reed switch sending unit designed for your gauges. Additional features: * SAE 5-bolt mounting pattern * Full 304 stainless steel construction * Durable NBR float * Compatible with gas, diesel, hydraulic fluids, black water, and grey water * Gasket and mounting screws are included
( 2 )
$52.99
—
$57.99
Protect your fuel system from unwanted contaminants with Tanks Inc. fuel filters. They will ensure that you have clean fuel flowing through your system. Whether you're using a carburetor or fuel injection, you'll want Tanks Inc. fuel filters to keep your fluid clean!
( 16 )
$69.99
Tanks Inc. fuel pump safety switch and relay wiring kits are helpful when you're switching to an electric pump on a carbureted engine. Proper wiring is crucial to the performance and longevity of your fuel pump. Make sure that your fuel pump is receiving full voltage from the battery with this heavy-duty kit. It will provide a continuous supply of voltage to prevent drop-off that's common with OE wiring—which will protect your fuel pump from damage. Additionally these FPSSK kits feature an oil pressure safety switch to turn off the fuel pump in the event of oil pressure loss. Without a safety switch your fuel pump will continue to run, even if a fuel line comes loose or in the case of an accident. Once oil pressure is lost, this kit will turn off the power to the pump. Included with the Model FPSSK kit: * 50 amp relay with socket and pigtail * 30 amp circuit breaker * 15 ft. of 12-gauge fuel pump power wire * 5 ft. of 12-gauge relay power wire * 5 ft. of 14-gauge relay ground and trigger wire * 10 ft. of 16-gauge starter wire * 10 ft. of 16-gauge ignition wire * 1/8 in. NPT male to 1/8 in. NPT female brass tee fitting * 3-prong oil pressure safety switch * Includes terminals and mounting hardware
( 4 )
$69.99
Tanks Inc. offers genuine Walbro high-flow fuel pumps—the highest quality hi-performance pumps on the market. They're available in different flow rates and other options to best suit your application. These are the replacement pumps for Tanks Inc. PA and GPA series in-tank pump kits.
Not Yet Reviewed
$98.99
Tanks Inc. weld-in fuel door assemblies are not just holes in your fender! These fuel filler door kits provide you with push-through caps, magnetic latches, a fuel-proof 6 in. connection hose, and a threaded tube connection. They are available with or without boxed enclosures. Complete your fuel install with Tanks Inc. weld-in fuel door assemblies.
( 9 )
$89.99
Tanks Inc. gas or fuel tank switchover valves are available to replace lost or broken selector valves. Tanks Inc. allows you to run two separate fuel tanks and only draw off of one tank at a time. You would run one fuel line from each tank to the valve, and a line from the valve to your engine. The valves have a 3-port design and work on all 12 V negative ground systems. Switching requires a toggle switch, also available.
( 6 )
$55.99
Tanks Inc. fuel filler neck thread-on bungs accepts push-through caps. The threaded bung kits provide a complete install to finish your fuel system. Each of the kits includes a yellow zinc plated threaded bung and threaded split ring, as well as fuel-proof gaskets, mounting screws with O-rings, and a push-through cap. Need fuel accessories? Just say "Tanks"!
( 3 )
$51.99
Tanks Inc. offers a wide assortment of fuel tank mounting straps for specific vehicle applications. The durable straps are available in a variety of finishes, such as galvanized and E-coated, and some of the models also include mounting hardware. Most use stock bolts and factory location. Secure your fuel tank with straps designed for your particular make and model.
( 38 )
$53.99
The use of flanged fuel filler necks from Tanks Inc. can help prevent leakage from your filler hole. These hose clamp bead-style necks are constructed from galvanized steel and are available in sizes to fit your application. When replacing your fuel tank, count on Tanks, Inc. for all of your tank accessories to complete your project.
( 8 )
$75.99
Tanks Inc. frame horn covers are machined from die-stamped steel for durability. They feature interlocking hemmed construction just like the original equipment. Each cover is black EDP-coated to resist rust and corrosion. Order the pair designed to fit your vehicle application.
( 1 )
$68.99
Tanks Inc. offers a complete line of gas tank accessories, including replacement pop-up aluminum fuel filler caps for use in some of their filler neck kits. The caps are nearly flush when down. For removal, simply push-and-twist to get the center of the cap to pop-up. These pop-up aluminum fuel filler caps from Tanks Inc. look great and perform as you would expect.
Not Yet Reviewed
$74.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
