Availability
Tanks Inc. offers fuel line kits for GM LS that include the hose and fittings needed to hook up one of Tanks Inc. fuel pumps to an LS engine swap setup. They're designed for LS engine swaps using a single fuel inlet fitting for the fuel source. Tanks Inc. GM LS fuel line kits include: * Fuel pressure regulator/fuel filter combination * 25 ft. of -6 AN twist-lock fuel line * Six straight -6 AN straight twist-lock fittings * Two 1/4 in. NPT to -6 AN straight fittings * Three 3/8 in. female quick-disconnect to -6 AN male fittings * 5/16 in. female quick-disconnect to -6 AN male fitting
( 26 )
$198.99
—
$204.99
Tanks Inc. universal fuel line kits include 25 ft. of line and all or most of the fittings that you need to plumb your fuel system when using a Tanks Inc. fuel pump. The kits will give you all the fittings needed to plumb a FI-Tech system and most fittings to plumb systems that use an external fuel regulator, such as MSD Atomic, Holley Terminator, or FAST EZ-EFI. Tanks Inc. universal fuel line kits include: * Fuel filter * Two quick-disconnect fittings for fuel filter * Two 1/4 in. NPT to -6 AN fuel pump adapter fittings * Six -6 AN straight Twist-Lok fittings * 25 ft. -6 AN black Twist-Lok fuel hose
( 19 )
$174.99
—
$374.99
Tanks Inc. fuel rail fitting adapters are designed to fit your stock return lines and fuel rails. The adapters are made of quality materials and are offered in either anodized or zinc plated finishes. They use the factory spring-lock design with an outlet in AN sizes specifically made for braided stainless steel hose. Choose the fuel rail fitting adapter model needed for your application.
( 19 )
$11.99
—
$14.99
The dual fuel tank line kits for GM LS from Tanks Inc. includes 25 ft. of line and all the fittings that you need for your LS engine swap using our fuel pumps and two tanks. The kits are designed for LS engines that have a single fuel inlet fitting. The regulators in this Tanks Inc. dual fuel tank line kit are not recommended with fuel pumps that flow over 255 lph. Kit includes: * (2) Fuel filter/fuel regulators * (2) In-Line check valves * (2) 6AN coupler fittings * (1) 6AN Male Y-fitting * (4) 1/4 in. NPT to -6AN adapter fitting (fuel pump pickup and return line fittings) * (14) Russel straight -6AN straight Twist-Lok fittings * (2) Russell 3/8 in. Male Quick Disconnect to -6AN Male fittings—fuel feed from regulator to engine fitting * (3) Russell 3/8 in. Female Quick Disconnect to -6AN Male fittings—fuel regulator feed from pump and fuel rail fitting * (2) Russel 5/16 in. Female Quick Disconnect to -6AN Male fittings—fuel regulator return line fitting * 25 ft. of -6AN black push lock fuel hose
Not Yet Reviewed
$438.99
Tanks Inc. offers fuel tank vent hoses for use with gasoline and ethanol blends. Here are some product details: * Fuel line/PCV/EEC hose * 5/16 in., sold in 5 ft. increments * Spiral reinforced nitrile tube with NBR-PVC cover * Oil-resistant cover * 50 psi working pressure * 24 In/Hg vacuum rating
( 1 )
$14.99
Tanks Inc. offers Russell Twist-Lok fuel hose for those demanding quality. The hose is flexible, lightweight, and ideal for most of your automotive applications. Compatible with hydrocarbon and alcohol-based fuel, lubricants, and additives, the hose works with all-AN adapter fittings. Mate them to reusable Twist-Lok hose ends pressure-rated up to 250 psi, which is suitable for most fuel and oil systems. Save yourself some assembly time and money with quality Twist-Lok hose delivered through Tanks.
( 4 )
$17.99
—
$87.99
Tanks Inc. fuel line check valves are designed to allow flow in one direction and prevent backflow. They feature a 304 stainless steel check piston that delivers optimum flow with minimal restriction and pressure loss. These valves are ideal for fuel systems due to their low opening pressure of 3 psi. Tank Inc. check valves are offered in a choice of sizes to meet your needs.
( 2 )
$37.99
Tanks inverted flare adapter fittings are manufactured to tight tolerances from quality materials to provide a solid, consistent seal. These fittings are available in a variety of tube and pipe thread sizes.
( 11 )
$9.99
—
$15.99
Fuel your dreams with Tanks Inc. They have the expertise and products to help you with your fuel system. Tanks Inc. hose clamps are made of stainless steel to resist corrosion. They are designed to fit 2 in. or 2 1/4 in. inside diameter fuel filler neck hoses and adapters to help make more reliable connections to your fuel tank and fuel filler.
( 5 )
$3.99
—
$8.99
Tanks Inc. has been a leader in fuel systems for over 30 years. From fuel tanks, EFI conversion, pumps, filler necks, and a full line of accessories, Tanks Inc. has got you covered. These bulkhead fittings are the perfect solution to neatly plumb your new fuel system in a classic, hot rod, race car, or daily driver. They're machined from high-quality aluminum and come complete with washer and nut. Available in different hose barb sizes, the bulkhead fittings are ideal for running fuel or vent lines through a frame, firewall, or any type of panel. When your engine build is complete, look no further than Tanks Inc. to fuel it.
( 5 )
$15.99
—
$22.99
Tanks Inc. NPT to hose barb fittings will assist you with installing your fuel system. These National Pipe Thread to hose barb fittings feature brass construction are available in straight or 90-degree versions.
( 3 )
$8.99
—
$14.99
Replace your worn out filler neck hose and stop wasting money with a costly fuel leak. Tanks Inc. manufactures these fuel tank neck hoses from quality rubber, ensuring years of trouble-free performance.
( 92 )
$23.99
Tanks Inc. weld-on filler cap kits are universal to "fill" many needs. They can be used on power steering tanks, radiator overflow tanks, rear-ends, and valve covers—as well as other locations to replenish fluid or to serve as inspection ports. These kits include either a steel or aluminum weld-in bung with O-ring for leak-free sealing, and an aluminum cap. Order the rear end filler and drain kit that is best suited to fit your application needs.
Not Yet Reviewed
$27.99
Tanks Inc. hose couplers help you to adapt your hose size to most situations. These fittings are machined from steel and then black E-coated for protection against corrosion. They're available in different size hose barbs. Tanks couplers are perfect for your race car, street machine, or off-road vehicle.
( 3 )
$15.99
Tanks Inc. fuel filler neck grommets offer safety and leak-free performance. These rubber grommets are durable, easy to install, and provide a tight seal. Small item, big job; complete your fuel system install with Tanks Inc. fuel filler neck grommets.
( 8 )
$21.99
Eliminate any spills on the road or the track with rollover vent valves from Tanks Inc. These long-lasting brass vent valves help keep any debris or gunk out of the fuel tank. In case of an accident, sudden stop, or driving over rough terrain, rollover vent valves will keep fuel from coming out of the vent. Tanks Inc. rollover vent valves are just the solution you've been looking for!
( 15 )
$32.99
Tanks Inc. offers AN to NPT adapter fittings to help you to complete your project. These aluminum fittings are available in 1/4 in. NPT to -6 AN and 3/8 in. NPT to -6 AN and are given a black anodized powdercoat finish to protect the fittings against corrosion.
( 2 )
$7.99
Tanks Inc. couplers help you to adapt your hose size to any situation. They'e machined from aluminum with a black anodized finish to resist corrosion. Available in popular AN sizes, these versatile fittings are perfect for your race car, street machine, or off-road vehicle plumbing project.
( 2 )
$15.99
Tanks Inc. weld-in half couplings are available in mild or stainless steel. You can weld these in your fuel tank for additional fittings, or you can drill and weld these to the fuel plate.
( 3 )
$4.99
—
$8.99
Looking to add an extra line to your gas tank? Tanks Inc. weld-in flanges are perfect for you! These flange fittings can be used to put a vent, pickup tube, or a drain into a tank. All flanges are 0.134 in. material thickness with 1.745 in. O.D. and are female NPT.
( 3 )
$5.99
Tanks Inc. PA Series fuel pump supply and return fittings are the necessary and correct replacements. These 90-degree brass fittings thread into the top plate of the Tanks PA Series fuel pumps and two are needed--one for the supply and one for the return. They will provide the same fit and performance as the originals they are replacing.
( 2 )
$13.99
Tanks Inc. fuel filler neck thread-on bungs accepts push-through caps. The threaded bung kits provide a complete install to finish your fuel system. Each of the kits includes a yellow zinc plated threaded bung and threaded split ring, as well as fuel-proof gaskets, mounting screws with O-rings, and a push-through cap. Need fuel accessories? Just say "Tanks"!
( 3 )
$31.99
Tanks Inc. pipe plugs are available in different sized fittings. These Allen head plugs are black anodized aluminum to prevent corrosion. Used to close off the ends of pipes and fittings, their design allows for easier tightening and loosening in areas of limited clearance.
Not Yet Reviewed
$4.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
