Availability
On Sale
Summit Racing™ Performance LS7 hydraulic roller lifters are a definite upgrade over stock originals. Designed for high horsepower engines that demand increased oiling and higher-rpm capabilities, these replacement lifters will fit in SBC roller engines, as well as LS-based engines without active fuel management (AFM/DOD). Beat the competition to the finish line with Summit Racing™ Performance LS7 hydraulic lifters!
( 19 )
$229.99
$204.99
On Sale
Summit Racing™ LS lifter and guide kits offer top-quality, precision-made pieces at an excellent value! These kits include a set of roller lifters, lifter guide bolts, and LS2 lifter guides.
( 41 )
$265.98
$240.98
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 55 )
$204.99
—
$379.99
$199.99
—
$339.99
On Sale
Think you have to scour the local bone yards to find a decent set of GM's old double hump or fuelie cylinder head castings? Not true. In fact, we've brought back classic Chevy performance in a big way with these ready-to-run heads for small block Chevy. Our versions of the popular GM cylinder heads offer great performance for less than it would cost to rebuild an old set of double hump castings.
( 126 )
$649.99
$599.99
On Sale
Summit Racing™ flexplate dust covers are manufactured from high-quality steel and are available in your choice of finishes. They allow for easy access to the torque converter area and prevent debris from entering your transmission's bellhousing.
( 345 )
$43.99
—
$50.99
$41.99
—
$46.99
On Sale
You won't find a better quality cam for your LS-based engine than our Summit Racing™ Pro LS series of cams. These convenient combo kits enable you to get the cam along with the correct matching lifters. Pro LS cam, lifters, and trays are included in one easy-to-order part number. Whether for street/strip, turbocharged, or racing use, you'll find the kit recommended for your year/make and engine application.
( 4 )
$551.82
—
$600.57
$540.97
—
$590.97
On Sale
Designed for stock and mildly hopped-up street vehicles, our Summit Racing™ torque converters give you the extra stall speed that you need for quicker launches. They're available for a variety of transmission makes and models. Summit Racing™ converters are computer-balanced and feature: * Submerged arc welds * New turbine hub * Custom stator * New pilot * New impeller hub
( 358 )
$564.99
$509.99
On Sale
Deliver power-building airflow to your engine with Summit Racing™ Vortec cast iron cylinder heads. These heads outflow the early model small Chevy heads with wide-open intake runners, efficient combustion chambers, and a high-performance valve job. They are made from a strong cast iron alloy that makes them less brittle than comparable Vortec heads on the market. For performance and great value, select the Summit Racing™ Vortec cast iron cylinder heads preferred for your build.
( 74 )
$649.99
$599.99
On Sale
Easily lift your engine with one of these Summit Racing™ engine slings. The nylon strap design prevents damage to valve covers, intakes, or any other engine accessory when lifting. The 24 in. straps allow the sling to clear most intake setups. Simply attach the four strap mounting tabs to the engine block and use a traditional engine hoist to safely support your engine during removal and installation.
( 38 )
$112.99
$101.69
On Sale
Summit Racing™ sport seats deliver the look of expensive racing seats without the expensive price tag! Our seats are soft and comfortable with lumbar and shoulder bolsters for added support, cutouts for safety harnesses, and recline and tilt forward mechanisms. Adjustable sliders are also included and you can choose tear resistant nylon, vinyl, or simulated leather upholstery to dress your interior with performance appeal. Get more for your money with Summit Racing™ sport seats.
( 160 )
$219.99
$169.99
On Sale
Shutting down your vehicle's fuel-saving cylinder deactivation system has its advantages. If your AFM lifters are failing or if you're doing performance upgrades, Summit Racing™ offers cylinder deactivation delete combo Pro Packs that will allow your vehicle to run on all cylinders and have full power at all times. Select the kit designed for your vehicle. Cylinder deactivation delete Pro Packs include: * ICT Billet LT lifter valley covers * Summit™ Performance LS7 hydraulic lifters * Summit™ lifter guides * BTR Gen V LT VVT cam timing bolts * ACDelco crankshaft front seal * ACDelco water pump gaskets * Mahle head gasket set * Fel-Pro head bolts * ACDelco harmonic balancer bolts
Not Yet Reviewed
$798.89
—
$901.89
$773.89
—
$876.89
On Sale
Summit Racing™ swing-out door bar kits will enable you to convert an existing side bar to a more convenient swing-out model—no more crawling over the bars to get into your race car! Once installed, these kits allow your door bar to conveniently swing-out of the way with the removal of a quick-release pin. The door bar kits are designed for mild steel tubing of different diameters. Release pin included. Welding required. Order the kit you need.
( 5 )
$133.99
$99.99
On Sale
Summit Racing™ fuel pump and regulator Pro Packs consist of proven performance fuel pumps and regulators. Just select your brand, flow rate, and pressure requirements, and one part number gets you everything. We've even included a relay kit with the electric fuel pump combos. Economical and convenient, Pro Packs are available for virtually any application from the 1950s and up.
( 60 )
$271.94
—
$646.29
$200.90
—
$584.86
On Sale
Summit Racing™ Pro LS torque converters are designed for stock and modified LS-powered street vehicles that make up to 600 rwhp. They will furnish the extra stall speed that you need for quicker launches—and they pair well with our Summit™ Pro LS series camshafts. These computer-balanced torque converters feature: woven carbon lockup clutch lining; heavy-duty Torrington bearings; hand TIG welding; a new pilot, impeller hub, and turbine hub; and a custom stator. The torque converters are available in a variety of options; order the model recommended for your application.
( 35 )
$564.99
$509.99
On Sale
We want you to have reusable filter elements that outflow ordinary paper filters, without spending an arm and a leg. Summit Racing™ reusable air filter elements utilize quality materials and have oil already applied. They're available in dozens of sizes, shapes, and styles—and are a terrific value.
( 229 )
$50.99
—
$57.99
$39.99
—
$50.99
On Sale
With Summit Racing™ tubular rear trailing arms you get heavy-duty tubular steel construction, which is lighter weight but adds stability and strength, a durable black powdercoat finish, and long-lasting polyurethane bushings. Our tubular rear trailing arms offer a great alternative to rusty old stamped factory arms.
Not Yet Reviewed
$519.99
$479.99
On Sale
Summit Racing™ double-adjustable ladder bar kits are built for strength, consistency, and ease of adjustment. Fabricated from 1 in. diameter DOM tubing, these 32 in. bars come complete with all hardware--including 3/4 in. heims--and use a large 3/4 in. front bolt. The double-adjustable link allows you to make quick pinion angle and preload adjustments without removing the bars from the car. Easy to install and simple to adjust, nothing hits the tires like a Summit Racing™ double-adjustable ladder bar suspension. Installation by a certified welder is recommended. Additional product details: * Durable black powdercoat finish * Rod end safety loops included * 3/4 in. rod ends, adjusters, jam nuts, and Grade 8 hardware * 3/16 in. weld-on housing brackets * Set up for 32 in. from center of housing to center of rod end
( 3 )
$329.99
$296.99
On Sale
Summit Racing™ offers dead-blow hammers for use by body shops, metal fabricators, woodworkers, machinists, and other trades. The polyurethane mallets are available in different weights, handle lengths, and head styles. Dead-blow hammers provide a balanced swing to effectively complete your tasks.
( 64 )
$21.99
—
$34.99
$18.69
—
$29.74
On Sale
Summit Racing™ professional flaring tools enable you to conquer a variety of different plumbing jobs—including brake lines, transmission cooler lines, and fuel lines! These tools are designed to easily form 37 or 45 degree double, single, and bubble flares in OE steel, stainless steel, and soft metal tubing. All of the brake-flaring forming dies are mounted right on the turret, so there's no fumbling around for small parts or worry about missing dies. Their 'turret-style' design allows you to make precision flares in record time, and they can be used with 3/16 in., 1/4 in., 5/16 in., and 3/8 in. diameter lines. The T-handle screw clamp secures your line in place while forming. Fabricating hard lines begins with serious tools—Summit Racing™ professional flaring tools! Order the model that forms the angles you need.
( 13 )
$249.99
$189.99
On Sale
A properly fabricated intake manifold can produce significant gains in your engine's performance. Add one of our Summit Racing™ fabricated intake manifolds to your engine combination to make more power! Each of these stock/OEM deck engine block style intake manifolds is manufactured to exacting standards utilizing the latest CNC machining and fabricating equipment. Simply find and order a perfect fit for your specific make and model vehicle.
( 29 )
$349.99
—
$469.99
$249.99
—
$369.99
On Sale
Give your battery extra protection and reduce underhood clutter with Summit Racing™ rugged fabricated aluminum battery boxes. Fabricated aluminum boxes feature a sealed design with an external vent tube. They come complete with hold-downs, hold-down brackets, and high grade nuts.
( 51 )
$161.99
—
$190.99
$143.99
—
$169.99
On Sale
Summit Bucks
Summit Racing™ Performance turbochargers have the latest in compressor aero technology with quick-spooling, yet free-flowing turbines. Starting with 66mm inducer sizes and working up to 79mm, the SUM-2600 Series turbos are reliable and a great value. The SUM-2700 Series are true race turbos starting at 76mm and go up from there. T4, T6, and V-band turbine housings are available. These are specially designed, balanced, and precision assembled in North America for class leading racers. They feature 2618 billet forged compressor wheels that offer superior flow and dependability at high boost.
( 7 )
$899.99
—
$1,699.99
$769.99
—
$1,594.99
On Sale
Summit Racing™ input shafts are manufactured to meet your high performance needs. These shafts are forged from either 4340 or 300M steel. and come in a variety of applications and different power ratings to fit your budget.
( 10 )
$497.99
$348.99
On Sale
Summit Racing™ intake manifold and installation Pro Packs are now all in one part number. With Summit Racing™ intake manifold and installation Pro Packs, you can get your satin-finished, square-bore intake, plus all of the installation items that you need to finish the job, and save time and money! These Pro Packs also include Loctite black RTV sealant.
( 42 )
$506.85
$362.85
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
