Availability
Summit Racing™ nitrous torque converters can make a difference in how your race car performs. Our performance torque converters are rated at 800 hp and are good choices for your nitrous, blower, and trans-brake applications. They feature fully furnace-brazed fins and anti-ballooning plates to strengthen the converters internally for reliable high performance in your application. Some converters are available with a billet cover for added strength and durability. Be more competitive at the strip and get more performance on the street--install one of our Summit Racing™ nitrous torque converters.
( 21 )
$549.99
—
$610.99
The Summit Racing Pro LS forged pistons are affordable and built to withstand the rigors of high boost and nitrous. These pistons are forged from Premium 2618 alloy - the strongest made. They have specially profiled piston skirts, which allow them to run a tight piston-to wall-clearance for maximum ring seal and minimal friction. They have many other high-tech features too! • Maximum ring-land thickness for power-adders • Dedicated forgings for the best strength-to-weight ratio • Multiple compression ratios specifically targeted for 4.8L, 5.3L, 5.7L, and 6.0L engines • Designed around Premium file fit rings with Gas-Nitride or Plasma steel tops and ductile Napier second rings • Available in versions for Gen. 3 Press-fit, Gen. 4 Floating, and Aftermarket 6.125 rods • Standard and Stroker versions available • Generous valve reliefs that work with both Cathedral port AND Rectangle port heads • Pressure-fed pin-oiling • Pressure seal groove in 2nd ring land for increased seal. • High-Speed brush deburring to remove sharp edges that cause detonation • Ultra-Modern 2.250 pin forgings clear the reluctor rings with stroker cranks • Durable Chromium Steel wristpins. • Replacement Singles Available
( 70 )
$622.99
—
$649.99
Summit Racing™ Forged Pro Pistons brings modern engine piston technology to older engine platforms at the great value. Why use an antiquated piston designed fifty years ago in your new build? A great piston starts with a great forging. Forged Pro piston forgings are stronger AND lighter. This makes more power AND takes stress off the crank, rods and block at higher rpm. It also saves money balancing a crank when heavy metal is not required. Forged Pro pistons are designed around ultra-modern Nitride Steel top ring packs and Summit GP Gas Ported variants. Less friction results in more power and less bore wear. Superior machining results in less blowby for less oil consumption and longer life is the result. Better rings are great horsepower per dollar! Most old production engines were designed to run on 87 octane in heavy vehicles. If you're building a performance engine, chances are you're running it on 91+ octane and you might as well add a little pop. Forged Pro pistons yield an extra 1/2 point of compression in most instances. This is free power from idle on up for the life of the engine! Forged Pro pistons have extra thick ring lands for moderate boost and nitrous. Special care has been taken to deburr critical areas for more strength and less chance of detonation. Special skirt profiles are designed to run at tighter clearances than other forged pistons for less piston rock. This helps them make more power, run quieter and last longer than other forged pistons. Make your build run with the best of them!
( 6 )
$617.99
—
$655.99
Summit Racing™ Pro LS forged H-beam connecting rods deliver industry-leading fit, finish, and durability at an affordable price. They're available in different size options, individually or in a set of 8. Check out the long list of premium features: * 4340 forged steel * Tested to over 1,200 hp in boosted applications * Designed for up to 5,000 ft. per minute avg. piston speed in Street and Drag applications * ARP 2000 rod bolts with 200,000 psi tensile strength * Dual ribbing on rod cap for maximum strength * Stroker clearanced--minor cylinder notching may be required * Accommodates most camshafts with 4.250 stroke * Bores finished to +/- .0001 in. * Balanced to within +/- 1 gram per end * Full-floating with precision-honed bronze bushing * Small-end supports the wrist pin with minimal side clearance for maximum shear strength * Each rod is magnetic particle tested to ensure flawlessness * Shot-peened finish to remove potential for stress risers
( 19 )
$699.99
On Sale
Summit Racing™ Pro LS camshaft and spring kits are designed for GM LS engines. Each cam kit offers a budget-friendly option without sacrificing quality and performance. They're available in Stage 1 or 2 performance configurations. Stage 1 kits include the cam and matching drop in beehive springs with seals or optional upgraded dual spring and retainer kit. Stage 2 kits give you an additional cam change gasket kit and a crank bolt. Order the Summit Racing™ Pro LS camshaft kit recommended for your year/make and engine application.
( 37 )
$527.21
—
$736.95
On Sale
You won't find a better quality cam for your LS-based engine than our Summit Racing™ Pro LS series of cams. These convenient combo kits enable you to get the cam along with the correct matching lifters. Pro LS cam, lifters, and trays are included in one easy-to-order part number. Whether for street/strip, turbocharged, or racing use, you'll find the kit recommended for your year/make and engine application.
( 4 )
$572.30
$561.97
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
