Availability
Remove old cam bearings and install new ones like a professional with our Summit Racing™ cam bearing installation tools. These kits contain an arbor with the drive mount, drive spools, spool stabilizers, and a drive cap. Even if it's your first time installing cam bearings, the instructions will walk you through the process with success.
( 194 )
$65.99
—
$81.99
Summit Racing™ cam bearing alignment tools are simple, sturdy, and take your engine building skill to the next level. These tools bolt to the block and extend out from the #1 cam bearing journal 16 in. They hold the cam bearing knocker's alignment cone perfectly concentric and in-line, ensuring the front cam bearing goes in dead straight every time.
( 1 )
$89.99
Summit Racing™ cam phaser tools pressurize the phaser with air, allowing it to float for piston-to-valve clearance checks through the phaser's range. Available in several styles, select the appropriate to your application.
Not Yet Reviewed
$99.99
Our Summit Racing™ cam-change gasket sets have all the gaskets and seals you need to make the job easier. They include gaskets for the valve covers, oil pan, fuel pump, water pump, intake manifold, and timing cover, as well as a seal for the timing cover.
( 59 )
$50.99
Summit Racing offers True Roller timing sets for a wide range of vehicles from the 1950s and up. These single- or double-roller sets have rugged true-roller chains, teamed with steel crank and cam sprockets. The crank sprockets feature multiple keyways, which allow you to set the cam timing to your choice of degrees in advanced, retarded, or normal. Order the timing set recommended for your year, make, and engine application.
( 176 )
$58.99
—
$83.99
Summit Racing™ cast aluminum timing covers are the perfect addition to your powerhouse. They feature a stout diecast aluminum design to keep true, and have thick gasket rails for rigidity and optimum oil sealing. With their show-polished finish, you'll be sure to turn some heads when you pop the hood. These replacement timing covers are available in a variety of styles, shapes, and finishes—for year/make and engine applications from 1955 and up.
( 116 )
$69.99
—
$89.99
Get your vehicle's timing in check using one of these Summit Racing™ LS2 timing chain and accessory kits. They include a timing chain set, crankshaft bolt, timing cover gasket, and valve cover gasket sets. You'll be able to freshen up your timing system with all of the necessary components. Order the model recommended for your year/make and engine application.
( 8 )
$105.96
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. Summit Racing™ springs are made from high quality steel with precision winding and surface treatments. Special consideration for reduced valvespring and retainer mass ensures stability at high rpm. This reduces valve float, extends the rpm range, and greatly reduces valvetrain wear.
( 30 )
$71.99
Match your camshaft with Summit Racing™ distributor gears. These small, durable replacement gears make a big impact on your engine's performance. They're available in a variety of materials and sizes for applications from the 1950s and up. Order the model recommended for your vehicle.
( 76 )
$77.99
Installing a new camshaft is a sure way to improve horsepower—just remember that the rest of the valvetrain must be upgraded for proper operation. These Summit Racing™ valve spring and retainer kits include everything you need to keep your engine running in top shape after a cam swap. Each set features high-quality valve springs, steel retainers and locks, and Viton® seals. They're available in multiple size options.
( 71 )
$104.99
Our Summit Racing™ harmonic balancer wrenches rotate the crankshaft the proper way when turning the engine with the balancer installed. The cold-rolled steel adapter easily attaches to most balancers and comes in handy when assembling an engine or degreeing a cam. These wrenches require a 3/8 in. or 1/2 in. ratchet or breaker bar to rotate the engine.
( 33 )
$61.99
—
$88.99
Performance cam designs require performance valve springs to keep everything under control and running smoothly. And modern springs with non-stock diameters require new retainers to handle the recommended higher pressures and installed heights. Summit's® steel valve spring retainers are an affordable solution. Precision-machined from 4140 chromoly and finished in black oxide, these retainers are specifically designed for positive retention and location when combined with performance valve springs. They're available for single, double, and beehive-style spring applications.
( 12 )
$50.99
Trust Summit Racing™ to give you timing sets that will deliver accurate, reliable cam timing. Our billet steel true roller timing sets have rugged double-row, true-roller chains teamed up with billet steel crank and cam sprockets. The crank sprockets have multiple keyways, which allow you to modify your cam timing. Get reliable timing from Summit Racing™ billet steel timing sets.
( 119 )
$101.99
—
$110.99
Summit Racing™ vacuum reservoirs will let you run power brakes with a radical, vacuum-robbing camshaft. Take your choice of our steel or aluminum options, with multiple sizes and a half-dozen finishes available. The steel reservoirs come with a Summit Racing™-designed check valve and hardware; while the aluminum reservoirs include mounting bolts, a machined hose fitting, check valve, and a hole drilled for one of our optional vacuum gauges. Brake hose is not included.
( 231 )
$54.99
—
$109.99
Whether you’re a master technician or you don’t know a distributor from a dipstick, the Visible V8 model kit puts engine building in the palm of your hand! Learn all about the inner workings of the V8 as you assemble the 314-piece kit, then turn the hand crank and watch as the crankshaft moves the connecting rods and pistons, and the camshaft operates the rocker arms and valves—just like the real deal! It also has details like a working fan and accessory pulleys, a distributor with plug wires, a carburetor topped with an air cleaner, and much more! The completed 1:4 scale model measures 12" long and looks great displayed on the included engine stand. Recommended for ages 12 and up (skill level 3), model cement required (not included).
( 19 )
$109.99
If you're building an engine or doing a cam swap, you'll want one of our Summit Racing™ crankshaft sockets in your toolbox. They're available for a variety of engine applications. Not only do these accept 1/2 in. drive ratchets or breaker bars for turning your engine over, but we've built in the provision to mount a cam degree wheel. Each crank socket features a durable black oxide finish and is precision machined from carbon steel for a tight fit over the crank snout. We've knurled the degree wheel retaining nut for a tool-free grip and quick adjustment when turning the degree wheel on the socket for finding top dead center.
( 7 )
$50.99
—
$69.99
Summit Racing™ HDR premium thick-wall pushrods are a great upgrade for your engine. Factory pushrods (and even .080 wall aftermarket versions) act like a pogo stick in a running engine. Not only is static spring pressure working against them, it's also the valvetrain inertial mass increasing with RPM. This reduces power and valvetrain life. While a .080 thin-wall pushrod may not break, it doesn't mean it's the best option. Enter the HDR's. Summit™ used FEA (Finite Element Analysis) in the initial testing. We didn't just compare them to thin-wall welded-ball factory pushrods, but with aftermarket models, as well. The results speak for themselves! * The Summit™ HDR 5/16 x .105 wall pushrods have 20 percent less stress and 25 percent less deflection than a typical 5/16 x .080 chromoly pushrod * The Summit™ HDR Pro LS 11/32 x .120 wall have 25 percent less stress and 28 percent less deflection than a typical 5/16 x .080 wall chromoly pushrod * The Summit™ HDR 3/8 x .135 pushrods commonly used in big blocks has 15 percent less stress and 20 percent less deflection than a typical 3/8 x .080 wall chromoly pushrod Summit Racing™ added other high-end features like 210 degree ball ends to cope with extreme lobe lift and clear the rocker and are available in multiple lengths. * HDR 5/16 pushrods are offered in common LS, SBC, and SBF lengths * HDR Pro LS 11/32 pushrods add .030 diameter AND .120 wall thickness over a 5/16. Although most LS engines came with 5/16 pushrods, 11/32 pushrods fit any stock or aftermarket cylinder head. The added thickness adds much needed strength to any LS cam swap or engine build. Being available in .025 in. increments allows for fine tuning of hydraulic lifter preload with the LS's non-adjustable rockers. * HDR 3/8 pushrods fit the LS7 and common BB Chevy combinations. They have .135 wall thickness for maximum strength. Pushrods are some of the best horsepower-per-dollar components in your engine, so step up to the HDR's for your build!
( 57 )
$89.99
Summit Racing™ Pro LS forged H-beam connecting rods deliver industry-leading fit, finish, and durability at an affordable price. They're available in different size options, individually or in a set of 8. Check out the long list of premium features: * 4340 forged steel * Tested to over 1,200 hp in boosted applications * Designed for up to 5,000 ft. per minute avg. piston speed in Street and Drag applications * ARP 2000 rod bolts with 200,000 psi tensile strength * Dual ribbing on rod cap for maximum strength * Stroker clearanced--minor cylinder notching may be required * Accommodates most camshafts with 4.250 stroke * Bores finished to +/- .0001 in. * Balanced to within +/- 1 gram per end * Full-floating with precision-honed bronze bushing * Small-end supports the wrist pin with minimal side clearance for maximum shear strength * Each rod is magnetic particle tested to ensure flawlessness * Shot-peened finish to remove potential for stress risers
( 19 )
$106.99
Summit Racing™ Pro LS Billet adjustable single row timing gears provide maximum strength and reliability for your engine build. These single-row chains are precision machined and available in standard, 0.005 under, and 0.010 under lengths for align-honed blocks. Summit Racing™ Pro LS Billet adjustable timing gears work with 3-bolt performance cams and come in both 1X and 4X configurations to match any LS engine. More product features include: * Captured degree bushings that allow the cam to be advanced or retarded in 2-degree increments * Compatible with factory LS2 timing chains
( 1 )
$62.99
—
$63.99
On Sale
Are you rebuilding your engine or installing a new camshaft? These Summit Racing™ timing chain and gear set Pro Packs include a new double-roller timing chain set, a cam change gasket set, rocker arm oil deflecting clips, assembly lubricant, and Loctite RTV 598 silicone. Complete your cam change with one of these Summit Racing™ timing chain and gear set Pro Packs.
( 18 )
$102.56
$100.30
Summit Racing™ offers Extreme Performance coated brake rotors for thousands of vehicles, from the 1960s and up. They're manufactured on CNC machines using CAD-CAM design for perfect balance and alignment, then coated with silver zinc to resist corrosion. These rotors provide you with maximum stopping power, reduced warping, and longer life. The cross-drilled holes and slots provide an exit route for gasses and dust, resulting in better heat dissipation and less brake fade under hard use. Other solid-surface rotors allow gasses to create a cushion between the pad and the brake rotor, resulting in poor brake performance. The cross-drilled holes and slots clear away harmful gasses, restoring full pad-to-rotor contact. These coated rotors are a terrific performance upgrade when replacing your brakes. Order the model recommended for fitment on your vehicle.
( 68 )
$51.99
—
$125.98
Summit Racing™ quick-release fastener weld plates are the anchors for quarter-turn, cam-lock, and quick-release fasteners, including our own Summit Racing™ lines and other forms of quarter-turn fasteners. They mount on the part of the vehicle to which you're attaching the removable panel and carry the special spring that the fastener uses as an anchor. These plates are a required part in many quick-release fastener installations. The weld plates are available in different thicknesses--and bulk orders are available in sets of 40.
Not Yet Reviewed
$93.56
—
$97.16
Summit Racing™ quick-release fasteners are ideal for applications where fast and frequent access is required. The quarter-turn, cam-lock fasteners are perfect for holding fiberglass, metal, or composite bodywork and components in place. In order to retain these removable components securely, the fasteners pass through the part being held in place. Then they grab onto special springs mounted to an appropriate part of the vehicle, often on special metal weld plates. Quick-release steel fasteners are cadmium plated and available in multiple head styles and shank lengths.
Not Yet Reviewed
$68.36
—
$79.16
These Summit Racing™ mechanical lifters are manufactured using the tightest tolerances in the industry, ensuring optimum performance. The crown of the lifters is ground to a precise radius for proper break-in and to guarantee long life. The Summit Racing™ mechanical lifters feature an oil-metering band milled to the correct depth to prevent too much oil from being delivered to the top of the motor and to prevent horsepower loss.
( 2 )
$109.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
