Availability
Summit Racing™ brake proportioning valves keep the proper amount of brake fluid pressure applied to your front and rear wheels. You should choose more quality for less money with Summit Racing™ brake proportioning valves.
( 282 )
$55.99
—
$104.99
Our Summit Racing™ carburetor jet kits are just what you need to tune your Holley carburetor. The kits consist of two each of 36 different jet sizes, ranging from #64 to #99. The jets are organized by size in a plastic carry case so they're accessible when you need them.
( 110 )
$78.99
Need better temperature control? Summit Racing™ Classic OEM heater cores will get your heater and defroster functioning properly once again. Designed to perform and built to last, our heater cores feature either aluminum or copper/brass construction and high-strength alloys to resist corrosion to serve you longer. They also offer an OE fit to make your installation easier. Keep your vehicle cabin warm with Summit Racing™ Classic OEM heater cores.
( 253 )
$59.99
—
$115.99
Simplify your tune-ups and keep them budget-friendly with our Summit Racing™ cap and rotor kits. These affordable kits are molded from premium materials and have brass or aluminum inserts depending on application.
( 376 )
$51.99
—
$79.99
Save yourself time and money with brake line fitting assortment sets from Summit Racing™. Manufactured from quality material, the fittings are available in thread pitches and configurations to suit your specific brake setup. Each kit includes a convenient plastic storage case with separated compartments labeled with the proper sizing of each fitting for quick, easy identification.
Not Yet Reviewed
$90.99
Whether you're looking for more power or simply trying to refresh the motor, there will come a time when you'll need Summit Racing Equipment® LS engine hardware kits. These kits include brass freeze plugs and main cap side bolts for your LS engines. Your rebuilt engine will not be complete without Summit Racing Equipment® LS engine hardware kits.
( 2 )
$57.78
Multi-port EFI systems need a stable fuel supply at any rpm, and Summit Racing™ high-pressure, high-flow electric fuel pumps supply it. Summit Racing™ high-flow pumps also have 5/16 in. inlet and outlets, brass stud terminals for secure connections, and two included cushioned clamps for inline mounting. They're ideal as stand-alone pumps for multi-port EFI systems on engines making up to 500 hp, or as boosters for nitrous applications. Mounting bolts and fuel filter are included.
( 6 )
$109.99
Summit Racing brings you our ultimate ignition wire with our 8.5mm 50ohm wire sets. They are made with 100% high tear resistant silicone construction, a 50ohm per foot Wire-Wound FERRITE magnetic suppression core, stainless steel and brass terminals and extreme heat-resistant boots. Only the highest quality raw materials and Made in the USA workmanship, go into every set. The 100% High-Tear resistant silicone jacket protects the inner ferrite core from heat breakdown. The dual silicone layers are bonded together using a tightly woven fiberglass matting that virtually eliminates terminal pull off. Our 50-ohm ferrite core has over 3 FEET of nickel/copper mag winding per INCH! With this tightly wound core, you can be assured that your spark plugs are getting all the power your ignition system can provide. Stainless steel terminals with Posi-lock hardened clips and brass terminals are used on all applications; for superior connection and consistent voltage delivery. High heat silicone and high dielectric strength polymers make up the extreme composition of the spark plug boots. Our boots provide superior radiant heat resistance for longevity and high dielectric strength properties to prevent voltage leakage. With all of these features built into our Race-proven 8.5mm 50-ohm sets, you can be assured that installing one of these sets on your engine will give you all the performance and durability you have come to expect from Summit Racing products.
( 196 )
$68.99
—
$92.99
With Summit Racing™ branded, all-100 percent silicone 8mm constructed wire, a 300 ohm per foot wire-wound EMI suppression core, high-heat silicone boots, and stainless steel and brass terminals, you get all the high-end features a wire set can offer, without breaking the bank! * Dual silicone high tear-resistant jacketing with fiberglass matting gives you the highest heat protection and superior terminal pull-off values in the business * Our 300 ohm per foot wire-wound magnetic suppression core maximizes the voltage output of your ignition system, while maintaining high EMI resistance values * Stainless steel terminals with posi-lock hardened clips and brass terminals are used for superior connection and consistent voltage delivery * Ultra-high heat silicone spark plug boots provide superior radiant heat protection -- High dielectric strength properties virtually eliminate voltage leakage and blow through Installing our Summit Racing™ high-end 8mm sets will give you the confidence, reliability, and performance you expect from Summit Racing™ products.
( 1016 )
$51.99
—
$82.99
Looking for a cool way to dress up your engine compartment? Check out our vast assortment of Summit Racing™ hose fittings. They're available in chrome plated steel, brass, stainless steel, or anodized aluminum versions. As with all Summit Racing™ parts, the fittings are designed to provide quality and a proper fit. They are available in a wide range of sizes, angles, finishes, styles, and attachment options.
( 387 )
$52.99
Tune-up your entire ignition at once with Summit Racing™ Volt Max X-TREME spark plug wires, cap, and rotor kits. They're made to handle extreme conditions while perfectly matching OEM specs. The ultra-low resistance wire core is wrapped in a high dielectric capacitance jacket to keep voltage directed to the plug, and is protected by a tough silicone outer jacket. Stainless steel terminals (solid brass for Ford D.I.S. applications) with hardened, positive snap-locks ensure a permanent connection, and the silicone boots can handle up to 450 degrees F of heat. The wire sets include dielectric grease to seal terminals and boots, plus wire separators (a must if your OEM wire are 7mm). Select the tune-up kit designed for your vehicle.
( 152 )
$53.98
—
$112.98
Professional results start with professional-grade products. Our Summit Racing Equipment® polishing compounds are available in the following non-toxic, biodegradable compounds: * Tripoli brown rouge--medium cutting on aluminum and other soft metals. Removes 220-grit and finer scratches. Good for buffing and brightening copper, aluminum, brass, zinc, pewter, bronze, hard rubber, wood, and painted surfaces. * White rouge--light cutting. Removes scratches left by Tripoli compound and red rouge. Ideal for buffing stainless steel, nickel, chrome, and iron. Produces a brilliant shine. * Red rouge--removes light scratches on silver and gold. Great for re-buffing work after using other compounds to get a higher luster, especially on aluminum and stainless steel. * Black emery cake--aggressive grit for fast cutting, coarse buffing, and removing 400 to 50-grit scratches from stainless steel, steel, and iron. Also great for removing rust, scale, weld stains, tarnishes, blemishes, light pits, scratch marks, and sooty deposits.
( 5 )
$53.99
Get rid of those old fuel bowl floats—and upgrade to a Summit Racing™ carburetor float. They're manufactured from Nitrophyl or brass and include thread-in brass jet extensions (where noted). Available for side hung or center hung fuel bowls, Summit Racing™ floats will keep your fuel level where it's supposed to be. Order the model recommended for your carburetor application.
( 28 )
$59.99
We know you want to get the most out of your ride, so your parts can't just perform--they've got to look good, too. That's why we've manufactured these Summit Racing™ HEI upgrade kits, which feature color-matched components--an industry first! They include an alkyd distributor cap with brass terminal connections, a rotor, a matching coil cover, a cable retention ring, and a high-performance, low-resistance, carbon-to-coil rotor conductor.
( 26 )
$59.99
—
$74.99
We put these complete fuel lines together a few years ago for single feed carbs. With these kits, you get a fuel pressure gauge, a chrome plated brass housing fuel filter, and an NPT pipe fitting for braided hose. The line mounts to your carb's fuel line fitting with a special collar bracket that allows fuel to flow easily from the line to the carb. Summit Racing™ moved the gauge to an inline position with the filter for a more compact assembly that can be set at the angle needed for air cleaner clearance and easy access.
( 5 )
$79.99
Summit Racing™ offers a variety of door hinge repair components, including door hinge pin and bushings for many 1980, 1990, and year 2000 Chevy and GMC make and model trucks. These factory-size stainless steel and zinc door hinge pin and bushing replacements are available for one-door, two-door, or four-door applications. Most pins include brass bushings and/or clips. Choose the door hinge pin and bushings for your application needs.
Not Yet Reviewed
$59.99
—
$109.99
Car and motorcycle enthusiasts can tell you there's no shortage of metal for them to maintain. Immediate impressions are often based on a brilliant shine versus a dull, corroded appearance. That's why Summit Racing™ Metal Polish has quickly become a staple for regular car show prep--or just to cruise around town with the flashiest chrome, aluminum, steel … virtually any metal! Just apply Summit Racing™ Metal Polish with a soft towel and rub to remove oxidation. Then, use a clean towel to buff to a high-shine finish that'll last for months. A 16 oz. bottle will get you started, but when you see the amazing results, you'll want more, and thanks to Summit Racing™ Bulk you will have it on hand.
Not Yet Reviewed
$71.93
How would you like to connect your air hoses quickly and easily? Give our Summit Racing™ push-to-connect air hose kits a go! These packages furnish components you'll need to upgrade to a high-quality shop air system--and without the hassle of piecing everything together. The kits include a 50 ft. length of 1/2 in. O.D. clear tubing to run your air lines, plus an assortment of elbow, union, and connector fittings.
Not Yet Reviewed
$79.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
