Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Summit Racing™ LS Lifter and Guide Kits
Summit Racing™ LS lifter and guide kits offer top-quality, precision-made pieces at an excellent value! These kits include a set of roller lifters, lifter guide bolts, and LS2 lifter guides.
( 41 )
$213.28
—
$241.98
Summit Racing™ LS Main Cap Bolt Kits
Rebuilding your GM LS engine? Replace those old main cap bolts with our Summit Racing™ LS main cap bolt kits for peace of mind. Our kit includes all 30 bolts to get the job done. They meet the same high-quality and specifications as your factory bolts.
( 16 )
$149.99
Summit Racing™ LS Series Retrofit Trunnion Kits
Summit Racing™ LS Series retrofit trunnion kits are the answer for LS engines with higher lift camshafts and heavier-than-stock valve springs. These trunnion bushing kits are designed to maximize peace of mind by completely eliminating the needle bearings and providing maximum lubrication to the trunnion—while also providing maximum load carrying capabilities many times greater than needle bearings. Rocker arm trunnion upgrade kits include: * 16 micro polished hardened steel pivots/trunnions * 32 high performance C932 bearing bronze bushings * 32 retainer clips
( 70 )
$179.99
Summit Racing™ LS Engine Gasket Kits
Build, rebuild, or upgrade, Summit Racing™ LS engine gasket kits will help to make your project a success. Made from high-quality materials, our gaskets offer leak-free sealing performance at an affordable price. Choose a kit to service your LS-equipped vehicle. LS engine gasket kits contain: * Valley cover gasket * Header gaskets * Oil pan gaskets * Water pump gaskets * Front cover gasket * Valve cover gaskets * Damper seal * Rear cover gasket * Rear main seal * Water crossover/block-off gaskets * Oil filter adapter bypass gasket * Oil galley plug * Knock sensor grommets
( 12 )
$179.99
Summit Racing™ Pro LS Piston Rings
Summit Racing™ Pro LS piston rings are available in numerous sizes, thicknesses, and materials to complement their line of Pro LS forged pistons. These replacement ring sets serve a variety of important roles, including sealing the combustion chamber, improving heat transfer from the piston to the cylinder wall, and regulating engine oil consumption. Order the rings designed to fit your application.
( 43 )
$145.99
—
$155.99
Summit Racing™ Pro LS Steam Line Kits
When upgrading your LS-powered vehicle, don't forget to replace the factory steam tubes. Our Summit Racing™ Pro LS steam line plumbing kits eradicate trapped air and steam pockets from your engine to prevent hot spotting and overheating as well as provide more flexibility when using aftermarket intakes. Kits vent all 4-corners (except SUM-220952 and SUM-220952B kits) and contain black anodized billet aluminum fittings, steam port adapter, O-rings, stainless steel bolts, -3AN or -4AN hose and hose ends, (stainless steel hard lines and 5-port distribution block on SUM-220959 kit only) to make installation easy and more attractive than OEM lines, offering a cleaner look and better waterflow.
( 18 )
$169.99
Summit Racing™ Pro LS Billet Adjustable Single Row Timing Chain Sets and Gears
Summit Racing™ Pro LS Billet adjustable timing sets and gears provide maximum strength and reliability for your engine build. These single-row chains are precision machined and available in standard, 0.005 under, and 0.010 under lengths for align-honed blocks. Summit Racing™ Pro LS Billet adjustable timing sets and gears work with 3-bolt performance cams and come in both 1x and 4x configurations to match any LS engine. More product features include: * Captured degree bushings that allow the cam to be advanced or retarded in 2-degree increments * The upper gears are compatible with factory LS2 timing chains
( 14 )
$127.99
—
$141.99
Summit Racing™ Adjustable LS Conversion Engine Mounts
Summit Racing™ adjustable LS conversion engine mounts make your swap easier. They are made from strong steel, powdercoated for added durability, and simple to install to your OEM-style 3-bolt engine mount. Do your LS conversion with our Summit Racing™ adjustable engine mounts.
( 26 )
$166.99
Summit Racing™ Dual Valve Spring Upgrade Kits for GM LS
Summit Racing™ offers higher rate dual valve spring upgrade kits for GM LS engines. The kits include springs, retainers, seals, locators, and locks—everything you need for a complete upgrade!
( 16 )
$217.99
Summit Racing™ Pro LS Valve Covers
Replace your old and generic looking valve covers with a new pair of Pro LS valve covers from Summit Racing Equipment®. These cast aluminum valve covers are available in a variety of styles, height profiles, and finishes to dress up your engine bay.
( 33 )
$172.99
—
$221.99
Summit Racing™ LS Water Manifolds
Getting coolant to your engine when using a remote mounted water pump is easier and cleaner with our Summit Racing™ LS water manifolds. Crafted from aluminum with a red or black finish, these 7-port (3 inlet/4 outlet) blocks come complete with hardware and six low-profile ORB plugs. Dress up the looks and performance of your engine bay with a handsome Summit Racing™ LS water manifold. Select the color you prefer.
( 3 )
$205.99
Summit Racing™ Universal LS Spark Plug Wire Sets
Summit Racing™ Universal LS spark plug wire sets are what you need to move those coils off the valve cover. These kits provide it all, no matter what your build is, where your coils are mounted, or what boots are required for each individual spark plug. Features include: * 5 ft. length plug wires (coil ends pre-assembled with 135 degree boots for the GM LS and Gen V LT Style Coil Packs and 90 degree boots for the IGN-1A or "Smart Coil" Packs) * Spiral core wire, 120 ohm, with 8mm thick jacket * Eight plug wires, eight each of 135 degree, 90 degree, and straight boots, and terminals
( 9 )
$105.99
—
$109.99
Summit Racing™ LS Serpentine Bracket Kits
Summit Racing™ offers LS Serpentine bracket kits for a wide range of Chevrolet vehicles from 1997 and up. The kits include power steering, alternator, and idler brackets—all CNC laser-cut from 6061 aircraft grade billet aluminum and protected with an anodized finish. These engine accessory kits must be used with a GM LS truck-style balancer, alternator, water pump, and power steering pump. Summit Racing™ recommends using an 84 in., 6-rib serpentine belt.
( 3 )
$100.99
Summit Racing™ Billet LS Rocker Stands
Strengthen your valvetrain using Summit Racing™ billet LS rocker stands. Our bars are stouter than factory, and are precision-cut from billet aluminum, helping to limit flex and distortion. Get assistance with rocker arm control; choose a set of Summit Racing™ LS rocker stands for your valvetrain.
( 6 )
$102.99
Summit Racing™ Pro LS Race Valve Covers
Summit Racing™ Pro LS Race valve covers are designed for maximum effort applications. They are built tall to clear all types of rocker arm systems including adjustable shaft mounts. Made from cast aluminum for light weight and strength, they include -12 AN vent/ fill locations for catch can or vacuum pump plumbing and utilize built-in baffles to resist oil consumption through the vent or PCV. The valve covers are available in various colors and versions, with or without coil brackets. Select the Summit Racing™ Pro LS Race valve covers for your application needs. Features and benefits: * Available in black, red, or bare aluminum * Special profile clears shaft rockers * Oil fill cap and -12 AN plug included * Available plain and with coil mounts * Uses stock bolts and grommets (not included) * Uses stock gaskets (not included)
( 3 )
$249.99
Summit Racing™ Pro LS Oil pumps
Like all our premium Pro LS products these Summit Racing™ Pro LS oil pumps are what you need for maximum performance and reliability from your LS engine. Available in standard volume +10 percent and high-volume +18 percent versions, these pumps produce more gpm (gallons per minute) than OEM pumps. They also feature an O-ring seal between the pump outlet and block which helps prevent high-rpm pressure loss and oil aeration. They include both early and late pickup tube O-rings and come with two different thicknesses of shims, if you feel the need to bump up the pressure relief points. Don't take chances on your next LS build, choose a Summit™ Pro LS oil pump. Additional features: * Low porosity aluminum main body * Steel thrust cover plate * O-ring seal of pump to engine block * Optional oil pressure spring shims supplied +8 and +10lb. * Steel alloy gear set at STD .420 in. or HV .510in. thickness * Chrome nickel multi-tempered oil pressure control spring * Assembled by hand in USA with foreign and domestic parts -- All specifications exceed OEM standards
Not Yet Reviewed
$144.99
—
$201.99
Summit Racing™ Pro LS Heater Hose Kits
Summit Racing™ Pro LS heater hose kits are ideal choices for neatly routing heater hoses when LS swapping your ride. These heater hose kits include everything needed to route the heater hoses above the headers and back to the firewall, providing a clean, professional look under the hood. Kit includes: * Hose brackets and mounts * Stainless hardware for brackets * 5 ft. long heater hoses 5/8 in. and 3/4 in. * Heat shrink hose clamps
Not Yet Reviewed
$184.11
Summit Racing™ LS Swap Motor Mount Kits
Summit Racing™ LS swap motor mount kits will make transplanting your Gen III/IV LS easier and more secure. These kits will provide the support needed, as well as confidence in knowing their fit and function will make your project a success.
( 15 )
$226.99
—
$232.99
Summit Racing™ Pro LS Main Cap Pullers
Summit Racing™ Pro LS main cap pullers are built to quickly pull off main bearing caps from GM LS Series V8 engines, especially those with main studs. The tool's design allows you to remove caps in one easy motion, saving time and hassle. If you're in an automotive shop that regularly works on high performance GM engines, a Summit Racing™ Pro LS main cap puller is a must-have.
( 8 )
$205.99
Summit Racing™ LS Lifter Valley Covers
Summit Racing™ LS lifter valley covers are race-ready! Manufactured from 1/4 in. thick billet aluminum or cast aluminum. They are available in a plain, polished, black anodized, or copper finish for both gen 3 and 4 versions. Plus, they're etched with the Summit Racing™ logo for a high-tech look! Replace that factory cover with Summit Racing™ LS lifter valley covers.
( 23 )
$129.99
—
$180.99
Summit Racing™ LS Turbo Header Flanges
Summit Racing™ turbo header flanges give you a great starting point when fabricating a set of custom turbo headers for your ride. These flanges are cast from 304 stainless steel and then milled flat for a consistent seal on the header gasket, unlike laser-cut flanges that often have some warping. The 1/2 in. thickness provides enough rigidity and strength to support the weight of long tube headers and turbos. The port openings are counterbored for the tube diameter to locate and simplify the welding and smooth the transition into the tube without interfering with the gasket surface. Select the size needed. Check out these features below: * 1/2 in. thick 304 stainless steel flanges provide enough strength/rigidity to support the weight of long-tube headers or turbo manifolds * The ports and bolt holes are CNC-machined for a perfect fit on all Gen 3 and 4 LS-based engines * Available in 1.75, 1.875, 2.0 in. sizes * The flanges are milled flat for a consistent seal on the header gasket * The flange ports have a counterbore to locate the primary tubes and simplify header assembly. This counterbore also allows for easier access to weld the tubes internally while maintaining a smooth transition from the exhaust flange
Not Yet Reviewed
$189.99
Summit Racing™ Pro LS Wrist Pins
Summit Racing™ Pro LS wrist pins are the toughest on the market—powerfully built for extreme boost and nitrous. They're specifically developed for Summit Racing™ Pro LS pistons and others that use a 2.250 in. pin length for Spiralocks to clear the reluctor ring without notching. Make no mistake, during high-contact stress and impact loading applications, you'll want the confidence that Summit Racing™ Pro LS wrist pins provide! * Part number SUM-S719 is made from H-13 tool steel, an alloy with 289,000 psi tensile strength (vs. common 9310 alloy tool steel pins at 187,000 psi) * Part number SUM-S720 adds diamond-like coating (DLC) to the H-13 tool steel for increased durability, hardness and much lower friction * The DLC wrist pins (SUM-S720) provide better lubricity for use with low-silicon 2618 alloy pistons that may have pin-bore galling issues at the extremes without DLC * H-13 tempers at 1,000 degrees F and readily accepts DLC application (at 400 F) without structural changes * Rockwell hardness: 54 HRC * Increased ductility of 30,500 ksi compared to other materials * Surface-finished to an RA of less than 1 and a concentricity of .000040 in. * 0.215 in. wall-thickness—the thickest on the market for ultimate strength * Only 135 grams * I.D. honed to remove stress-risers
( 4 )
$117.99
Summit Racing™ Bracket Racer SFI Harmonic Dampers
You don't have to sacrifice safety or quality to save money; our affordable Summit Racing™ bracket racer SFI dampers have been spin-tested to 12,500 rpm and carry an SFI-18.1 rating. The carbon steel dampers have an injection-molded and bonded elastomer, easy-to-read engraved timing marks, removable counterweights (where applicable), and a highly polished baked-enamel finish, so they look as good as they perform.
( 392 )
$194.99
—
$237.99
Summit Racing™ Performance LS7 Hydraulic Lifters
Summit Racing™ Performance LS7 hydraulic roller lifters are a definite upgrade over stock originals. Designed for high horsepower engines that demand increased oiling and higher-rpm capabilities, these replacement lifters will fit in SBC roller engines, as well as LS-based engines without active fuel management (AFM/DOD). Beat the competition to the finish line with Summit Racing™ Performance LS7 hydraulic lifters!
( 21 )
$204.99
