Availability
Summit Racing™ torque converter lockup kits are a simple way to control converter clutch lockup in 4th gear when swapping a GM 700R4 or 200-4R transmission in an early non-computer controlled vehicle. The adjustable vacuum switch will hold the clutch on during steady state cruising and disengage when accelerating or downshifting. Summit Racing™ torque converter lockup kits are available in automatic (+12V applied via vacuum switch) and manual (+12V applied via toggle switch) versions. Choose the one preferred for your application.
( 6 )
$149.99
Summit Racing™ offers weatherstrip seals for a wide range of vehicles, including many classic cars and trucks from the 1950s, '60s, '70s, and '80s. The multi-piece kits include moldings for a variety of positions. They're made from quality materials, such as original felt, and designed to factory specs to ensure a tight fit and leak-free seal. Order the weatherstrips designed for your application.
( 7 )
$103.99
—
$216.99
Summit Racing™ Direct-Fit Restoration exterior door handles will provide a finished look you can be proud of. Made with quality materials and finishes, our exterior door handles are available to restore one of the most used pieces on the door of your vehicle. Complete your classic's aesthetics with the Summit Racing™ Direct-Fit Restoration exterior door handle reproduced for your vehicle.
( 5 )
$105.99
On Sale
Summit Racing™ offers reproduction wiring harnesses for a wide selection of vehicles, particularly classic cars and trucks from the 1960s and '70s. These replacements and/or extensions are used to power a variety of applications—including horn, glove box, console, backup lights, engine; forward, hood, and courtesy lamps; fuel tank sender, and more. These OE style replacement harnesses are made of high-quality Automotive Grade Wire using factory style fuse blocks, plug ends, and wire colors to ensure factory type fit, performance, and durability. For repair or restoration, order the harness recommended for your specific car or truck. Note: These harnesses are factory replacements and do not include instructions or wiring diagrams refer to the factory diagrams and or service manuals for your specific vehicle.
( 52 )
$258.99
$159.99
—
$243.99
Summit Racing™ Electronic Distributor Conversion kits allow you to Convert your factory single point distributor to a true 1 wire solid state ignition. Simply remove and replace your points and condenser with the solid state breakerless ignition module. Simple stealth 1 wire hookup is perfect for 100 point type restorations as it is undetectable. Never deal with breakdowns or adjusting worn or burned points again with a Summit Racing™ Electronic Distributor Conversion kit. • 1 Wire Hook-Up, just connect to the original points wire • Completely stock appearing • Fits inside 57-74 Delco Window cap distributors • Auto-standby prevents coil damage or dead battery if the ignition is accidentally left on • Active dwell control maintains high rpm spark energy while reducing coil heating at idle. • Hall effect rotary-vane sensor design compensates for worn bearings and distributor end play. • Magnetic sensor is unaffected by oil, dirt or other contaminants, unlike optical systems. • Over-voltage/over-current protected against damage from high amp battery chargers, reversed battery, or improper wiring • No distributor modification, disassembly, or removal is required , use SUM-RP20594 For New Repl. Black Ground Wire To Finish The Conversion.
( 13 )
$167.99
Summit Racing™ billet electronic Mopar distributor conversion kits are complete high performance packages that will convert your old point-type ignition to a new electronic ignition. Summit Racing™ kits are made entirely from new, not rebuilt components. Kits include: * OE style magnetic pickup-type distributor with mechanical and vacuum advance * Electronic control unit (Blue Box), wiring harness, and ballast resistor * Black female socket-type distributor cap
( 42 )
$230.99
—
$239.99
These Summit Racing™ Manufacturing piston ring filers give you a repeatable, precision gap every time. An adjustable ring position locator and fixed front stop keep the position of the rings consistent for the entire set. They also feature a large easy-to-turn handle that's convertible to left hand operation, a high-quality diamond abrasive wheel, and a corrosion-resistant finish.
( 35 )
$172.99
Our Summit Racing™ X-pipes are an affordable way to open up your exhaust system and add power to your vehicle. They feature mandrel-bent tubing to reduce backpressure. These X-pipes do not include catalytic converters and are for off-road use only.
( 81 )
$100.99
—
$149.99
Summit Racing™ fuel surge tanks and kits are a simple solution to upgrade your fuel delivery system when installing power adders or converting to EFI. The surge tank is filled with fuel from your stock mechanical pump or in-tank electric pump; and then the high-output pump(s) take over and feed the engine what it needs from the surge tank to make big, reliable power without the risk of starvation. These kits are available in various styles and pump options; choose the model that best fits your application.
Not Yet Reviewed
$248.99
On Sale
Summit Racing™ swing-out door bar kits will enable you to convert an existing side bar to a more convenient swing-out model—no more crawling over the bars to get into your race car! Once installed, these kits allow your door bar to conveniently swing-out of the way with the removal of a quick-release pin. The door bar kits are designed for mild steel tubing of different diameters. Release pin included. Welding required. Order the kit you need.
( 5 )
$133.99
Summit Racing™ billet electronic Mopar distributors convert your old points ignition to a new modern electronic breaker-less system. These distributors offer these benefits: improved timing and dwell control; higher energy at the spark plug for easier starting; improved throttle response; extended RPM range; and better efficiency, along with increased spark plug life. The distributor bodies are CNC-machined from forged 6061-T6 aircraft-grade aluminum and come with a glass fiber reinforced (PBT) tan cap (which is patterned after the OEM dual point cap)—with extra internal voltage dams that help to prevent crossfire while resisting carbon tracking. The shafts are centerless ground and ride on both upper and lower sealed roller bearings for smooth operation at high RPM's and extended service life. The cap contacts and rotor blade are brass and the rotor spring is stainless steel, all for long-term maximum conductivity.
( 18 )
$194.99
If you're looking to convert over to LED headlights in your classic car or truck, Summit Racing™ direct-fit LED Headlights bulbs will help you see the light. Available with options that include sealed or unsealed, round or rectangular, and single or dual-beam capabilities, you're sure to find what you're looking for. Add some modern capabilities to your favorite ride with the Summit Racing™ direct-fit LED headlights best suited for your application.
( 82 )
$189.99
—
$199.99
Summit Racing™ Mopar electronic distributor conversion kits are complete high performance packages that will convert your old point-type ignition to a new electronic ignition. Summit Racing™ kits are made entirely from new, not rebuilt components. Kits include: * OE style magnetic pickup-type distributor with mechanical and vacuum advance * Electronic control unit (Blue Box) re-engineered to 5,900 RPM, wiring harness, and ballast resistor * Black female socket-type distributor cap
( 1 )
$190.99
Summit Racing™ resonator delete pipe kits give your Mustang a more aggressive exhaust note and increase horsepower and torque. These kits are an affordable way to replace the restrictive factory mid-pipe resonator on your 2015-later Mustang to reduce back pressure and increase exhaust flow. They also weigh less than the factory resonator and are fairly easy to install. Summit Racing™ delete pipe kits are available with "X" or "H" pipe designs in mild or stainless steel. Kits install after the factory catalytic converters and clamp in place after removal of the resonator.
( 30 )
$190.99
—
$217.99
Summit Racing™ adjustable clutch cable and quadrant kits adjust your clutch pedal travel to respond better to your individual driving habits. The kits contain all parts necessary to convert your stock adjustable clutch to a more versatile adjustable style.
( 30 )
$104.31
—
$131.60
Summit Racing™ Hi-Performance Synthetic ATF is a full synthetic fluid designed for all cars, trucks, and performance applications that require a fully formulated low viscosity ATF. Blended with performance vehicles in mind, it provides exceptional performance and protection while improving shift quality and feel, preventing and eliminating torque converter shudder, and it imparts excellent torque carrying capacity which extends clutch, band, and component life. Available in different sizes and quantities, select the amount(s) of automatic transmission fluid to best suit your needs. Check out these features and benefits: * World class replacement for synthetic low viscosity ATF. Check out our full compatibility listing below. * Backward compatible to replace DEXRON fluids in older automatic transmissions that call for DEXRON, as well as Honda applications that call for Z-1 ATF * Seal and O-ring friendly technology restores seal flexibility and performance to older and high mileage transmissions. * Formulated to meet OEM requirements for superior shift quality and anti-shudder properties. * Unique technology provides excellent wear protection with improved frictional and shear stability (high film strength for the life of the fluid). * Suitable for use with dozens of different ATFs
( 1 )
$110.99
Summit Racing™ flexplate dust covers are manufactured from high-quality steel and are available in your choice of finishes. They allow for easy access to the torque converter area and prevent debris from entering your transmission's bellhousing.
( 349 )
$129.99
Summit Racing™ offers Extreme Performance coated brake rotors for thousands of vehicles, from the 1960s and up. They're manufactured on CNC machines using CAD-CAM design for perfect balance and alignment, then coated with silver zinc to resist corrosion. These rotors provide you with maximum stopping power, reduced warping, and longer life. The cross-drilled holes and slots provide an exit route for gasses and dust, resulting in better heat dissipation and less brake fade under hard use. Other solid-surface rotors allow gasses to create a cushion between the pad and the brake rotor, resulting in poor brake performance. The cross-drilled holes and slots clear away harmful gasses, restoring full pad-to-rotor contact. These coated rotors are a terrific performance upgrade when replacing your brakes. Order the model recommended for fitment on your vehicle.
( 68 )
$101.98
—
$219.98
From low-end torque to top-end horsepower--and everything in between--one of our Summit Racing™ classic cams has you covered. Assembly lube is included.
( 334 )
$131.99
—
$160.99
Summit Racing™ offers drag race shocks and struts for countless vehicles from the 1950s and up. They're available in a variety of styles for front and rear applications—including 90/10, 70/30, and 50/50. A 70/30 strut extends faster than it contracts, meaning faster front-end lift but longer to settle back down. 90/10's will lift your front-end very fast and settle it back down slowly, keeping the weight transferred to the rear tires much longer than the 50/50 models. Order the drag shocks and struts recommended for your racer.
( 11 )
$140.99
Summit Racing™ frame brace kits are designed to easily install and strengthen the factory frame of your classic car or truck. The benefit of stiffening the frame is improved handling and a tight predictable feel. Reinforce your chassis and create a custom pro touring style, corner carving ride with these Summit Racing™ frame brace kits. *Constructed From DOM tubing *Computer Designed, Machined, and Bent *Welding Required for most kits *Adjustable transmission crossmember for Manuals or overdrives included *Generous openings for Dual Exhaust pipe routing *Exhaust hangers provided
( 68 )
$199.99
On Sale
Buick, Chevy, Chrysler, or Dodge—whatever type of vehicle you drive, Summit Racing™ has just the right suspension components, including these loaded strut assemblies. They're application-engineered to your vehicle's unique riding and handling characteristics for better suspension performance. Hundreds of models are available, for fitment on vehicles from the 1980s and up. Summit Racing™ loaded strut assembly features: * Twin-tube, nitrogen-charged design for better performance * Consistent robotic TIG welds * High-range -45 to +450 degree grease applied to all bearings * Strut rod nuts are torqued to OE specs and retain the OE spring compression * Phosphate finished and painted for corrosion resistance * Chrome plated pistons for added life * Neoprene strut boots included * Rubber seat and bumper meet or exceed OEM specifications * High-quality NOK seals * Every unit is put through a 300,000-cycle durability test
( 274 )
$105.99
—
$202.99
Summit Racing™ 5-layer custom car covers are available to shelter a range of vehicles from classic and modern muscle cars to Jr. Dragsters and Teslas. Featuring all-weather fabric for indoor and outdoor use, our covers have a multi-layer, non-woven construction with a polypropylene outer, an inner moisture barrier, and a soft Spunlace inside lining to protect fine paint finishes. Choose the proper fit for your vehicle from the Summit Racing™ 5-layer custom car cover selection available. Additional features: * Excellent protection in all climate conditions * Sewn in the USA with the highest quality standards * Increased strength and dust protection * Ding protection, high UV protection, and excellent moisture resistance
( 23 )
$241.99
Summit Racing™ offers direct-fit door sill plates for a wide range of vehicles from the 1950s, '60s, '70s, and '80s. The door jamb step plates are machined from quality materials with a clear anodized finish for protection and are identical to the factory originals, including the engraved or riveted logo emblems. Door sill plates take a lot of abuse, with driver and passengers getting in and out of their vehicle. Now you can replace these highly visible components economically with quality reproduction parts from Summit Racing™. Order the model designed for your vehicle application.
( 8 )
$195.99
—
$199.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
