Availability
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 47 )
$204.99
—
$379.99
$199.99
—
$339.99
On Sale
Think you have to scour the local bone yards to find a decent set of GM's old double hump or fuelie cylinder head castings? Not true. In fact, we've brought back classic Chevy performance in a big way with these ready-to-run heads for small block Chevy. Our versions of the popular GM cylinder heads offer great performance for less than it would cost to rebuild an old set of double hump castings.
( 125 )
$649.99
$599.99
On Sale
Summit Racing™ flexplate dust covers are manufactured from high-quality steel and are available in your choice of finishes. They allow for easy access to the torque converter area and prevent debris from entering your transmission's bellhousing.
( 342 )
$43.99
—
$50.99
$41.99
—
$46.99
On Sale
Deliver power-building airflow to your engine with Summit Racing™ Vortec cast iron cylinder heads. These heads outflow the early model small Chevy heads with wide-open intake runners, efficient combustion chambers, and a high-performance valve job. They are made from a strong cast iron alloy that makes them less brittle than comparable Vortec heads on the market. For performance and great value, select the Summit Racing™ Vortec cast iron cylinder heads preferred for your build.
( 74 )
$649.99
$599.99
On Sale
Easily lift your engine with one of these Summit Racing™ engine slings. The nylon strap design prevents damage to valve covers, intakes, or any other engine accessory when lifting. The 24 in. straps allow the sling to clear most intake setups. Simply attach the four strap mounting tabs to the engine block and use a traditional engine hoist to safely support your engine during removal and installation.
( 38 )
$112.99
$101.69
On Sale
Summit Racing™ swing-out door bar kits will enable you to convert an existing side bar to a more convenient swing-out model—no more crawling over the bars to get into your race car! Once installed, these kits allow your door bar to conveniently swing-out of the way with the removal of a quick-release pin. The door bar kits are designed for mild steel tubing of different diameters. Release pin included. Welding required. Order the kit you need.
( 5 )
$133.99
$99.99
On Sale
Summit Racing™ double-adjustable ladder bar kits are built for strength, consistency, and ease of adjustment. Fabricated from 1 in. diameter DOM tubing, these 32 in. bars come complete with all hardware--including 3/4 in. heims--and use a large 3/4 in. front bolt. The double-adjustable link allows you to make quick pinion angle and preload adjustments without removing the bars from the car. Easy to install and simple to adjust, nothing hits the tires like a Summit Racing™ double-adjustable ladder bar suspension. Installation by a certified welder is recommended. Additional product details: * Durable black powdercoat finish * Rod end safety loops included * 3/4 in. rod ends, adjusters, jam nuts, and Grade 8 hardware * 3/16 in. weld-on housing brackets * Set up for 32 in. from center of housing to center of rod end
( 2 )
$329.99
$296.99
On Sale
We want you to have reusable filter elements that outflow ordinary paper filters, without spending an arm and a leg. Summit Racing™ reusable air filter elements utilize quality materials and have oil already applied. They're available in dozens of sizes, shapes, and styles—and are a terrific value.
( 229 )
$50.99
—
$57.99
$39.99
—
$50.99
On Sale
Give your battery extra protection and reduce underhood clutter with Summit Racing™ rugged fabricated aluminum battery boxes. Fabricated aluminum boxes feature a sealed design with an external vent tube. They come complete with hold-downs, hold-down brackets, and high grade nuts.
( 51 )
$161.99
—
$190.99
$143.99
—
$169.99
On Sale
Summit Racing™ fuel pump and regulator Pro Packs consist of proven performance fuel pumps and regulators. Just select your brand, flow rate, and pressure requirements, and one part number gets you everything. We've even included a relay kit with the electric fuel pump combos. Economical and convenient, Pro Packs are available for virtually any application from the 1950s and up.
( 60 )
$271.94
—
$280.90
$200.90
—
$211.94
On Sale
Summit Racing™ offers dead-blow hammers for use by body shops, metal fabricators, woodworkers, machinists, and other trades. The polyurethane mallets are available in different weights, handle lengths, and head styles. Dead-blow hammers provide a balanced swing to effectively complete your tasks.
( 63 )
$21.99
—
$34.99
$18.69
—
$29.74
On Sale
A properly fabricated intake manifold can produce significant gains in your engine's performance. Add one of our Summit Racing™ fabricated intake manifolds to your engine combination to make more power! Each of these stock/OEM deck engine block style intake manifolds is manufactured to exacting standards utilizing the latest CNC machining and fabricating equipment. Simply find and order a perfect fit for your specific make and model vehicle.
( 31 )
$349.99
—
$469.99
$249.99
—
$369.99
On Sale
Ensure your drinks and food are cold no matter where your adventure takes with you with Summit Racing™ portable refrigerators/freezers. Each fridge-freezer model features a high efficiency DC inverter compressor and conversion module for high reliability, long life, and a wide range electronic temperature control. A fluoride-free insulation is used for good heat preservation performance and low energy consumption. The 12/24V DC and 110VAC power supplies allow use in both the car and at home. The Summit Racing™ portable refrigerator/freezers also feature an intelligent car battery protection system and compressor delay protection for worry-free operation.
( 30 )
$240.99
—
$320.99
$199.99
—
$299.99
On Sale
With Summit Racing™ tubular rear trailing arms you get heavy-duty tubular steel construction, which is lighter weight but adds stability and strength, a durable black powdercoat finish, and long-lasting polyurethane bushings. Our tubular rear trailing arms offer a great alternative to rusty old stamped factory arms.
Not Yet Reviewed
$519.99
$479.99
On Sale
Summit Racing™ OEM LS valve covers make a great choice to service and maintain your vehicle's LS engine. They are made from premium materials to OEM specifications for proper fit and performance, as well as good looks under the hood. Choose the replacement valve covers for your application.
( 5 )
$59.99
—
$80.99
$57.99
—
$76.99
On Sale
Summit Racing™ forged crankshafts offer maximum strength and the best value for your dollar! Our crankshafts are non-twist forged from certified 4340 steel. They are put through several stages of heat-treatment, and then stress-relieved and shot-peened to provide the strength and reliability you demand for your high performance application. Each journal is micro-polished and a .125 in. radius is used for increased strength. Summit Racing™ forged crankshafts help you get the most in value and performance.
( 10 )
$889.99
—
$1,029.99
$849.99
—
$949.99
On Sale
Ensure your drinks and food are cold no matter where your adventure takes with you with Summit Racing™ battery backup portable refrigerators/freezers. Each fridge-freezer model features a high efficiency LG Brand DC inverter compressor and conversion module for high reliability, long life, and a wide range electronic temperature control. A fluoride-free insulation is used for good heat preservation performance and low energy consumption. The 12/24 V DC and 110 V AC power supplies allow use in both the car and at home. Summit Racing™ battery backup portable refrigerator/freezers also feature an intelligent car battery protection system and compressor delay protection for worry-free operation. Product features: * 15600mah capacity removable battery * Solar charging port * Telescoping handle * Cutting board included * Reversible door can be used on either side * Rugged wheels * Less than 45 dB noise level for quiet operation * Integrated cup holders and bottle opener * Estimated 4 to 8 hour run time depending upon ambient temperature, setting, and how often the door is opened
( 2 )
$501.99
$449.99
On Sale
Replace your old and generic looking valve covers with a new pair of Pro LS valve covers from Summit Racing Equipment®. These cast aluminum valve covers are available in a variety of styles, height profiles, and finishes to dress up your engine bay.
( 33 )
$238.99
$214.99
On Sale
Our Summit Racing™ cast aluminum intakes are the perfect performance upgrades for your engine. The dual plane carbureted manifolds feature a runner design to deliver improved power. They're available in a variety of sizes, RPM ranges, and finishes. Order the model recommended for your vehicle application.
( 49 )
$328.99
—
$340.99
$228.99
—
$240.99
On Sale
Summit Racing™ precision measurement tools and fixtures are designed for engine building professionals looking for value. Gauging accuracy, action, and repeatability are the key to building a good engine that holds together. When you get serious about your engine-building, our Summit™ tools are the ones you can trust.
( 2 )
$399.99
$349.99
On Sale
These Summit Racing™ torque wrenches feature a click-style mechanism that will accurately measure foot-pounds of torque. They use a ball-bearing mounted handle with a slide collar for calibration.
( 93 )
$29.99
$24.99
On Sale
Summit Racing™ intake manifold and installation Pro Packs are now all in one part number. With Summit Racing™ intake manifold and installation Pro Packs, you can get your satin-finished, square-bore intake, plus all of the installation items that you need to finish the job, and save time and money! These Pro Packs also include Loctite black RTV sealant.
( 42 )
$509.85
$364.85
On Sale
Summit Racing™ professional flaring tools enable you to conquer a variety of different plumbing jobs—including brake lines, transmission cooler lines, and fuel lines! These tools are designed to easily form 37 or 45 degree double, single, and bubble flares in OE steel, stainless steel, and soft metal tubing. All of the brake-flaring forming dies are mounted right on the turret, so there's no fumbling around for small parts or worry about missing dies. Their 'turret-style' design allows you to make precision flares in record time, and they can be used with 3/16 in., 1/4 in., 5/16 in., and 3/8 in. diameter lines. The T-handle screw clamp secures your line in place while forming. Fabricating hard lines begins with serious tools—Summit Racing™ professional flaring tools! Order the model that forms the angles you need.
( 12 )
$249.99
$189.99
On Sale
These Summit Racing™ folding work tables fold to approximately 4 in. from the wall but open up to give you about 6 sq. ft. of work space. They lock securely in place, have a 100 lb. working capacity, and come with 2 sets of mounting buttons.
( 14 )
$212.99
$189.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
