Availability
Summit Racing™ offers convertible top switches for a wide range of vehicles—including 1950s and '60s models from Chevrolet. These high-quality replacements facilitate the ups-and-downs of your convertible top operation. They're designed to meet all OEM specifications and install in the stock location. Order the switch recommended for your application.
( 1 )
$94.99
Our Summit Racing™ battery cables are great for installing a battery in your trunk for better weight transfer or a cleaner engine compartment. The cable kits comes with battery cables and hardware.
( 84 )
$65.99
—
$120.99
Summit Racing™ battery Pro Packs combo an Optima RedTop battery, Painless battery cable kit, and a tray/hold-down kit for a complete install in your vehicle. The high performance AGM RedTop is Optima's ultimate starting battery designed to deliver a strong burst of ignition power for a reliable start-up every time. The batteries offer longer life, more vibration resistance, no maintenance, and are virtually spill proof and mountable in most any position. Painless Performance battery cable kits include a red 1-gauge positive and a black 1-gauge negative cable with lightweight abrasion-resistant insulation capable of handling over 250 amps and heavy-duty terminals already installed, side post adapters, and high-amp crimp ring terminals. Their 16 ft. length make them ideal for trunk-mounted batteries and custom installs. The battery tray/hold-downs are made from premium aluminum and chosen to match the battery in the Summit Racing™ Pro Pack selected.
Not Yet Reviewed
$530.97
Summit Racing™ offers power window switches for a wide selection of vehicles, particularly classic cars from the 1960s and '70s. These high-quality replacements facilitate the ups-and-downs of window operation. Available in single, dual, and quad styles, the switches are designed to meet all OEM specifications and install in the stock location. Order the model recommended for your application.
( 12 )
$68.99
Keep battery posts and cables well-protected with Summit Racing™ battery terminal covers. These boots are used for battery connections and terminals as an extra measure of safety. They're designed to insulate and shield a battery from corrosion, as well as accidental shorts. These rubber covers come in black and red to make them easily identifiable and to help eliminate any installation errors.
Not Yet Reviewed
$5.99
Summit Racing™ Our Direct Fit Chevrolet and GMC Truck Reproduction Battery Cables are Made In The USA using the original GM specifications to insure a perfect fit. All of our battery cables are upgraded with High Performance Cross-Linked Polyethylene type insulation rated at 125C and are nearly impervious to oils, fuels, chemicals and typical engine temperatures unlike the PVC insulation type cables used during production. They are guaranteed to fit and outlast your OEM battery cables. They include any factory installed convoluted conduits, looms, insulating sleeves, mounting clamps, correct size side post bolt hex head on the battery terminals and appropriate angled ring terminals for that perfect routing and fit. Our battery cables are not service type assemblies designed to replace the factory installed cables. They are built to match the original cables GM installed when the trucks were new. The molded-on insulator on the side-post battery terminal end of the cables are molded in Red for positive and Black for negatives to original GM standards using upgraded Thermoplastic Elastomer components instead of PVC for long life. Truly the finest battery cables available.
( 8 )
$71.99
—
$107.99
Summit Racing™ offers reproduction wiring harnesses for a wide selection of vehicles, particularly classic cars and trucks from the 1960s and '70s. These replacements and/or extensions are used to power a variety of applications—including horn, glove box, console, backup lights, engine; forward, hood, and courtesy lamps; fuel tank sender, and more. These OE style replacement harnesses are made of high-quality Automotive Grade Wire using factory style fuse blocks, plug ends, and wire colors to ensure factory type fit, performance, and durability. For repair or restoration, order the harness recommended for your specific car or truck. Note: These harnesses are factory replacements and do not include instructions or wiring diagrams refer to the factory diagrams and or service manuals for your specific vehicle.
( 49 )
$17.99
—
$397.99
Summit Racing™ reproduction battery cables are perfect suited for your restoration project. Replicas of the original cables, they provide the correct fit, style, and performance to make your restoration a success.
Not Yet Reviewed
$71.99
Summit Racing Equipment® offers braided battery straps for a variety of applications, including Chevy Corvette models from the 1960s, '70s, and '80s. These direct-fit assembled spring ring cable replacements have a protective plastic jacket and are available for positive and negative terminals, and top-mount or side-mount batteries.
Not Yet Reviewed
$76.99
Plain-Jane is out; stylish and functional Summit Racing™ billet universal battery mounts are in! Our compact billet aluminum battery trays provide a great, secure way to mount your battery in any car, truck, boat, or even UTV. Planning to use Summit Racing™ billet battery mounts with an Optima battery or a battery with the same physical dimensions? The included clear anodized billet stanchion tubes can be used for a more cosmetically pleasing finished look and if your battery is shorter, you can cut the stanchions down to accommodate. Kit includes: * Clear anodized billet base plate * Three 3/4 in. diameter x 6.375 in. long clear anodized billet stanchion tubes * Six 3/8 in. serrated lock nuts * Three 3/8 in.-16 x 8 in. all-thread * Black anodized billet top plate etched with the Summit Racing Equipment® logo
( 5 )
$90.99
Why buy a plain-Jane battery mount when our Summit Racing™ aluminum battery mounts will secure your Optima red-top battery almost anywhere? These battery mounts are perfect for street rods, muscle cars, trucks, and show cars. They feature a ball-milled top for a distinct look to set your ride apart from the rest. The stylish battery hold-downs are available in a polished or black anodized finish.
( 42 )
$140.99
—
$141.99
Our Summit Racing™ 8.5mm ignition wire rolls allow you to custom-make spark plug wire sets or will come in handy when you're building multiple wire sets. The 8.5mm bulk wire features a spiral-wound copper conductor with extremely low resistance (just 40-50 ohms/ft.), combined with excellent EMI suppression. The wire also features a high dielectric strength insulator and heavy glass braid, topped with a heavy-duty black silicone jacket to resist heat and abrasion.
( 5 )
$49.99
Our Summit Racing™ coil wires feature spiral-wound copper conductors for low resistance, a high dielectric strength insulator, and heavy glass braid topped with black silicone jackets and boots. The 8.5mm coil wires feature installed male/HEI terminals and boots.
( 2 )
$13.99
Summit Racing™ offers GM high-energy modules with rev limiters that enable you to adjust the rpm limit from 5,000 to 9,500 rpm. They are high performance modules built for HEI distributors, producing 50 percent higher coil drive currents than the stock module. This saturates the coil faster, delivering more spark energy at top speeds. Your benefits are increased horsepower and rpm range, plus improved starting. GM HEI modules replace all 4-pin modules used in HEI distributors with a vacuum advance canister. They can be used with factory or aftermarket HEI distributors.
( 4 )
$130.99
Summit Racing™ offers cargo lamp switches for a wide range of Chevrolet and GMC trucks from the 1960s, '70s, and '80s. Many pickups have a cargo lamp mounted near the top of the cab above the rear window, lighting the truck bed for better visibility. These spade terminal-type replacements are made from plastic/metal and conform to stock specifications. Order the model recommended for your vehicle.
Not Yet Reviewed
$20.99
—
$30.99
Summit Racing™ LS coil brackets allow you to mount your coil packs in the OEM location on top of the valve covers. These brackets and made from high quality materials and finished to protect against harsh under-hood conditions like high heat and corrosion.
( 8 )
$40.99
—
$49.99
These Summit Racing™ flip-up toggle switch covers will go over the top of your standard toggle switch. They make sure you do not hit a switch by accident, while providing a fast, easy shut-off design.
Not Yet Reviewed
$7.99
Since you're installing that new distributor, you'll need Summit Racing™ hold down clamps. Dress up your engine compartment while securing your distributor. Made from top-quality materials, they're the perfect way to dress up your engine compartment.
( 103 )
$8.99
—
$28.99
Got some wiring to do? Let us supply the wire. Designed for chassis wiring jobs, our Summit Racing™ accessory wire isn't run-of-the-mill stuff like you'd find in your local hardware store. It's high-quality automotive wire with a stranded-copper core. It resists grease, oil, acids, and diesel fumes, and meets SAE Type GPT automotive specs. To fit your needs and give your handiwork a professional look, this top-notch wire is available in a wide variety of gauges and colors. Make sure it's part of your project.
( 70 )
$11.99
—
$40.99
Get going with Summit Racing™ Performance starter solenoids. These solenoids are ideal for use with high-torque racing starters. They mount easily with a flat base and can easily adapt to a timing light hookup or remote underhood starter switch. Summit Racing™ Performance starter solenoids are made using top-quality materials, ensuring excellent performance for your competition vehicle!
( 16 )
$11.99
Summit Racing™ offers numerous data acquisition components help you identify, measure, and log a variety of sensor outputs for your engine, driveline, and suspension. Whether for replacement or upgrade, these parts are made from top-quality materials and factory-type specifications to ensure a proper fit and optimum performance. Technology advancements in the auto industry supply an increasing amount of information to drivers in order to direct maintenance decisions and facilitate a smooth, efficient ride. Order the part needed to collect the data for your vehicle.
Not Yet Reviewed
$99.99
We've taken our original Ready-to-Run billet distributors and upped the ante with our Summit Racing™ Digital RTR (Ready-to-Run) Plus billet distributors. They now feature a digital module with a 7.5 amp rated dwell control circuit for maximum energy output. They deliver 400 volts and 125mJ of spark energy to the coil and upwards of 50,000 volts from the coil to the spark plugs. We've also added a single-stage rev limiter with a simple "tap to ground" process of the tachometer lead attached to the module to set the limiter. The tachometer dual purpose lead also produces a 25 percent duty cycle, square wave signal, so it can be used with multifunction tachometers and most popular aftermarket EFI systems. Another bonus feature of our digital technology is a fully automatic start retard. This built-in feature provides 4 degrees of timing retard during cranking and is fully dialed out by 300 rpm. This gives you easier and quicker hot restarts while lowering the initial start load on the starter and electrical system. With all these upgraded features, you're assured of peak output throughout all RPM ranges, quicker hot starts, EFI capability and the reliability of digital technology. The distributors still have the same lightweight, forged, precision CNC-machined aluminum housing for strength and stability; polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm; and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. All distributors come with a high-quality, 30 percent glass-filled PBT cap and rotor with brass terminals and contacts. An ignition box is not required for use with Summit Racing™ Digital RTR Plus billet distributors except when used with an aftermarket EFI system. Select the model recommended for your car, truck, or van.
( 4 )
$299.99
—
$499.99
Your Ford is built to eat asphalt and clear its pipes with compacts. Summit Racing™ Ford Mod Motor coil-on-plug ignition coils are engineered to fuel the powerful combustion needed to unleash its inner potential. We use pure copper wire, rare earth magnets, and a custom primary and secondary wind, to provide 40 percent more voltage and 20 percent more energy (mj) from a stock-sized coil housing. They fit in the stock location, making changing these coils as easy as possible. If you're running at increased PSI with a supercharger, turbocharger, nitrous, or are burning E85, you need the hottest and strongest spark possible to burn your fuel. With the increased voltage and energy output values, your cylinders will get the spark they need to maximize fuel burn! These ignition coils are available in a variety of power options; order the model recommended for your vehicle.
( 62 )
$24.99
—
$192.92
Summit Racing™ offers ground straps for a variety of applications. These copper straps connect the engine block to the chassis or negative battery terminal, allowing for the completion of the electrical circuit and, consequently, the operation of different vehicle systems. They will also protect your vehicle's electrical components from damage in the even of a power surge or short circuit. Order the kit recommended for your vehicle.
Not Yet Reviewed
$52.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
